Jhoinrch RH-02 Pro Isolation USB to CAN FD Adapter User Manual

1. Introduzione

The Jhoinrch RH-02 Pro is an advanced Isolation USB to CAN FD Adapter designed for reliable CAN bus monitoring and data processing. This device features dual signal and power isolation, supporting both CAN FD and Classical CAN protocols with communication speeds up to 5 Mbps. It is equipped with multiple protection circuits, making it suitable for various industrial applications.

Figure 1: Product Explanation Diagram. This diagram illustrates how the RH-02 Pro collects data from a CAN bus to a PC via USB for transceiver control and data analysis.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• 1x Jhoinrch RH-02 Pro Isolation USB to CAN FD Adapter
• 1x cavo USB di tipo C
• 1x 3.81 Terminal Block
• 1x Cacciavite

Figure 2: Contents of the product package, including the adapter, USB-C cable, terminal block, and screwdriver.

3. Prodotto finitoview e interfaccia

The RH-02 Pro features several indicators and switches for operation and configuration:

• Indicatore PWR: A yellow LED that illuminates when the device is connected to a USB port, indicating power.
• STATE & WORK Indicators: These LEDs provide feedback based on the specific firmware function and operational status.
• Boot Switch: This switch controls the device's mode. Flipping it up sets the device to working mode. Flipping it giù activates DFU (Device Firmware Upgrade) mode, allowing for firmware updates.
• 120Ω Resistor Switch: This switch enables or disables the 120Ω termination resistor. Flipping it up turns the resistor off, and flipping it giù turns it on.
• CAN H, GND, CAN L, 5V Terminals: These are the connection points for the CAN bus (CAN H, CAN L, GND) and an optional 5V power output.
• Porta USB di tipo C: Used for connecting the adapter to a computer for power and data communication.

Figura 3: dettagliata view of the RH-02 Pro interface, highlighting indicators, switches, and connection terminals.

4. Specifiche

Figure 4: Physical dimensions of the Jhoinrch RH-02 Pro adapter.

5. Compatibilità

The Jhoinrch RH-02 Pro adapter offers broad compatibility with various operating systems and embedded platforms:

• Sistemi operativi: Compatible with Windows XP, 7, 8, 10, 11, and Linux operating systems.
• Embedded Platforms: Compatible with ARM-based embedded platforms such as Raspberry Pi, Raspberry Pi Zero, ODROID, and BeagleBone, making it suitable for integration into OEM products.
• Nota: MAC M series processors are not temporarily supported. There is no firmware supporting M series processing in the Canable program at this time.

Figure 5: Visual representation of the operating systems and platforms compatible with the RH-02 Pro.

6. Configurazione e connessione iniziale

Follow these steps to set up your Jhoinrch RH-02 Pro adapter:

1. Connessione al computer: Use the provided USB Type-C cable to connect the RH-02 Pro to an available USB port on your computer. The PWR indicator should illuminate yellow.
2. Installazione del driver: The device comes pre-installed with default Slcan firmware from the Canable project. Depending on your operating system, drivers may be automatically installed. If not, refer to the Canable project's GitHub page for driver installation instructions.
3. Collegamento CAN Bus: Connect your CAN bus network to the CAN H, CAN L, and GND terminals on the adapter. Ensure correct polarity.
4. 120Ω Termination: If your CAN bus network requires termination, ensure the 120Ω Resistor Switch is in the 'on' (down) position. If the network already has termination, set the switch to 'off' (up).
5. Configurazione software: Open your preferred CAN bus analysis software (e.g., Cangaroo, SavvyCAN, BUSMASTER, PCAN, SLCAN). Configure the software to recognize the RH-02 Pro as an Slcan device.

Figure 6: The RH-02 Pro adapter connected to a laptop via USB-C.

7. Modalità operative

The RH-02 Pro supports four distinct CAN bus working modes:

1. Modalità normale: In this mode, the node can send and receive data normally, actively participating in bus communication. It handles sending data, answering, error detection, and recovery. This is suitable for common communication scenarios.
2. Modalità silenziosa: The node only receives data and does not actively transmit to avoid interfering with the bus due to its own faults. This mode is ideal for debugging or isolating fault nodes without affecting bus operation.
3. Modalità loopback: This mode enables internal loopback data transmission, where the sent signal is directly fed back to its own receiver. It does not interact with the actual bus. This is useful for hardware self-testing or firmware debugging.
4. Listen-Only Mode: The node passively listens to the bus and does not send data or error frames. This prevents any interference with the network. It is typically used for network monitoring or learning bus parameters (e.g., baud rate detection).

Figure 7: Analysis of the four CAN bus working modes supported by the RH-02 Pro.

8. Firmware Update (DFU Mode)

The RH-02 Pro allows for firmware updates to expand functionality or address specific needs.

• Work Mode (Default): When the Boot Switch is in the SPENTO (up) position, the device operates with its factory-built-in Candlelight firmware, offering plug-and-play functionality.
• DFU Mode (Firmware Update): To update the firmware, set the Boot Switch to the ON (down) position. This puts the device into DFU mode. You can then use DfuSeDemo software to flash new firmware. More feature-rich firmware and detailed instructions can be found on the Canable project's GitHub page or canable.io.

Figure 8: Illustration of the Boot Switch positions for Work Mode and DFU Mode, along with corresponding device recognition in a computer's device manager.

9. Manutenzione

To ensure the longevity and optimal performance of your Jhoinrch RH-02 Pro adapter, follow these maintenance guidelines:

• Mantenere pulito: Pulire regolarmente il dispositivo con un panno morbido e asciutto. Evitare l'uso di detergenti liquidi o solventi.
• Proteggi le connessioni: Ensure USB and terminal connections are free from dust and debris.
• Magazzinaggio: Quando non viene utilizzato, conservare l'adattatore in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Maneggiare con cura: Evitare di far cadere o sottoporre il dispositivo a forti impatti.

10. Risoluzione Dei Problemi

If you encounter issues with your RH-02 Pro, refer to the following common troubleshooting steps:

• Dispositivo non riconosciuto:
  • Ensure the USB Type-C cable is securely connected to both the adapter and your computer.
  • Check if the PWR indicator is illuminated. If not, try a different USB port or cable.
  • Verify that the necessary drivers are installed. Refer to the Canable project's documentation for driver installation.
• No CAN Data Transmission/Reception:
  • Confirm that the CAN H, CAN L, and GND connections to your CAN bus are correct and secure.
  • Check the 120Ω Resistor Switch position. Ensure it is set appropriately for your CAN network's termination requirements.
  • Verify the operating mode (Normal, Silent, Loopback, Listen-Only) is correctly configured in your software and matches your intended use.
  • Ensure the baud rate configured in your software matches the baud rate of the CAN bus.
• Errore di aggiornamento del firmware:
  • Make sure the Boot Switch is in the ON (down) position to enter DFU mode before attempting a firmware update.
  • Ensure you are using the correct DfuSeDemo software and the appropriate firmware file.
  • Consult the Canable project's GitHub page for detailed firmware update procedures.

11. Garanzia e supporto

Jhoinrch is committed to providing high-quality products and excellent customer service.

• Garanzia: We offer a one-year product replacement warranty from the date of purchase.
• Supporto tecnico: Jhoinrch provides lifetime technical support for this Isolation USB to CAN FD adapter.
• Informazioni sui contatti: If you encounter any technical problems or have questions, please contact us via the following channels:
• E-mail di supporto: Jhoinrch@outlook.com
• Sales E-Mail: Jhoinrch@outlook.com
• Web Sito: https://jhoinrch.net/