1. Introduzione
The Uwell Typhos Pod System Kit is a compact and high-performance vaping device designed for both RDL (Restricted Direct Lung) and MTL (Mouth-to-Lung) vaping styles. It integrates a powerful 2000mAh battery with a maximum output of 45W, a 6ml side-fill pod, and a clear 1.05-inch OLED screen for real-time information. This manual provides essential instructions for safe and effective use of your Typhos device.

Image 1.1: The Uwell Typhos Pod System Kit in Polar Black.
2. Prodotto finitoview
2.1 Contenuto della confezione
- Typhos Main Unit x1
- 0.3Ω Dual Mesh Coil 6ml Pod x1
- 0.6Ω Single Mesh Coil 6ml Pod x1
- Cavo di ricarica USB-C x1
- Manuale utente x1
- meihen Vape Band x1
2.2 Caratteristiche principali
- Batteria: Built-in 2000mAh for extended use.
- Potenza di uscita: Regolabile da 5W a 45W.
- Capacità del baccello: Large 6ml capacity reduces refill frequency.
- Metodo di riempimento: Convenient side-fill design.
- Ricarica: Fast USB-C charging, approximately 40 minutes for a full charge.
- Display: 1.05-inch OLED screen for real-time information (battery, wattage, puff count).
- Prevenzione delle perdite: CoreShield leak-proof technology.
- Flusso d'aria: Stepless adjustable airflow for precise draw control.
- Modalità di uscita: Two modes available: WAVE (energy-saving, stable output) and STORM (powerful burst).
- Compatibilità bobina: Supports 0.3Ω Dual Mesh (25-45W), 0.6Ω Single Mesh (13-25W), and 0.8Ω Single Mesh (10-18W) coils.

Image 2.1: Illustration of the 6ml pod and 2000mAh battery capacity.

Image 2.2: Close-up of the Real Dual Mesh Coil, highlighting its structure and power output.

Image 2.3: Diagram illustrating the CoreShield leak prevention technology within the pod.

Image 2.4: The 1.05-inch OLED screen displaying device information.

Image 2.5: The stepless airflow control mechanism on the Typhos device.
3. Impostazione
3.1 Ricarica del dispositivo
Before first use, fully charge the Typhos device. Connect the provided USB-C charging cable to the charging port on the device and to a suitable power source. The OLED screen will indicate the charging status. A full charge takes approximately 40 minutes.
3.2 Installazione del Pod
- Assicurarsi che il dispositivo sia spento.
- Insert the desired pod (0.3Ω or 0.6Ω) firmly into the device. It will magnetically snap into place.
3.3 Riempimento del baccello
- Rimuovere il pod dal dispositivo.
- Locate the side-fill port on the pod.
- Open the silicone plug and carefully fill the pod with your e-liquid.
- Chiudere bene il tappo in silicone per evitare perdite.
- After filling a new pod or coil, wait at least 5-10 minutes before vaping to allow the coil to saturate with e-liquid. This prevents dry hits and extends coil life.

Image 3.1: Illustration of the side-fill mechanism and various compatible coil options for RDL and MTL vaping.
4. Istruzioni per l'uso
4.1 Accensione/spegnimento
Press the fire button 5 times rapidly to power the device on or off.
4.2 Regolazione dell'acquatage
Utilizzare i pulsanti di regolazione (solitamente situati sotto lo schermo) per aumentare o diminuire l'acquatage. The current wattage setting will be displayed on the 1.05-inch OLED screen. The device supports a wattagGamma da 5W a 45W.
4.3 Mode Selection (WAVE/STORM)
The Typhos offers two distinct output modes:
- WAVE Mode: Provides an energy-saving and stable output for consistent flavor.
- STORM Mode: Delivers a powerful burst for a more intense vaping experience.
Refer to the on-screen menu or user interface to switch between these modes.
4.4 Regolazione del flusso d'aria
The device features stepless adjustable airflow. Locate the airflow control slider or ring on the device and adjust it to your preferred draw tightness, ranging from a tight MTL draw to a more open RDL draw.
4.5 Svapare
Inhale through the mouthpiece to activate the auto-draw feature, or press and hold the fire button while inhaling. Release the button when you finish inhaling.
Video 4.1: Official Uwell TYPHOS POD System overview, demonstrating key features and operation.
5. Manutenzione
5.1 Pulizia
- Regularly clean the pod and the device's contact points with a dry cloth or cotton swab to prevent e-liquid buildup.
- Ensure no e-liquid enters the charging port or airflow channels.
5.2 Sostituzione della bobina
Replace the coil when you notice a burnt taste, reduced vapor production, or diminished flavor. To replace:
- Rimuovere il pod dal dispositivo.
- Pull out the old coil from the bottom of the pod.
- Insert a new coil firmly into the pod.
- Refill the pod with e-liquid and allow it to sit for 5-10 minutes before use.
5.3 Migliori pratiche di addebito
- Utilizzare solo il cavo USB-C fornito.
- Evitare di sovraccaricare o scaricare completamente la batteria per prolungarne la durata.
5.4 Conservazione
Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme. Tenere fuori dalla portata di bambini e animali domestici.
6. Risoluzione Dei Problemi
6.1 No Vapor / Weak Vapor
- Controllare la batteria: Assicurati che il dispositivo sia carico.
- Check Pod Connection: Re-seat the pod firmly.
- Check E-liquid Level: Refill if low.
- Controllare la bobina: Replace the coil if it's old or burnt.
- Controlla Wattage: Regola wattage to the recommended range for your coil.
6.2 Perdite
- Check Silicone Plug: Ensure the side-fill plug is securely closed.
- Check Coil Installation: Make sure the coil is properly seated.
- Evitare di riempire troppo: Do not overfill the pod.
- Preparazione corretta: Ensure the coil is adequately primed before first use.
6.3 Device Not Turning On / Charging
- Controllare il cavo di ricarica: Use the original USB-C cable and ensure it's properly connected.
- Porta di ricarica pulita: Remove any debris from the charging port.
- Ciclo di alimentazione: Try turning the device off and on again (5 clicks).
7. Specifiche
| Capacità della batteria | 2000 mAh (integrato) |
| Potenza di uscita | 5W - 45W (regolabile) |
| Capacità del baccello | 6ml |
| Porta di ricarica | Tipo C |
| Display | Schermo OLED da 1.05 pollici |
| Dimensioni | Dimensioni: 11.02 x 3.16 x 2.05 cm |
| Peso | 200g |
| Bobine compatibili | 0.3Ω Dual Mesh (25-45W), 0.6Ω Single Mesh (13-25W), 0.8Ω Single Mesh (10-18W) |
8. Garanzia e supporto
This product includes a meihen vape band and a security code to verify its authenticity. For warranty claims or technical support, please refer to the contact information provided by your retailer or the official Uwell websito. Conservare la prova d'acquisto per eventuali domande relative alla garanzia.
Note: This product does not contain nicotine or e-liquid.