Manuali+

Uckazy 5 Series & 7 Series NBT

Uckazy 15.8 Inch Android Auto Radio Instruction Manual

For BMW 5 & 7 Series F10 F11 F01 NBT (2013-2016)

1. Introduzione

This manual provides detailed instructions for the installation, setup, operation, and troubleshooting of your Uckazy 15.8 Inch Android Auto Radio. Please read this manual thoroughly before installation and use to ensure proper function and to avoid damage.

2. Modelli e anni compatibili

This device is designed for specific BMW models and years. Please verify your vehicle's compatibility before proceeding with installation.

  • BMW Serie 5: F10, F11 (2013-2017) with NBT system
  • BMW Serie 7: F01, F02 (2013-2017) with NBT system

Nota:

  • Before purchase, please ensure your car system is NBT. If unsure, contact customer support.
  • This unit is compatible with BMW 520i, 525i, 528i models from 2013-2016.
Compatible BMW Models and NBT System Identification
Image: Compatible BMW Models and NBT System Identification. This image shows the compatible BMW 5 Series F10 (2013-2017) and 7 Series F01 F02 (2013-2017) with NBT system, identified by a 6-pin LVDS Port. It also shows an incompatible CIC system with a 4-pin LVDS Port.

3. Caratteristiche del prodotto

  • Schermo: Ultra-narrow 15.8-inch (1920*720) IN-CELL screen with full lamination technology for enhanced transparency and reduced reflection (75%). Made of zinc alloy for high strength, wear resistance, and vibration absorption.
  • Doppio sistema: One-click switch between Linux system and original car system. Retains original car radio, amplifier function, factory steering wheel control, original car mouse knob, display of speed, fuel level, oil pressure, safety warnings, and original reverse camera. No software changes to the vehicle's control unit.
  • CarPlay e Android Auto: Supports wireless (wired) Apple CarPlay, wireless (wired) Android Auto, and wireless MirrorLink for iOS and Android phones. Features Bluetooth 5.0 and Wi-Fi. Access map navigation, phone contacts, email, notifications, music, and voice assistants (Siri/Google Voice Assistant).
  • DSP integrato: 16 EQ segments for enhanced audio effects including reverberation, equalization, compression, and delay.
  • Funzione della fotocamera: Compatible with OEM reversing camera parking radar. Supports aftermarket reverse camera and front view telecamera DVR (ingresso CVBS).
  • Modalità giorno e notte: Automatic light sensitivity adjusts display mode according to your car's original headlights.
Caratteristiche del prodotto Fineview
Image: Product Features Overview. This image displays the key features of the 15.8-inch Linux system car touchscreen, including OEM Car Radio Interface, CarPlay, Android Auto, Mirrorlink, Bluetooth, Reverse Camera support, Touch Screen, Music, Linux System, Video, Phone, and Messaging.
Original BMW System Support
Image: Original BMW System Support. This image highlights the retention of original BMW features such as the original car knob, steering wheel buttons, hand-touch control, factory rear view telecamera, amplifier system, and original Bluetooth.

4. Guida all'installazione

Follow these steps carefully for proper installation. It is recommended to watch the provided installation video for visual guidance.

4.1 Smontaggio

  1. Use an installation tool to pry open and remove the upper shell and air conditioning vents.
  2. Disconnect all wires connected to the panel.
  3. Remove the screws securing the OEM screen and carefully remove the screen.
  4. Disconnect the wires connected to the OEM screen.
  5. Remove the screws securing the CD host and take out the CD host.
  6. Scollegare il cavo di alimentazione originale dall'unità principale.
Video: NBT-15.8' ultra narrow BMW carplay installation process. This video provides a step-by-step guide on how to disassemble the original car components, including removing the upper shell, air conditioning vents, OEM screen, and CD host, and disconnecting the necessary cables.

4.2 Cablaggio

  1. Route the new power cable inside the vehicle structure.
  2. Connect the new power cable with the CD host and the original power cable.
  3. Take the USB cable and connect the bm168 port to the screen.
  4. Connect the cables to the new 10.25-inch or 12.3-inch screen.
Schema elettrico
Image: Wiring Diagram. This diagram illustrates the wire definition and linking process for the car machine system. It shows connections for 360-DET, ACC-OUT, Rear-Camera-PWR, and GND. It also details how to connect with fiber optic cables by unplugging the 2P fiber optic harness from the original car CD and inserting it into the Linux system harness.
USB Connection for CarPlay/Android Auto
Image: USB Connection for CarPlay/Android Auto. This image shows that USB1 is for data link (CarPlay/Android Auto) and USB2 is for read storage link. It also provides a solution for noise in sound by connecting with AB.

4.3 Screen Installation & Reassembly

  1. Install the new 10.25-inch or 12.3-inch screen into the dashboard.
  2. Insert the screws through the fixing holes at the bottom of the screen tightly.
  3. Connect the wires of the key panel and reinstall it.
  4. Fix the screws for the key panel.
  5. Connect the wires of the upper shell and reinstall the upper shell.

Note: Do not miss installing any screws during reassembly.

5. Test funzionali

Before proceeding with the subsequent installation steps, we recommend testing all functions of the device screen. Detailed functional testing steps can be found in the troubleshooting section of this user manual.

6. Impostazione

6.1 Connessione wireless CarPlay/Android Auto

  1. Connect your phone via Bluetooth to the unit.
  2. Allow all necessary permissions and wait for the connection to establish.
Passaggi per la connessione wireless CarPlay
Image: Wireless CarPlay Connection Steps. This image shows the two steps for wireless CarPlay: 1. Connect Bluetooth, 2. Allow all permissions and wait for connection.

6.2 Sound Settings (AUX)

To ensure sound output from the new system, proper AUX connection and settings are crucial.

  1. Plug the audio connection cable (included in the package) into the AUX socket in the armrest compartment.
  2. Go to the unit's settings and turn off the AUX auto switching setting.
  3. In the OEM system, go to