Introduzione
The PHYSEN WET03A 1T2 Wireless Signal Forwarding Kit is designed to extend the functionality of your Blink Video Doorbell when operating in fixed wired mode. This kit includes a radio converter and two plug-in receivers, providing an audible and visual alert system for your doorbell presses.
Informazioni importanti sulla sicurezza
- Leggere attentamente tutte le istruzioni prima dell'uso.
- Non esporre il dispositivo a temperature o umidità estreme.
- Ensure proper electrical connections to avoid damage or injury.
- Questo dispositivo è destinato esclusivamente all'uso in ambienti interni.
- Tenere fuori dalla portata dei bambini.
Contenuto della confezione
- 1 x PHYSEN WET03A Radio Converter
- 2 ricevitori plug-in
- 1 x Connection Cable (16 cm long)
Prodotto finitoview e compatibilità
The PHYSEN WET03A 1T2 kit enhances your Blink Doorbell experience by providing a reliable wireless chime system. It offers 58 selectable melodies and 5 adjustable volume levels (0 dB to 110 dB). The system has a long operating range of up to 200 meters (656 feet) and operates effectively between -10°C and 55°C.
It features two bell modes: mute (only LED flashes) and LED + sound (LED flashes and melody plays). A memory function retains your last chosen melody and volume settings after a power outage.
Nota importante sulla compatibilità: This WET03A wireless bell forwarding kit is specifically designed for Blink Video Doorbells operating in fixed wired mode. È non compatibile with Blink doorbells that are already connected to an existing wired doorbell system, nor is it suitable for Blink video doorbells running in battery-only operating mode.
The image illustrates the compatible Blink Video Doorbell model on the left, indicated by a green checkmark, which works with the PHYSEN WET03A kit. The incompatible Blink Video Doorbell (newest gen) is shown on the right with a red 'X' mark.
Istruzioni di installazione
- Ricevitori plug-in: Insert the plug-in receivers into standard electrical outlets within the desired range of your Blink Video Doorbell.
- Connect Converter to Doorbell: Connect the two wires of the PHYSEN WET03A radio converter to the terminals of your Blink Video Doorbell. The converter wires have no fixed polarity, meaning either wire can be connected to either terminal on the doorbell. Ensure your Blink Doorbell is configured for 'mounting with wiring' mode within its application settings.
- Regola la lunghezza del cavo: The connection cable for the WET03A converter is adjustable. If there is excess cable, it can be neatly tucked into the designated hole from which the cable exits on the converter.
- Abbinamento (se necessario): The converter and receivers are typically pre-paired. If they do not connect automatically, refer to the pairing instructions provided in the separate quick start guide (not included in this manual).
Istruzioni per l'uso
- Selecting Melodies: On the receiver, press the 'Music' button (or equivalent) to cycle through the 58 available melodies. To set a melody, press and hold the 'Music' button for approximately 3 seconds.
- Regolazione del volume: Press the 'Volume' button (or equivalent) on the receiver to cycle through the 5 available volume levels, ranging from 0 dB (mute) to 110 dB.
- Bell Modes: The kit supports two operational modes: Modalità silenziosa (only the LED indicator flashes when the doorbell is pressed) and LED + Sound Mode (the LED flashes and the selected melody plays). You can typically switch to mute mode by setting the volume to 0 dB.
- Segnale visivo: In addition to the audible chime, the receiver provides a visual alert by flashing its LED when the doorbell is pressed. This feature is particularly useful in noisy environments or for individuals with hearing impairments.
- Funzione di memoria: The system automatically saves your last selected melody and volume settings. These settings will be retained even after a power outage, eliminando la necessità di riconfigurazione.
Manutenzione
- Clean the devices with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or solvents.
- Keep the devices away from water, excessive moisture, and direct sunlight.
- Ensure proper ventilation around the plug-in receivers.
Risoluzione dei problemi
No Sound or Light from Receiver:
- Assicurarsi che il ricevitore sia correttamente collegato a una presa elettrica funzionante.
- Check if the volume on the receiver is set to 0 dB (mute mode).
- Verify that the converter is correctly wired to the Blink Video Doorbell and that the doorbell is in 'mounting with wiring' mode within its application settings.
- If the connection is lost, re-pair the converter with the receiver according to the pairing instructions.
Breve raggio d'azione:
- Ensure there are no large metal objects, thick walls, or other electronic devices obstructing the wireless signal path between the converter and receivers.
- Relocate the receivers closer to the Blink Video Doorbell and converter if possible.
Incompatible Blink Doorbell:
- This kit is exclusively for Blink Video Doorbells configured for fixed wired mode. It is not compatible with battery-operated Blink doorbells or those already integrated into an existing wired doorbell system.
Specifiche tecniche
| Numero di modello | WET03A 1T2 |
| Marca | FISEN |
| Dimensioni del prodotto | Dimensioni: 9.5 x 9 x 7.7 cm |
| Peso dell'articolo | 230 grammi |
| Tecnologia di connettività | Senza fili |
| Campo di funzionamento | Fino a 200 m (656 piedi) |
| Temperatura di esercizio | -10°C a 55°C |
| Melodie | 58 selezionabili |
| Livelli di volume | 5 (da 0 dB a 110 dB) |
| Fonte di alimentazione | AC (for receivers), Wired (for converter connection to doorbell) |
| Uso interno/esterno | Al chiuso |
Garanzia e supporto
For detailed warranty information, technical support, or customer service inquiries, please contact PHYSEN customer service directly through your retailer or the official PHYSEN website. Please have your product model number (WET03A 1T2) and purchase details ready.