Manuale utente dell'oscilloscopio tablet 4 in 1 FNIRSI DPOS350P

1. Introduzione e oltreview

The FNIRSI DPOS350P is a versatile 4-in-1 portable tablet instrument designed for various electronic testing and measurement applications. It integrates a 350 MHz bandwidth oscilloscope, a 200 KHz - 350 MHz spectrum analyzer, a 100 Hz - 50 MHz frequency response analyzer, and a 0 - 50 MHz DDS signal generator. This manual provides essential information for the safe and effective operation of your device.

Figura 1: Oltreview of the FNIRSI DPOS350P's integrated functions.

2. Impostazione

2.1 Carica iniziale

Before first use, fully charge the device's integrated 8000 mAh lithium polymer battery using the provided USB-C cable and a compatible power adapter. The charging indicator will show the charging status.

2.2 Accensione/spegnimento

Press and hold the power button located on the side of the device to turn it on or off. The device features an automatic power-off function, which can be configured in the system settings, to conserve battery life.

Figure 2: The FNIRSI DPOS350P highlighting its 7-inch IPS touchscreen and 8000mAh battery.

3. Modalità operative

The FNIRSI DPOS350P offers four primary operating modes, accessible via the touchscreen interface.

3.1 Funzione oscilloscopio

This mode provides a 2-channel digital oscilloscope with a 350 MHz bandwidth and a 1 GSa/s real-time sampling rate. Key features include:

• Larghezza di banda: 350 MHz
• Sample Tariffa: 1 GSa/s
• Profondità di memoria: 47 nodi
• Risoluzione: 8-16 bit, adjustable to improve signal clarity and detail.
• Frequenza di aggiornamento della forma d'onda: 50,000 WFM/s
• Canali: 2
• Display: 7-inch IPS touchscreen with digital phosphors.
• Modalità: X-Y mode for phase comparison.
• Sensibilità: Ultra-sensitive 2 mV/div.
• Misure: 12 automatic measurements and cursor functions.

Figure 3: Comparison of 8-bit and 16-bit resolution on the oscilloscope, demonstrating enhanced detail.

3.2 Spectrum Analyzer Function

The spectrum analyzer performs FFT-based analysis over a frequency range of 200 kHz to 350 MHz. It is suitable for EMI checks and signal integrity analysis.

• Gamma di frequenza: 200 kHz - 350 MHz
• FFT Length: Configurable from 400 kHz to 320 kHz.
• Caratteristiche: Harmonic markers, cursor readings, and real-time 2D/3D waterfall display.

Figure 4: Spectrum Analyzer interface with 2D and 3D waterfall displays for detailed frequency analysis.

3.3 Frequency Response Analyzer Function

This function allows for Bode plot analysis, ideal for testing the stability of loops, optimizing analog filters, and measuring gain/phase/frequency characteristics.

• Gamma di frequenza: 100 Hz - 50 MHz
• Amplitudine: da 0 a 5 Vpp
• Offset: da +2.5 V a -2.5 V
• Conteggio frequenza: Da 20 a 500
• Misure: Gain, phase, and frequency.

Figure 5: Frequency Response Analyzer displaying a Bode plot for circuit analysis.

3.4 DDS Signal Generator Function

Il generatore di segnale DDS integrato può generare varie forme d'onda a scopo di test e calibrazione.

• Forme d'onda: 14 standard waveforms and support for 500 custom clipped waveforms.
• Gamma di frequenza: da 0 a 50 MHz
• Risoluzione: Frequenza 1 Hz
• Amplitudine: da 0 a 5 Vpp
• Offset: da -2.5 V a +2.5 V
• Ciclo di lavoro: Regolabile dal 0.1% al 99.9%.

4. Smart Features and Portability

The DPOS350P is designed for both laboratory and field use, incorporating several intelligent features:

• Memorizzazione delle forme d'onda: Stores up to 500 waveforms.
• Schermate: Captures up to 90 screenshots.
• Visualizzazione FFT: Integrated Fast Fourier Transform display.
• Bandwidth Limiter: Hardware bandwidth limiter at 150 M/20 M.
• Spegnimento automatico: Configurable automatic shutdown to save battery.
• Batteria: 8000 mAh rechargeable battery for extended portable use.
• Ricarica: Porta di ricarica USB-C.
• Esportazione dati: Supports USB data export and software updates.

5. Manutenzione

5.1 Cura generale

Keep the device clean and dry. Avoid exposure to extreme temperatures, humidity, or direct sunlight. Use a soft, dry cloth for cleaning the exterior. Do not use abrasive cleaners or solvents.

5.2 Cura della batteria

To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, ensure the battery is charged to approximately 50-70% and recharge it every few months.

5.3 Aggiornamenti software

Controllare periodicamente le istruzioni del produttore website for available software updates to ensure optimal performance and access to new features. Updates can typically be performed via the USB data export port.

6. Risoluzione Dei Problemi

6.1 Il dispositivo non si accende

• Ensure the battery is sufficiently charged. Connect the device to a power source using the USB-C cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Verificare che il pulsante di accensione sia premuto correttamente.

6.2 Problemi di visualizzazione

• Se lo schermo non risponde, prova a riavviare il dispositivo.
• Adjust display brightness in the system settings.

6.3 Misurazioni imprecise

• Ensure probes are correctly connected and calibrated.
• Check measurement settings (e.g., voltage range, time base, resolution).
• Perform a self-calibration if available in the system menu.

For persistent issues, refer to the official FNIRSI support resources.

7. Specifiche

8. Garanzia e supporto

The FNIRSI DPOS350P comes with a standard manufacturer's warranty. For detailed warranty terms, technical support, or service inquiries, please refer to the official FNIRSI webo contattare il rivenditore autorizzato. Conservare la ricevuta d'acquisto come prova d'acquisto.