Mould King 10166 Tech Oldtimer Sports Car Building Kit Instruction Manual

1. Introduzione

This manual provides detailed instructions for assembling and understanding the features of your Mould King 10166 Tech Oldtimer Sports Car Building Kit. This kit allows you to construct a detailed vintage racing car model using 1147 interlocking building blocks. Please read all instructions carefully before beginning assembly.

Image 1.1: The fully assembled Mould King 10166 Tech Oldtimer Sports Car model.

2. Informazioni sulla sicurezza

• Rischio di soffocamento: Questo kit contiene piccole parti e non è adatto a bambini di età inferiore a 3 anni.
• Età consigliata: Adatto a partire dai 8 anni. Per i costruttori più piccoli si raccomanda la supervisione di un adulto.
• Tenere tutti i materiali di imballaggio fuori dalla portata dei bambini per evitare il soffocamento.
• Do not ingest any building block pieces.

3. Contenuto della confezione

Dopo aver aperto la confezione, assicurarsi che siano presenti tutti i componenti:

• 1147 x Building Block Pieces (sorted into numbered bags)
• 1 x Manuale di istruzioni

Se qualche pezzo risulta mancante o danneggiato, consultare la sezione "Garanzia e assistenza" per ricevere assistenza.

4. Istruzioni per l'installazione e il montaggio

Follow these steps to assemble your Mould King Tech Oldtimer Sports Car:

1. Preparazione: Clear a spacious, well-lit work area. Open the building block bags one by one, following the numbered sequence indicated in the instruction manual. The blocks are packed in independent, numbered bags to simplify the assembly process.
2. Segui il Manuale: Refer to the included instruction manual. Each step is clearly numbered and illustrated, making the assembly process straightforward.
3. Identificazione del pezzo: Carefully identify the correct pieces for each step. The manual provides visual guides for piece recognition.
4. Interblocco: Ensure each block is firmly interlocked with the previous one to create a stable structure.
5. La pazienza è la chiave: Take your time with each step. Building this model promotes practical skills, creativity, and imagination.

The instruction manual is designed to be easy to follow, even for those new to building block kits.

5. Funzionamento e caratteristiche

Once assembled, your Mould King Tech Oldtimer Sports Car model features several interactive and detailed elements:

• Detailed Body Design: Observe the streamlined body, distinctive grille, and replicated headlights.
• Apertura delle porte: The car doors can be opened to reveal a detailed cockpit.
• Interni della cabina di pilotaggio: Inside the cockpit, you will find a dashboard, steering wheel, and seats.
• Apertura del cofano: The bonnet (hood) can be opened to display a highly realistic engine model with intricate details.
• Opening Boot: The boot (trunk) can also be opened, providing additional display space.
• Compatibilità: This building set is compatible with most mainstream brick brands, allowing for creative expansion and customization.

Image 5.1: Detailed features including the opening bonnet, cockpit, grille, and boot.

6. Manutenzione

To ensure the longevity and appearance of your model, follow these maintenance guidelines:

• Pulizia: Pulire delicatamente il modello con un panno morbido e leggermenteamp panno per rimuovere la polvere. Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi.
• Magazzinaggio: Conservare il modello in un luogo fresco e asciutto, lontano dalla luce solare diretta, per evitare scolorimenti o deterioramenti del materiale.
• Gestione: Maneggiare il modello con cura per evitare smontaggi accidentali o danni alle parti delicate.

7. Risoluzione Dei Problemi

Se riscontri problemi durante l'assemblaggio o con il modello completato, tieni presente quanto segue:

• Pezzi mancanti: Double-check all bags and the work area. If a piece is genuinely missing, refer to the "Warranty and Support" section for contact information.
• Difficoltà di montaggio: Review the instruction manual for the specific step. Ensure you are using the correct pieces and that they are oriented correctly. Sometimes, a firm press is needed to interlock blocks.
• Collegamenti allentati: Se i componenti sembrano allentati, assicurarsi che siano ben premuti insieme. Smontare e rimontare la sezione se necessario.

8. Specifiche

Image 8.1: Product dimensions of the assembled model.

9. Garanzia e supporto

Mould King products are manufactured to high-quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship.

For warranty claims, missing parts, or technical support, please contact Mould King customer service through their official website or the retailer from whom the product was purchased. Please have your model number (WX10166-LYF) and proof of purchase ready.