1. Introduzione
The Anern AN-PVI solar inverter offers an economical solution for grid-connected or off-grid photovoltaic installations. Designed as a pure PV inverter, it operates without batteries, making it perfect for areas with a stable grid or daily applications. Key applications include agricultural power supply for water pumps and motor loads thanks to its integrated motor start function, grid connection for power supply via the local grid (check country-specific certification requirements), and hybrid power supply combining solar energy (up to 13.5 kW) with grid/generator for continuity. This manual provides essential information for the safe and efficient use of your inverter.
2. Prodotto finitoview
3. Caratteristiche principali
- Battery-Free Pure PV System: This inverter directly supplies loads with solar energy or in combination with the grid. The battery-free design reduces costs and offers an alternative for users who do not require batteries. Note: It is not possible to connect batteries to this model.
- Dual Independent MPPT: The photovoltaic inverter provides sufficient photovoltaic input to power the load. During the night or when sunlight is insufficient, the power supply can integrate with the electricity grid. The AN-PVI-10000 model features 3x4500W input.
- Generator and Pump Connectivity: The 10,000W inverter can be directly connected to generators and pumps to power loads, making it ideal for agricultural irrigation and outdoor use. It can also be connected to three-phase AC motors.
- Advanced Technical Specifications: Max. PV input power: 13500 W; Voltage range: 60-450 VDC; Max. FV input: 500 VDC; Start voltage >120 V; Recommended FV cable size: 16AWG; Maximum charging current: 50A; MPPT: 2/18A.
- Modulo WiFi opzionale: A WiFi module is available for remote monitoring and control (sold separately).
4. Istruzioni per l'installazione
- Collegamento del circuito: Connect all circuits correctly according to the detailed instructions provided in the full manual. Ensure a dedicated switch is installed for each circuit for safety and control.
- Start-up Sequence:
- First, start the inverter.
- Next, open the switches for the photovoltaic (solar panel) input.
- Then, open the switch for the electricity grid connection.
- Finally, open the switches for the connected loads.
- Shut-down Sequence: To shut down the system, follow the start-up sequence in reverse order.
Note: Always refer to the complete installation guide for detailed wiring diagrams and safety precautions. Professional installation is recommended.
5. Linee guida operative
- Compatibilità del carico: The starting power of devices with sensitive loads must be at least three times the nominal power of the inverter. Exceeding the inverter's power capacity during start-up can cause damage.
- Monitoraggio: Utilize the integrated LCD display to monitor system status, power output, and other operational parameters. If an optional WiFi module is installed, remote monitoring via a dedicated application is possible.
- Grid Integration: The inverter is designed to seamlessly integrate with the electricity grid, providing power to loads from solar or the grid as available.
6. Manutenzione
To ensure optimal performance and longevity of your Anern Hybrid Solar Inverter, regular maintenance is recommended. This typically includes:
- Ispezione visiva: Periodically inspect the inverter and all connected cables for any signs of damage, wear, or loose connections.
- Pulizia: Keep the inverter's ventilation openings clear of dust and debris to prevent overheating. Use a soft, dry cloth for cleaning the exterior. Do not use liquid cleaners.
- Condizioni ambientali: Ensure the inverter is operating within its specified environmental conditions (temperature, humidity) to prevent performance degradation or damage.
- Aggiornamenti del firmware: Controllare il produttore website or contact support for any available firmware updates to ensure your inverter has the latest features and bug fixes.
Always disconnect power before performing any maintenance or cleaning. If you suspect any issues, contact qualified personnel.
7. Risoluzione Dei Problemi
If you encounter issues with your Anern Hybrid Solar Inverter, consider the following general troubleshooting steps:
- Nessuna potenza in uscita: Check all circuit breakers and switches to ensure they are in the ON position. Verify that solar panels are receiving sufficient sunlight and that grid power is available if configured for hybrid operation.
- Codici di errore sul display: Per un elenco dei codici di errore specifici e delle relative soluzioni, fare riferimento al manuale completo del prodotto.
- L'inverter non si avvia: Ensure the start-up sequence is followed correctly (inverter first, then PV, grid, and loads). Check the input voltage from the PV array to ensure it meets the minimum start voltage requirement (>120 VDC).
- Protezione da sovraccarico: If the inverter shuts down due to an overload, reduce the connected load. Remember that the starting power of sensitive devices can be significantly higher than their nominal power.
- Generator Connection Issues: If experiencing problems with generator charging, verify the parameters are correctly configured for generator input. Consult the detailed manual for specific settings.
For persistent issues or complex problems, it is recommended to contact Anern customer support or a qualified technician.
8. Specifiche tecniche
| Caratteristica | Valore |
|---|---|
| Numero di modello | AN-PVI-10000W |
| Marca | Anern |
| Dimensioni del prodotto (L x P x A) | 42L x 20B x 50A cm |
| Peso dell'articolo | 8 chilogrammi |
| Fonte di energia | Alimentato ad energia solare |
| Cosatage | 10000 watt |
| Potenza di uscita | 10000 Watt |
| Potenza di uscita massima | 10000 Watt |
| Volume di uscitatage | 230 Volt AC (VAC) |
| Forma d'onda di uscita elettrica | Onda sinusoidale pura |
| Efficienza | 98% |
| Potenza massima in ingresso FV | 13500 L |
| PV voltage Gamma | 60-450 VCC |
| Max. FV Input | 500 VCC |
| Volume inizialetage | >120 V |
| Recommended FV Cable Size | Cavo AWG 16 |
| Corrente di carica massima | 50A |
| MPPT | 2/18A |
| Conformità | CE |
| Componenti inclusi | Manuale di istruzioni |
9. Garanzia e supporto
Anern Industry Group Limited has 14 years of experience in solar energy storage for residential and commercial purposes, developing scientific solutions tailored to each customer. Anern has professional research and development teams of solar energy pioneers, with megawatt solar capacity installed in over 200 countries and regions, and offers OEM/ODM services.
Delivery is via DHL courier from our warehouse in continental Europe, ensuring you receive the solar inverter within 3-10 days. Our inverters are covered by a Servizio di riparazione di 3 anni.
If a problem occurs with the inverter, please send a video of the fault. Our technicians will then determine the cause of the fault for you and guide you through the repair process.
For further assistance, please contact Anern customer support.
10. Video sulle caratteristiche del prodotto
Questo video fornisce un overview of the Anern Hybrid Solar Inverter's design, key features, and technical advantages. It highlights the curved shell design, ease of installation, high-quality components, dual AC output interface, and efficient MPPT solar controller with a wide PV input voltage range. The video also mentions the maximum input power for different EVO series models and the increased charging efficiency.
