ORICO AP42F

ORICO AP42F Magnetic Card Reader & M.2 SSD Enclosure User Manual

Model: AP42F | Brand: ORICO

Introduzione

This manual provides detailed instructions for the ORICO AP42F Magnetic Card Reader and M.2 SSD Enclosure. Please read this manual thoroughly before using the product to ensure proper operation and to maximize its features. This device combines a TF/SD 3.0 card reader with an M.2 NVMe SSD enclosure, offering high-speed data transfer and PD 100W charging capabilities, designed for compatibility with various Type-C devices including iPhone 15/16/17 Pro series, iPads, MacBooks, and Android devices.

Prodotto finitoview

Caratteristiche principali

  • Funzionalità 5 in 1: Combines TF/SD 3.0 card reader and M.2 NVMe SSD enclosure.
  • Trasferimento dati ad alta velocità: USB 3.2 Gen2 interface supporting up to 10Gbps for SSDs and 104MB/s for SD/TF cards.
  • Erogazione di potenza (PD) da 100 W: Supports up to 100W power input and 85W output for simultaneous charging and data transfer.
  • Attacco magnetico: Features 17 built-in magnets for secure and stable attachment to compatible devices, especially iPhone Pro models.
  • Compatibilità SSD: Supports M.2 NVMe (M-key) SSDs in 2230 and 2242 form factors.
  • Ampia compatibilità del dispositivo: Compatible with iPhone 15/16/17 Pro/Pro Max, iPad Pro, MacBook, Android phones, laptops, and tablets with Type-C ports.

Contenuto della confezione

  • ORICO Magnetic M.2 NVMe SSD Enclosure
  • Cavo USB-C a USB-C da 0.3 m
  • Magnetic Ring (for non-magnetic devices)
  • Cuscinetto termico
  • Viti
  • Cacciavite
  • Manuale d'uso

Diagramma del prodotto

ORICO AP42F Product Overview with labeled ports and features
Figura 1: Oltreview of the ORICO AP42F, showing the TF 3.0 slot, SD 3.0 slot, USB 3.2 Gen2 port, PD 100W port, and magnetic suction ring area. It also indicates compatibility with SSD 2230/2242.

Impostare

Installing an M.2 NVMe SSD

  1. Carefully open the SSD enclosure.
  2. Insert your M.2 NVMe (M-key) SSD (2230 or 2242 form factor) into the slot. Ensure it is fully seated.
  3. Fissare l'SSD con la vite in dotazione.
  4. Apply the thermal pad to the SSD for optimal heat dissipation.
  5. Chiudere saldamente la custodia.

Nota: The SSD is not included and must be purchased separately. For optimal performance and to prevent disconnections, especially with phone USB ports, use SSDs with power consumption of 4.5W or less. For higher power SSDs, external power via the PD port is required.

Attaching to a Device

  • For iPhones 15/16/17 Pro/Pro Max, the enclosure can magnetically attach directly to the back of the phone.
  • For other devices or non-magnetic phone cases, use the included magnetic ring. Peel off the adhesive backing and attach the ring to the back of your device or case where you intend to mount the enclosure.
Magnetic attachment of ORICO AP42F to an iPhone
Figure 2: Demonstrates the magnetic attachment of the enclosure to a smartphone, highlighting the 17 powerful magnets and the optional universal magnetic adapter ring.

Istruzioni per l'uso

Connessione al tuo dispositivo

  1. Connect the ORICO AP42F to your host device (iPhone, iPad, MacBook, PC, etc.) using the provided USB-C cable.
  2. Assicurati che la connessione sia sicura. Il dispositivo dovrebbe essere riconosciuto automaticamente dal sistema operativo.

Using the M.2 SSD Enclosure

  • Once connected, the installed M.2 SSD will appear as an external storage device.
  • Ora puoi trasferire files to and from the SSD at speeds up to 10Gbps.
  • For iPhone 15 Pro series and later, the enclosure supports direct ProRes 4K 60/120fps video recording to the SSD.
iPhone recording ProRes 4K video directly to the ORICO AP42F SSD enclosure
Figure 3: Illustrates an iPhone recording ProRes 4K 60/120fps video directly to the connected ORICO AP42F SSD enclosure, enabling direct backup and extended recording.
High-speed data transfer demonstration with ORICO AP42F
Figure 4: Shows the ORICO AP42F connected to a laptop, demonstrating high-speed data transfer up to 10 Gbit/s (1000 MB/s) for various file tipi.

