Introduzione
Thank you for choosing the IROK Mars75 Wired Magnetic Switch Keyboard. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new keyboard. Please read these instructions carefully to ensure optimal performance and longevity of your device.
Immagine: Oltreview of the IROK Mars75 Wired Magnetic Switch Keyboard.
Impostare
Follow these steps to set up your IROK Mars75 keyboard:
- Disimballaggio: Carefully remove the keyboard, USB-C cable, and keycap puller from the packaging.
- Connessione: Connect the provided USB-C cable to the keyboard's USB-C port and the other end to an available USB port on your computer (Laptop, PC).
- Installazione del driver: For full functionality and customization, download and install the proprietary Web Driver or One-stop HUB Driver from the official IROK websito: www.irok.cc. This software allows for advanced settings, including key remapping, lighting customization, and magnetic switch calibration.
- Utilizzo iniziale: The keyboard is plug-and-play for basic typing. Once the driver is installed, you can begin customizing your experience.
Image: Screenshot of the IROK Web Driver interface, showing key settings and customization options.
Istruzioni per l'uso
The IROK Mars75 keyboard features advanced technology for enhanced performance:
- Layout compatto al 75%: This layout integrates essential keys in a smaller footprint, optimizing desktop space while retaining most functionality.
- Hall Effect & Gasket Structure: The keyboard combines magnetic sensing Hall Effect switches for rapid, wear-free actuation and customizable travel distances with a Gasket Mount structure. This design suspends the PCB in cushioning material, providing a soft, consistent typing feel and reducing noise.
Immagine: Esploso view diagram showing the Gasket Structure components, including ABS side-engraved keycaps, purple magnetic switches, sound-absorbing cotton, voice actor protective film, PCB, aluminum alloy positioning plate, PU foam, silicone base pad, and base cover.
- Advanced Magnetic Switches: Equipped with the First-generation GTURBO magnetic axis algorithm and a high-speed flagship MCU, the keyboard offers a 256KHz single key scan rate, 8KHz polling rate, and latency as low as 0.08ms. This ensures precise and rapid response for gaming and typing.
Immagine: Primo piano view of the 480MHz Main Control Chip, highlighting its role in enhanced accuracy and stability.
- 0.001MM RT Accuracy: The Rapid Trigger feature allows for instant key actuation and reset, providing a competitive edge in fast-paced applications.
- MIX Function for All-key Magnetic Switches: Switches and keycaps can be freely replaced without soldering, allowing for personalized typing feel and sound.
- Customizable ARGB Lighting: The keyboard features independent IC 500Hz high refresh rate ARGB lighting, offering rich color customization options through the proprietary driver.
Video: A demonstration of the IROK Mars75 Keyboard's customizable RGB lighting effects and clear keycaps.
Manutenzione
Una corretta manutenzione garantisce la longevità e le prestazioni della tastiera:
- Pulizia: Regularly clean the keyboard with a soft, dry cloth. For deeper cleaning, use a keycap puller to remove keycaps and gently brush away dust and debris. Avoid using harsh chemicals or abrasive materials.
- Keycap and Switch Replacement: Utilize the included keycap puller to safely remove keycaps. Due to the hot-swappable design, magnetic switches can be replaced without soldering. Ensure proper alignment when reinserting switches and keycaps.
- Cura del cavo: Evitare di piegare bruscamente o tirare eccessivamente il cavo USB-C per evitare danni.
Risoluzione dei problemi
If you encounter issues with your IROK Mars75 keyboard, refer to the following common solutions:
| Problema | Soluzione |
|---|---|
| La tastiera non risponde | Assicurati che il cavo USB-C sia collegato saldamente sia alla tastiera che al computer. Prova una porta USB o un cavo diverso. |
| Illuminazione RGB non funzionante o errata | Verify that the IROK proprietary driver is installed and updated. Check lighting settings within the software. Ensure no physical damage to the LEDs. |
| Keys not actuating correctly or inconsistent response | Open the IROK proprietary driver and perform a magnetic switch calibration. Ensure switches are properly seated. If a specific switch is faulty, it can be replaced due to the hot-swappable design. |
| Il software non rileva la tastiera | Restart your computer and keyboard. Reinstall the IROK proprietary driver from www.irok.cc. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | IROK |
| Modello | Mars75 |
| Disposizione | 75% (84 tasti) |
| Connettività | Cablato (USB-C) |
| Tipo di interruttore | Magnetico (effetto Hall) |
| Tasso di sondaggio | 8KHz |
| Single Key Scan Rate | 256KHz |
| Latenza | Fino a 0.08 ms |
| Precisione RT | 0.001MM |
| Illuminazione | Customizable ARGB (500Hz Refresh Rate) |
| Struttura | Guarnizione di montaggio |
| keycaps | ABS Side-engraved |
| Materiale | Metallo, Plastica |
| Dimensioni (L x P x A) | 12.8" x 5.3" x 1.7" |
| Peso | 0.95 chilogrammi |
| Componenti inclusi | Keycap Puller, USB Cable, User Manual |
| Dispositivi compatibili | Computer portatile, PC |
Informazioni sulla garanzia
The IROK Mars75 Wired Magnetic Switch Keyboard comes with a garanzia di un anno from the date of purchase. This warranty covers manufacturing defects and workmanship. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Supporto
For further assistance, driver downloads, or frequently asked questions, please visit the official IROK websito:
You may also refer to the included user manual for additional details not covered in this document.