VEVOR 15000 Lumen Three-Head LED Work Light with Tripod Stand

Introduzione

Thank you for choosing the VEVOR 15000 Lumen Three-Head LED Work Light. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your work light. Please read this manual thoroughly before use and retain it for future reference.

Istruzioni di sicurezza

• Sicurezza elettrica: Assicurarsi che la fonte di alimentazione corrisponda al voltage requirements of the light. Do not operate with damaged cords or plugs. Always unplug the light before cleaning or maintenance.
• Posizionamento: Position the tripod on a stable, level surface to prevent tipping. Avoid placing the light near flammable materials.
• Calore: Although LED lights generate less heat than traditional halogen, the light heads can still become warm during operation. Avoid touching the light heads directly when in use.
• Resistenza all'acqua: This product is IP65 rated for water and dust resistance, suitable for outdoor use in various weather conditions. However, avoid submerging the unit in water.
• Bambini e animali domestici: Tenere la lampada da lavoro fuori dalla portata dei bambini e degli animali domestici.
• Uso previsto: Use this product only for its intended purpose as a work light. Do not modify the unit.

Contenuto della confezione

Verificare che tutti gli articoli siano presenti al momento del disimballaggio:

• 1 x Three-Head LED Work Light Assembly
• 1 supporto per treppiede
• 1 x Manuale utente (questo documento)
• 1 x 35mm Bolt
• Bulloni da 4 x 25 mm
• 1 x chiave esagonale

Prodotto finitoview

The VEVOR LED Work Light features three independently adjustable light heads mounted on a height-adjustable tripod stand, providing versatile illumination for various tasks.

Image: The VEVOR 15000 Lumen Three-Head LED Work Light fully assembled on its tripod stand.

Caratteristiche principali:

• Alta luminosità: 15,000 lumens output for wide area illumination.
• Temperatura colore regolabile: 6000K-6500K for clear, bright white light.
• Independent Light Heads: Each of the three light heads can be individually switched and adjusted for angle.
• Treppiede regolabile in altezza: Si estende da 43.31 pollici (110 cm) a 70.87 pollici (180 cm).
• Costruzione durevole: Grado di protezione IP65 contro acqua e polvere per uso esterno.
• Cavo di alimentazione lungo: 10.83 ft (3.3 m) power cord for extended reach.

Image: Illustration showing the 15,000 lumens brightness and 6000-6500K adjustable color temperature of the VEVOR LED Work Light.

Image: Diagram illustrating the multi-angle independent adjustment of the three light heads (180° vertical and horizontal), showing 70 LEDs per light head and the extra-long 10.83 ft power cord.

Image: Illustration of the height-adjustable tripod stand, demonstrating its stable design and showing the adjustment range from 43.31 inches (minimum) to 70.87 inches (maximum).

Image: The VEVOR LED Work Light demonstrating its rugged construction and IP65 waterproof and dustproof rating in a rainy outdoor environment.

Istruzioni di installazione

1. Disimballare i componenti: Estrarre con cautela tutti i componenti dall'imballaggio e verificarne il contenuto consultando l'elenco "Contenuto della confezione".
2. Montare il treppiede: Extend the legs of the tripod stand until they are fully spread and stable. Secure any locking mechanisms on the tripod legs.
3. Attach Light Bar to Tripod: Place the light bar assembly onto the top of the tripod stand. Align the mounting holes. Use the provided 35mm bolt and hex wrench to secure the light bar to the tripod.
4. Teste luminose sicure: The three light heads are pre-attached to the light bar. Ensure they are securely fastened.
5. Regola l'altezza: Allentare la leva di regolazione dell'altezzaamps on the tripod pole, extend the pole to the desired height (between 43.31 in and 70.87 in), and securely tighten the clamps.
6. Position Light Heads: Adjust the angle of each light head vertically and horizontally as needed. The individual switches are located on each light head.
7. Connetti alimentazione: Plug the power cord into a suitable electrical outlet. Ensure the outlet meets the product's power requirements.

Immagine: Un completo view of the VEVOR LED Work Light, illustrating the assembled tripod stand and the three light heads with their wiring.

Istruzioni per l'uso

1. Accensione/spegnimento: Once plugged in, use the individual switch located on each light head to turn it on or off.
2. Regola l'angolazione della luce: Each light head can be independently rotated 180 degrees vertically and horizontally to direct light precisely where needed.
3. Regola l'altezza: To change the height of the light, loosen the clamps on the tripod pole, adjust to the desired height, and re-tighten the clampcon fermezza.
4. Regolazione della luminosità: The light provides a fixed brightness of 15,000 lumens. There is no adjustable brightness feature on this model.

Immagine: Examples of the VEVOR LED Work Light in use, demonstrating its versatility for both indoor tasks like auto repair and outdoor applications such as construction.

Manutenzione

• Pulizia: Disconnect the power before cleaning. Wipe the light heads and stand with a soft, damp panno. Non usare detergenti abrasivi o solventi.
• Magazzinaggio: When not in use, fold the tripod stand and store the work light in a dry, cool place away from direct sunlight.
• Ispezione del cavo: Regularly inspect the power cord for any signs of damage, fraying, or cuts. If damaged, discontinue use and replace the cord by a qualified technician.
• Elementi di fissaggio: Controllare periodicamente tutti i bulloni e le vitiampper garantire che siano ben saldi e sicuri.

Risoluzione dei problemi

Specifiche

Image: Diagram illustrating the dimensions and key specifications of the VEVOR LED Work Light, including item model number, rated power, brightness, color temperature, LED quantity, power cord length, net weight, and single light dimensions.

Garanzia e supporto

This VEVOR product comes with a 2-year warranty from the date of purchase. For warranty claims, technical support, or replacement parts, please contact VEVOR customer service. Keep your purchase receipt as proof of purchase.

Per maggiori informazioni, visita il negozio ufficiale VEVOR: Negozio VEVOR su Amazon