Manuale utente della bici elettrica ACTBEST Race

1. Introduzione

Thank you for choosing the ACTBEST Race Electric Bike. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric bicycle. Please read this manual thoroughly before your first ride and keep it for future reference. Proper understanding and adherence to these instructions will ensure optimal performance and longevity of your e-bike.

2. Linee guida di sicurezza

La tua sicurezza è fondamentale. Indossa sempre il casco e l'equipaggiamento di sicurezza adeguato quando sei in sella. Informati sulle leggi e i regolamenti locali sul traffico in materia di biciclette elettriche. Esegui un'ispezione preliminare prima di ogni utilizzo.

• Utilizzo del casco: Indossare sempre un casco omologato.
• Codice della strada: Obey all local traffic laws, signs, and signals.
• Controllo pre-viaggio: Before each ride, check tire pressure, brake function, battery charge, and ensure all quick releases and fasteners are secure.
• Condizioni meteo: Prestare attenzione quando si guida sul bagnato, poiché la distanza di frenata potrebbe aumentare.
• Cavalcata notturna: Use headlights and taillights when riding in low-light conditions.
• Limite di peso: Non superare il peso massimo raccomandato di 330 libbre.
• Sicurezza della batteria: Only use the provided charger. Do not expose the battery to extreme temperatures or puncture it.

3. Contenuto della confezione

Dopo aver disimballato, verificare che siano presenti tutti gli elementi elencati di seguito:

• 1 x ACTBEST Race Electric Bike (partially assembled)
• 1 x Caricabatteria
• 1 x set di strumenti di installazione
• 1 x Manuale utente
• Batteria (preinstallata o separata)

4. Istruzioni di montaggio

The ACTBEST Race Electric Bike comes partially assembled. Follow these steps carefully for complete assembly. For a visual guide, please refer to the assembly video below.

4.1. Gruppo manubrio

1. Use the provided tools to loosen the screws on the stem.
2. Turn the stem to the correct riding position and securely tighten the screws.
3. Remove the front cover of the stem.
4. Carefully place the handlebar into position, ensuring all cables are free and not pinched.
5. Reattach the front cover and tighten the screws evenly to secure the handlebar.

4.2. Installazione della ruota anteriore

1. Remove the protective screw and plastic cap from the front fork.
2. Carefully lift the front of the bike and align the front wheel with the fork dropouts, ensuring the brake rotor slides into the brake caliper.
3. Insert the quick-release skewer through the wheel hub.
4. Tighten the quick release nut and close the lever firmly.

4.3. Headlights and Taillights Installation

1. Attach the headlight to the designated mounting point on the front fork using the provided bracket and tools.
2. Attach the taillight to the seat post or rear rack (if applicable) using its mounting mechanism.

4.4. Seat Post and Saddle Installation

1. Insert the seat post with the saddle attached into the frame's seat tube.
2. Adjust the seat height to a comfortable and safe riding position.
3. Secure the seat post by closing the quick-release lever firmly. Ensure the minimum insertion mark on the seat post is not visible.

4.5. Installazione del pedale

Note: Pedals are marked 'L' for left and 'R' for right. The right pedal tightens clockwise, and the left pedal tightens counter-clockwise.

1. Identify the 'R' pedal and thread it into the right crank arm (chain side) clockwise. Tighten with a wrench.
2. Identify the 'L' pedal and thread it into the left crank arm counter-clockwise. Tighten with a wrench.

4.6. Reflector Installation

1. Attach the front reflector to the front of the bike, typically on the handlebars or front fork.
2. Attach the rear reflector to the seat post or rear rack.
3. Attach wheel reflectors to the spokes of both wheels.

4.7. Installazione e attivazione della batteria

1. If the battery is separate, insert it into the frame's battery compartment.
2. Use the key to lock the battery securely in place.
3. Press the power button on the battery to activate it.

Descrizione dell'immagine: A fully assembled ACTBEST Race Electric Bike, white in color, showcasing its mountain bike design with front suspension, disc brakes, and integrated battery.

5. Istruzioni per l'uso

5.1. Accensione/spegnimento e visualizzazione

1. Ensure the battery is locked and powered on.
2. Press and hold the power button on the handlebar display to turn on the e-bike system.
3. The display will show speed, battery level, assist level, and other ride data.
4. Per spegnere, tenere nuovamente premuto il pulsante di accensione sul display.

5.2. Modalità di guida

Your ACTBEST Race Electric Bike offers multiple riding modes for a customizable experience:

• Modalità di pedalata assistita (PAS): Provides electric assistance as you pedal. Adjust the assist level (1-5) using the '+' and '-' buttons on the display. Higher levels provide more assistance.
• Modalità solo acceleratore: Engages the motor without pedaling. Use the thumb throttle to control speed.
• Modalità manuale: Si può pedalare come una bicicletta tradizionale, senza alcuna assistenza elettrica.
• Modalità camminata: Provides low-speed assistance (typically up to 6 km/h) to help push the bike while walking. Activate via the display.

Descrizione dell'immagine: An illustrative image depicting the three primary riding modes: Pedal Assist, Manual, and Throttle-only, with a cyclist riding an e-bike on varied terrain.

5.3. Cambio marcia

The bike is equipped with a Shimano 21-speed gear system. Use the shifters on the handlebars to change gears according to terrain and desired effort. Shift smoothly to avoid strain on the drivetrain.

5.4. Sistema frenante

The ACTBEST Race features dual disc brakes for reliable stopping power. Apply both front and rear brakes simultaneously for effective and controlled deceleration. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.

Descrizione dell'immagine: Un dettagliato view of the 27.5-inch wider tire and disc brake system, emphasizing its design for stability, traction, comfort, and shock absorption.

6. Manutenzione

Una manutenzione regolare è fondamentale per le prestazioni e la sicurezza della tua e-bike.

• Cura della batteria: Charge the battery regularly, even when not in use, to maintain its health. Store in a cool, dry place. Avoid fully discharging the battery.
• Pressione degli pneumatici: Check tire pressure before each ride. Maintain pressure within the range indicated on the tire sidewall.
• Ispezione dei freni: Controllare regolarmente l'usura delle pastiglie dei freni e assicurarsi che le leve dei freni siano reattive. Regolare o sostituire se necessario.
• Lubrificazione della catena: Mantenere la catena pulita e lubrificata per garantire cambi di marcia fluidi e prevenirne l'usura.
• Elementi di fissaggio: Controllare periodicamente che tutti i bulloni, i dadi e gli sganci rapidi siano ben serrati.
• Pulizia: Pulisci la tua e-bike con l'adamp panno. Evitare il lavaggio ad alta pressione direttamente sui componenti elettrici.

7. Risoluzione Dei Problemi

This section addresses common issues you might encounter with your ACTBEST Race Electric Bike.

If you encounter issues not listed here or cannot resolve a problem, please contact ACTBEST customer support.

8. Specifiche

Key technical specifications for the ACTBEST Race Electric Bike:

Descrizione dell'immagine: Un lato profile of the ACTBEST Race Electric Bike with key dimensions labeled, including overall length, height, seat height, handlebar width, suggested rider height range, and maximum load capacity.

9. Garanzia e supporto

The ACTBEST Race Electric Bike comes with a limited warranty. For specific warranty details, registration, or to obtain technical support, please refer to the warranty card included with your purchase or visit the official ACTBEST website. For any inquiries, contact ACTBEST customer service.