Shutao 4-Channel 18650 Battery Capacity Tester User Manual

1. Prodotto finitoview

The Shutao 4-Channel 18650 Battery Capacity Tester is designed for comprehensive analysis of 18650 lithium batteries. It features four independent channels, allowing simultaneous charging, discharging, and capacity testing. This device also includes internal resistance measurement and automatic cycling functions to optimize battery performance and assess health.

Figura 1: Sopraview of the Shutao 4-Channel 18650 Battery Capacity Tester. This image shows the device from an angled perspective, highlighting the four battery slots, the central cooling fan, and the display screen.

2. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• 1 x 18650 Lithium Battery Capacity Tester Module

3. Identificazione dei componenti

Familiarize yourself with the various components and interfaces of the tester.

Figura 2: Labeled diagram of the tester's components. This image provides a top-down view of the device with numbered labels pointing to specific parts for easy identification.

1. Type-C 5V Power Supply Interface (Input 1)
2. Type-C 5V Power Supply Interface (Input 2)
3. Channel 1 Battery Holder
4. Channel 2 Battery Holder
5. Channel 3 Battery Holder
6. Channel 4 Battery Holder
7. Channel 1 External Terminal
8. Channel 2 External Terminal
9. Channel 3 External Terminal
10. Channel 4 External Terminal
11. Ventola del radiatore
12. Monitor Display
13. Menu /M Key
14. Adjust /S Key
15. Start/Stop /R/S Button
16. Channel /CHN Key
17. CHN1/1 Channel Status Indicator
18. CHN2/2 Channel Status Indicator
19. CHN3/3 Channel Status Indicator
20. CHN4/4 Channel Status Indicator

The display provides real-time information during operation:

Figura 3: Display interface explanation. This image shows a close-up of the tester's screen, with numbered labels indicating what each displayed value represents.

1. Vol. in tempo realetage
2. Corrente in tempo reale
3. Cumulative Capacity (mAh)
4. Accumulated Energy (mWh)
5. Battery Internal Resistance (mR)
6. Cumulative Running Time
7. Indicazione del canale
8. Status Indicator (e.g., STA:STOP)
9. Mode Menu (e.g., MODE:AUTO)
10. Arresto Scarica Voltage
11. Cycles (LOOP)

4. Impostazione

1. Collegamento elettrico: Connect the tester to a 5V DC power source using one of the two Type-C interfaces. An adapter and cable are typically included.
2. Inserimento della batteria: Insert flat-top 18650 batteries into the designated battery holders (3, 4, 5, 6). Ensure correct polarity (+ and -). The tester supports flat-top 18650 batteries.
3. Stabilizzazione: After installing a battery, allow a few seconds for the voltage and internal resistance readings on the display to stabilize before proceeding with tests.

5. Istruzioni per l'uso

The tester allows for independent operation of its four channels.

Figura 4: Display and control buttons. This image provides a detailed view of the tester's screen and the four control buttons located below it, used for navigation and operation.

5.1. Basic Navigation and Channel Selection

• Utilizzare il Channel /CHN Key (16) to switch between the four independent channels (CHN 1 to CHN 4).
• IL Menu /M Key (13) is used to enter or exit menu settings.
• IL Adjust /S Key (14) is used to change values or select options within a menu.
• IL Start/Stop /R/S Button (15) initiates or terminates a test cycle.

5.2. Automatic Charge and Discharge Cycles

The tester supports fully automatic charging and discharging cycles (1-9 cycles adjustable in auto mode).

1. Selezionare il canale desiderato utilizzando il Channel /CHN Key.
2. Premere il tasto Menu /M Key per accedere alla selezione della modalità.
3. Utilizzare il Adjust /S Key to select 'AUTO' mode.
4. Adjust the number of cycles (LOOP: 1-9) using the Adjust /S Key se necessario.
5. Premere il tasto Start/Stop /R/S Button to begin the automatic cycle. The charging process automatically stops when the battery is full.

5.3. Internal Resistance Measurement

The device utilizes the DC two-wire method to provide reference internal resistance values.

• For the most accurate reading, measure internal resistance when the battery is fully charged.
• The internal resistance value is displayed as 'mR' on the screen (5).

5.4. Setting Stop Discharge Voltage

You can choose from 11 stop-discharge voltage levels (2.5V to 3.5V).

1. Seleziona il canale desiderato.
2. Enter the menu using the Menu /M Key.
3. Navigate to the 'STOP' voltage impostazione.
4. Utilizzare il Adjust /S Key to select the desired stop discharge voltage (2.5V, 2.6V, ..., 3.5V).
5. Confermare l'impostazione e uscire dal menu.

5.5. Note importanti sull'utilizzo

• Discharge current is fixed at a maximum of approximately 1A (non-adjustable, non-constant current).
• Volume di caricatage is fixed at 4.2V.
• This tester is non compatibile with LiFePO4 batteries.

6. Informazioni sulla sicurezza

The device incorporates several safety features to ensure safe operation:

• Protezione contro il surriscaldamento: The integrated radiator fan (11) and internal sensors help prevent the device from overheating during operation.
• Spegnimento automatico: Settings are automatically saved in case of power loss.
• Charge Cutoff: Automatic charge cutoff prevents overcharging of batteries.
• Arresto scarico: Configurable stop discharge voltage prevents over-discharging.

Always ensure correct battery polarity when inserting batteries to prevent damage to the device or batteries.

7. Manutenzione

• Mantenere il dispositivo pulito e privo di polvere. Utilizzare un panno morbido e asciutto per la pulizia.
• Avoid exposing the tester to moisture or extreme temperatures.
• Ensure the cooling fan (11) is not obstructed to maintain proper airflow.
• Conservare il dispositivo in un luogo fresco e asciutto quando non viene utilizzato.

8. Risoluzione Dei Problemi

• Internal Resistance Readings Appear High at Low Voltages: If internal resistance readings seem unusually high, reinstall the battery. This can often provide a more accurate measurement.
• Il dispositivo non si accende: Ensure the Type-C power cable is securely connected to a functional 5V DC power source. Try a different cable or adapter if necessary.
• Batteria non rilevata: Verify that the battery is correctly inserted with the correct polarity and that it is a compatible 18650 flat-top lithium battery.

9. Specifiche

Figura 5: Device dimensions. This image shows the length and width of the tester, indicating measurements of 147mm (5.78 inches) and 102mm (4.00 inches).

10. Garanzia e supporto

For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Specific warranty details are not provided in this manual.