DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Informazioni sulla sicurezza

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Quando si utilizza questo prodotto, indossare sempre occhiali di sicurezza oppure occhiali di sicurezza con protezioni laterali e, se necessario, una visiera completa.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Prodotto finitoview

Contenuto della confezione

• Cordless Brad Chiodatrice
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• Batteria agli ioni di litio da 2.0 Ah
• Caricabatterie rapido da 1 ora
• Custodia per il trasporto
• Manuale di istruzioni

Componenti dello strumento

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Dimensioni e peso

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Lunghezza: 10.83 pollici (27.5 cm)
• Larghezza: 9.45 pollici (24 cm)
• Weight: 6.19 lbs (without battery)

3. Impostazione

Installazione della batteria

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Allineare la batteria con l'apposito alloggiamento sull'utensile.
3. Inserire la batteria nell'apposito alloggiamento finché non scatta in posizione.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Premere il pulsante di rilascio ed estrarre la copertina della rivista.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Chiudere il coperchio del caricatore finché non si aggancia al pulsante di rilascio.

Chiodo Viewehm Finestra

Il chiodo viewer window allows you to quickly check the fastener level. When the window shows rosso, it indicates the magazine is without nails. When it shows nero, it indicates the magazine contains nails.

4. Istruzioni per l'uso

Modalità di fuoco

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figura 4: Interruttore di selezione della modalità di fuoco.

Modalità di cottura singola

• Shift the mode switch to the lato sinistro (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Modalità di sparo a contatto

• Shift the mode switch to the lato destro (contact firing icon).
• Premi il grilletto.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Nota: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Regolazione della profondità

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

Illuminazione a LED

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

Indicatore LED

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Rosso acceso: Batteria scarica.
• Rosso lampeggiante: Nails/staples are jammed.
• Verde acceso: No nails/staples in the magazine.
• Verde lampeggiante: Surriscaldare.
• Luci spente: Stato di funzionamento normale.

Video ufficiale del prodotto

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Manutenzione

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Cura della batteria

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Conservare la batteria in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.

6. Risoluzione Dei Problemi

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Specifiche

Elementi di fissaggio compatibili

Figure 9: Compatible nail and staple types.

8. Garanzia e supporto

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.