Using the TF/SD Card Reader

  1. Insert your TF (MicroSD) or SD card into the corresponding slot on the enclosure.
  2. The card will appear as a separate external drive.
  3. Trasferire filea velocità fino a 104 MB/s.
ORICO AP42F SD 3.0 card reader speed demonstration
Figure 5: Illustrates the SD 3.0 card reader functionality of the ORICO AP42F, showing read speeds up to 104 MB/s, significantly faster than SD 2.0.

Using the PD 100W Charging Port

  • Connect a USB-C power adapter (up to 100W) to the PD port on the enclosure.
  • This will provide power to both the enclosure and the connected host device (up to 85W output), allowing for simultaneous data transfer and charging.
ORICO AP42F with PD 100W fast charging
Figure 6: Depicts the ORICO AP42F connected to an iPhone and a 100W PD power source, demonstrating fast charging capabilities while the device is in use.

Manutenzione

  • Mantenere l'involucro pulito e privo di polvere. Utilizzare un panno morbido e asciutto per la pulizia.
  • Evitare di esporre il dispositivo a temperature estreme, umidità o luce solare diretta.
  • Ensure proper ventilation, especially during extended use, to prevent overheating of the SSD. The thermal pad helps with this.
  • Maneggiare con cura per evitare danni fisici.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
Dispositivo non riconosciutoLoose connection, incompatible SSD, driver issue, SSD not properly installed.
  • Assicurarsi che il cavo USB-C sia collegato saldamente sia all'alloggiamento che al dispositivo host.
  • Verify that the installed SSD is an M.2 NVMe (M-key) 2230/2242.
  • Check if the SSD is properly seated and secured inside the enclosure.
  • Try connecting to a different USB-C port or another device.
  • For Windows, check Device Manager for any driver issues.
Frequent disconnections during use (especially with phones)SSD power consumption exceeds phone's USB port limit.
  • Connect an external power source (PD charger) to the enclosure's PD port.
  • Consider using an SSD with lower power consumption (4.5W or less) if external power is not feasible.
Velocità di trasferimento dati lentaUSB port limitation, cable quality, SSD performance, host device limitations.
  • Ensure your host device's USB-C port supports USB 3.2 Gen2 (10Gbps).
  • Use the provided high-quality USB-C cable.
  • Verify the performance specifications of your installed SSD.
  • Close other demanding applications on your host device.
L'attacco magnetico è deboleDevice not magnetic, thick case, incorrect placement of magnetic ring.
  • Ensure your device (e.g., iPhone Pro) has a magnetic back or use the provided magnetic ring.
  • If using the magnetic ring, ensure it is securely attached to a clean, flat surface on your device or case.
  • Avoid very thick phone cases that might interfere with magnetic strength.

Specifiche

CaratteristicaDettaglio
MarcaORICO
ModelloAP42F
MaterialeAlluminio
Compatibilità SSDM.2 NVMe (M-key) 2230/2242
Lettore di schedeTF 3.0, SD 3.0
Data Transfer Rate (SSD)Fino a 10 Gbps (USB 3.2 Gen2)
Data Transfer Rate (Card Reader)Fino a 104 MB/s
Erogazione di potenza (PD)Input: 100W, Output: 85W
Dispositivi compatibiliiPhone 15/16/17 Pro/Pro Max, iPad Pro, MacBook, Android phones, Laptops, Tablets (Type-C)
Sistemi operativi supportatimacOS, iOS, Windows, Linux, Android
Caratteristica specialeCompact, Magnetic Attachment (17 magnets)
ORICO AP42F comprehensive compatibility chart
Figure 7: Detailed compatibility chart for the ORICO AP42F, showing supported SSD protocols (NVMe M-Key), SSD formats (2242, 2230), compatible devices (iPhone 15/16/17 series, iPad, Laptop, Android Phone, Desktop PC), supported card types (MicroSD, SD), and operating systems (Mac OS, iOS, Windows, Linux, Android).

Garanzia e supporto

I prodotti ORICO sono generalmente coperti dalla garanzia standard del produttore. Consultare la scheda di garanzia inclusa nella confezione o visitare il sito ufficiale ORICO. websito per termini e condizioni di garanzia specifici.

For technical support, troubleshooting assistance, or inquiries about your product, please contact ORICO customer service through their official website or the retailer where you purchased the product. Keep your purchase receipt and product model number (AP42F) handy when contacting support.

Risorse online:

© 2024 ORICO. Tutti i diritti riservati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.