Manuale utente del caricabatterie e avviatore di emergenza 9 in 1 LOKITHOR JC400

1. Introduzione

Thank you for choosing the LOKITHOR JC400 9-in-1 Jump Starter and Battery Charger. This versatile device is engineered to provide reliable power solutions for your automotive needs, combining jump starting, battery charging, and portable power bank functionalities. To ensure safe and optimal performance, please read this manual thoroughly before operation and retain it for future reference.

Immagine: The LOKITHOR JC400 unit and its protective storage case.

2. Informazioni importanti sulla sicurezza

Always observe the following safety precautions to prevent electric shock, explosion, fire, and property damage. Failure to follow these instructions may result in serious injury or death.

• Leggere tutte le istruzioni prima di utilizzare il prodotto.
• Non utilizzare l'unità se è danneggiata.
• Tenere fuori dalla portata dei bambini.
• Quando si lavora con le batterie, indossare occhiali protettivi e guanti.
• Ensure proper ventilation during charging and jump starting.
• The LOKITHOR JC400 features ConnectMax Technology with 10 advanced protections: Spark-Proof, Reverse-Charge, Over-Charge, Over-Current, Short-Circuit, Reverse-Polarity, Low-Temp, High-Temp, Over-Voltage, and Over-Load Protection. While these features enhance safety, always exercise caution.

Immagine: The LOKITHOR JC400 highlighting its ConnectMax Technology for enhanced safety during operation.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti e integri al momento dell'apertura del pacco:

• LOKITHOR JC400 Jump Starter and Battery Charger Unit (x1)
• Jumper Cables (x1)
• Cavo di alimentazione CA (x1)
• Cavo da USB-A a USB-C (x1)
• Manuale utente (x1)
• Borsa portaoggetti (x1)

Immagine: All components included in the LOKITHOR JC400 package, neatly arranged within the storage case.

4. Prodotto finitoview

The LOKITHOR JC400 is a compact and robust device designed for various automotive and portable power needs. It features an intuitive display and multiple ports for diverse functionalities.

4.1. Disposizione del dispositivo

Immagine: The LOKITHOR JC400 demonstrating its ultra-compact design, making it easy to carry.

The unit is designed for portability and durability, featuring a robust casing and a clear digital display. Key elements include:

• Display digitale: Mostra lo stato della batteria, voltage, current, and selected modes.
• Pulsanti di controllo: Power, Light, Mode selection.
• Porta di avvio rapido: For connecting jumper cables.
• Uscita USB-A: Per caricare dispositivi esterni.
• Ingresso/uscita USB-C: Per caricare l'unità o dispositivi esterni.
• Ingresso CA: For charging the unit via AC power cord.
• Luce LED: Luce di emergenza multimodale.
• Bussola: Integrato per l'assistenza alla navigazione.

5. Configurazione e ricarica iniziale

Before first use, fully charge the LOKITHOR JC400. This ensures optimal performance and extends battery life.

1. Connect the AC Power Cord to the AC input port on the JC400.
2. Plug the other end of the AC Power Cord into a standard wall outlet.
3. Il display digitale indicherà lo stato di carica. Caricare finché l'indicatore della batteria non indica il livello massimo.

Alternatively, you can charge the unit using the USB-C port with a compatible USB-C charger.

6. Istruzioni per l'uso

6.1. Avviamento di emergenza di un veicolo

The LOKITHOR JC400 can jump start 12V vehicles with up to 8.5L gas or 6.5L diesel engines.

1. Ensure the JC400 is sufficiently charged.
2. Connect the jumper cables to the jump start port on the JC400.
3. Allega il rosso clamp al terminale positivo (+) della batteria del veicolo.
4. Allega il nero clamp to the vehicle's negative (-) battery terminal or a solid, unpainted metal part of the engine block.
5. Once connected, the JC400 will automatically detect the battery voltage. If the battery is extremely low (below 1V), activate Force Charging Mode by long-pressing the 'Mode' button for 5 seconds.
6. Avviare il veicolo.
7. Una volta avviato il veicolo, scollegare immediatamente il cavo neroamp, poi il rosso clamp, and finally disconnect the jumper cables from the JC400.

Immagine: The LOKITHOR JC400 connected to a vehicle battery, ready to jump start.

Immagine: Activating the Force Charging Mode on the LOKITHOR JC400 for deeply discharged batteries.

6.2. Battery Charging and Maintaining

The JC400 functions as a smart battery charger, maintainer, and desulfator for 6V/12V regular, 12V AGM, and 12V lithium batteries.

1. Connect the jumper cables to the JC400 and then to the battery terminals (red to +, black to -).
2. Connect the JC400 to an AC power source using the AC Power Cord.
3. Use the 'Mode' button to select the appropriate battery type (12V, 12V AGM, 12V Lithium, 6V) and charging current (0.75A, 1A, 2A). The display will show the selected settings.
4. The unit will automatically begin charging and maintaining the battery.

Immagine: The LOKITHOR JC400 actively charging and maintaining a car battery, displaying its smart features.

6.3. Funzione Power Bank portatile

Use the JC400 to charge your mobile devices.

• Connect your device to the USB-A output (5V=3A) or USB-C input/output (5V=3A) port using a compatible USB cable.
• The JC400 will automatically begin charging your device.

6.4. Funzionamento della luce LED

The integrated 300 Lumen LED light offers multiple modes for various situations.

• Press the 'Light' button to cycle through the modes: 100% brightness, 50% brightness, 10% brightness, SOS, Blink, Strobe.
• Press and hold the 'Light' button to turn off the light.

Immagine: The LOKITHOR JC400's powerful 300 Lumen LED light, illustrating its different brightness and emergency modes.

6.5. Compass Function

The built-in compass provides basic directional guidance. Ensure the unit is held level for accurate readings.

7. Manutenzione

• Pulizia: Pulire l'unità con un panno asciutto e morbido. Non utilizzare prodotti chimici aggressivi o materiali abrasivi.
• Magazzinaggio: Store the JC400 in its storage bag in a cool, dry place away from direct sunlight and extreme temperatures.
• Ricarica: Per una salute ottimale della batteria, ricaricare l'unità ogni 3-6 mesi, anche se non viene utilizzata.
• The unit is designed to be dustproof and waterproof, but avoid submerging it in water.

Immagine: The LOKITHOR JC400's durable storage case, highlighting its water-resistant properties.

8. Risoluzione Dei Problemi

In caso di problemi, fare riferimento ai seguenti problemi comuni e alle relative soluzioni:

9. Specifiche

• Corrente di picco: 2500A
• Jump Start Capacity: Up to 8.5L Gas / 6.5L Diesel 12V vehicles
• Uscita caricabatterie: 0.75 A / 1 A / 2 A.
• Compatibilità della batteria: 6V/12V Regular, 12V AGM, 12V Lithium
• Uscita USB-A: 5V=3A
• Ingresso/uscita USB-C: 5V=3A
• Luce LED: 300 Lumen, 6 modes
• Temperatura di esercizio: Da -4°C a 140°C (da -20°F a 60°F)
• Protezioni di sicurezza: Spark-Proof, Reverse-Charge, Over-Charge, Over-Current, Short-Circuit, Reverse-Polarity, Low-Temp, High-Temp, Over-Voltage, Over-Load Protection.

10. Garanzia e supporto

LOKITHOR stands behind the quality of its products.

• Garanzia: 1-Year Replacement Promise.
• Assistenza clienti: 24h Service Support is available for any inquiries or assistance. Please refer to the contact information provided on the LOKITHOR official website or your product packaging for support details.