Strymon PCH Stereo Active Direct Interface User Manual

Introduzione

The Strymon PCH is an advanced stereo active direct interface designed for musicians and audio professionals. It provides a transparent signal path for instruments like guitars, keyboards, and synthesizers, allowing direct connection to mixing consoles or recording interfaces. The PCH also features a studio-grade headphone amplifier for personal monitoring and silent practice.

This manual provides detailed instructions for setting up, operating, and maintaining your Strymon PCH to ensure optimal performance and longevity.

Caratteristiche principali

Advanced Direct Interface: Offers a transparent stereo active direct interface for various instruments.
Console-Quality Headphone Amplificatore: Cuffie integrate amp for detailed stereo monitoring or silent practice, capable of driving high-impedance headphones.
Virtually Unclippable Design: Internal power circuit boosts standard 9V DC to 24V for massive headroom.
Flexible Pro Outputs: Supports stereo or dual mono operation with stereo XLR outputs, switchable mic/line level, and ground lift. Stereo Thru outputs include a mono sum ability.
Costruzione robusta: Housed in a durable extruded aluminum chassis for silent operation and flat frequency response.

Impostare

Follow these steps to set up your Strymon PCH:

Collegamento elettrico: Connect a standard 9V DC power supply (center-negative) to the 9VDC input jack on the PCH. The unit will internally boost this to 24V for optimal performance.
Input dello strumento: Connect your instrument (guitar, synth, keyboard, etc.) to the IN (Left/Right) 1/4" input jacks. For mono instruments, use the Left IN jack.
Thru Outputs: Use the THRU (Left/Right) 1/4" jacks to send the input signal to other devices, such as an amplifier or pedalboard. The THRU outputs can be summed to mono using the 'sum stereo' switch if desired.
Uscite XLR: Connect the LEFT OUT and RIGHT OUT XLR jacks to your mixing console, audio interface, or PA system.
Collegamento cuffie: Plug your headphones into the PHONES 1/4" stereo jack for personal monitoring.

Strymon PCH front and back panel connections

Immagine: Oltreview of the Strymon PCH showing input, thru, headphone, and output connections.

Strymon PCH rear panel with input, thru, phones, and power

Image: Close-up of the PCH rear panel, highlighting the IN, THRU, PHONES, and 9VDC power connections.

Operazione

Understanding the controls of your PCH is essential for optimal sound routing and monitoring.

PHONES Volume Knob: Adjusts the output level for the connected headphones. Rotate clockwise to increase volume, counter-clockwise to decrease.
SUM (THRU) Switch: This switch affects the THRU outputs.
- Quando impostato su 'sum', the Left and Right input signals are summed to mono and sent to both THRU outputs.
- Quando impostato su 'stereo', the Left input goes to the Left THRU, and the Right input goes to the Right THRU.
LEVEL (XLR Outputs) Switch: Located near the XLR outputs, this switch selects the output level for the XLR connections.
- Impostato su 'mic' for connecting to microphone preamps or inputs expecting a mic-level signal.
- Impostato su 'line' for connecting to line-level inputs on mixers or audio interfaces.
GROUND (XLR Outputs) Lift Switch: This switch helps eliminate hum and noise caused by ground loops.
- Impostato su 'lift' to disconnect the ground connection between the PCH and the connected device via XLR.
- Impostato su 'gnd' (ground) for a standard ground connection. If you experience hum, try switching to 'lift'.

Strymon PCH XLR outputs with Level and Ground switches

Image: Close-up of the PCH XLR outputs, showing the LEVEL (mic/line) and GROUND (lift/gnd) switches.

Strymon PCH top view showing controls and connections

Immagine: in alto view of the Strymon PCH, illustrating the overall layout of controls and connections.

Manutenzione

The Strymon PCH is designed for durability and requires minimal maintenance.

Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno dell'unità. Evitare detergenti abrasivi o solventi.
Magazzinaggio: Store the PCH in a dry environment, away from extreme temperatures and direct sunlight.
Connessioni: Controllare periodicamente tutti i collegamenti dei cavi per verificarne la tenuta e l'assenza di segni di usura.
Alimentazione elettrica: Always use a compatible 9V DC (center-negative) power supply. Using an incorrect power supply can damage the unit.

Risoluzione dei problemi

If you encounter issues with your Strymon PCH, refer to the following common troubleshooting steps:

Problema	Possibile causa/soluzione
Nessuna uscita audio	Assicurarsi che l'alimentatore sia collegato correttamente e funzioni. Check all input and output cables for secure connections. Verify the PHONES volume knob is turned up. Confirm the LEVEL switch for XLR outputs is set appropriately (mic/line) for the receiving device.
Ronzio o rumore di ronzio	Engage the GROUND LIFT switch to 'lift'. Check for faulty cables or improper grounding in your audio chain. Ensure the power supply is not introducing noise.
Low Headphone Volume	Increase the PHONES volume knob. Ensure your headphones are properly connected and functioning. The PCH headphone amp is powerful, but extremely high-impedance headphones might require maximum volume.
Suono distorto	Reduce the input level from your instrument if it's excessively hot. Ensure the receiving device (mixer, interface) is not being overdriven. While the PCH is designed to be unclippable, extreme input levels can still cause issues further down the signal chain.

Specifiche

Caratteristica	Dettaglio
Numero di modello	PCH
Peso dell'articolo	1.2 libbre (0.54 kg)
Dimensioni del prodotto	4.88" x 2.97" x 1.94" (12.4 x 7.5 x 4.9 cm)
Tecnologia di connettività	XLR, TRS da 1/4"
Numero di canali	4 (Stereo In, Stereo Thru, Stereo Out)
Dispositivi compatibili	Guitar, Keyboard, Synthesizer, Pedalboards, Personal Computer, Portable Media Player, Speaker
Tipo di materiale	Alluminio estruso
Requisiti di potenza	9V DC (center-negative)
Volume Operativo Internotage	24V (internally boosted)

Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale Strymon webo contattare direttamente il servizio clienti. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Strymon Ufficiale Websito: www.strymon.net

Strymon PCH