WILAWELS D12LT06-W01SLP1006

WILAWELS 300W Low Voltage Landscape Transformer and 10-Pack 6W LED Landscape Lights User Manual

1. Introduzione

Thank you for choosing the WILAWELS 300W Low Voltage Landscape Transformer and 10-Pack 6W LED Landscape Lights. This manual provides essential information for the safe installation, operation, and maintenance of your landscape lighting system. Please read these instructions thoroughly before installation and retain them for future reference.

2. Istruzioni di sicurezza

  • Sicurezza elettrica: Always disconnect power at the main circuit breaker before installing or servicing the transformer or lights.
  • Solo per uso esterno: The transformer and lights are designed for outdoor use. The transformer's power cord and sensor cord are ETL-certified for outdoor installation.
  • Voltage Compatibilità: The transformer converts 120V AC input to 12V/14V AC output. Ensure your landscape lights are compatible with this low voltage.
  • Cablaggio: Usa solo bassi volumitage landscape wiring suitable for outdoor burial or placement. Do not exceed the transformer's 300W capacity.
  • Esposizione all'acqua: Ensure all connections are secure and waterproof. Avoid submerging the transformer or lights in water.
  • Protezione circuiti: The transformer includes built-in circuit protection. If an issue occurs, the transformer will automatically disconnect power. Reset the circuit breaker after troubleshooting.

3. Contenuto della confezione

  • 1 x WILAWELS 300W Low Voltage Trasformatore di paesaggi
  • 10 x WILAWELS 6W 700LM Low Voltage LED Landscape Lights
  • 1 x Detachable Photocell Sensor (pre-attached to transformer)
  • Manuale d'uso

4. Prodotto finitoview

4.1. 300W Low Voltage Trasformatore di paesaggi

The WILAWELS 300W Low Voltage Landscape Transformer safely converts standard 120V AC household current to a low 12V/14V AC output, suitable for outdoor LED and halogen landscape lighting. It features a digital display, multiple operating modes, a detachable photocell sensor for dusk-to-dawn operation, and built-in circuit protection.

WILAWELS 300W Low Voltage Landscape Transformer with digital display and controls

Figure 1: WILAWELS 300W Low Voltage Landscape Transformer. Shows the front panel with digital clock, mode indicators, and control buttons (MENU, CLOCK, UP/DOWN arrows, ENTER).

300 W a basso volumetage Transformer showing 120V AC input and 12V/14V AC output

Figure 2: Transformer voltage conversion. Illustrates the 120V AC input and the 12V/14V AC low voltage uscita.

4.2. 6W LED Landscape Lights

The included 6W LED landscape lights are designed for pathway, spot, deck, and string lighting applications. They feature a durable aluminum lamp head, high-quality LED COB chip, and offer adjustable rotation for precise illumination. These lights are IP65 waterproof and built to withstand various outdoor conditions.

10-Pack 6W 700LM Low Voltage Landscape Lighting Bundle

Figure 3: The 10-pack of 6W LED landscape lights, each with a ground stake and wiring.

Dettagliato view of LED landscape light component with dimensions and rotation capabilities

Figura 4: dettagliata view of a single LED landscape light, showing its dimensions (10.5cm/4.1" lamp head, 6cm/2.4" depth, 23cm/9" total height, 15.5cm/6.1" stake) and adjustable rotation (270° vertical, 360° horizontal).

5. Installazione

5.1. Transformer Placement

  • Mount the transformer in a suitable outdoor location, ensuring it is protected from direct heavy rain and snow, and is easily accessible.
  • The transformer must be installed vertically with the output terminals facing downwards.
  • Ensure the 3.3ft power cord can reach a grounded 120V AC outdoor outlet.
  • The 6ft photocell sensor cord allows for flexible placement of the sensor to optimize dusk-to-dawn detection.

5.2. Connecting Landscape Lights

Follow these steps to connect your low-voltage landscape lights to the transformer using appropriate low-voltage wiring (not included).

  1. Preparare i cavi: Separate the two conductors of the low-voltage wire approximately 1 inch at the connection point.
  2. Install First Tap: Insert one conductor into the screw pin connector on the light fixture.
  3. Screw Pin into Power Cable: Securely screw the pin into the main low-voltage power cable, ensuring good contact.
  4. Install End Tap: Insert the second conductor into the other screw pin connector on the light fixture.
  5. Tighten Screw Collar: Tighten the screw collar to secure both conductors and ensure a waterproof seal.
  6. Test di trazione: Gently pull on the wires to confirm they are securely connected.
Step-by-step wiring instructions for connecting low-voltage landscape lights

Figure 5: Visual guide for connecting low-voltage wires to the landscape lights. Steps include separating wires, installing screw pins, and tightening the collar.

Nota importante: Basso volumetage wires and additional connectors are not included with this bundle and must be purchased separately.

6. Funzionamento

6.1. Impostazione dell'orologio

  1. Premere il tasto OROLOGIO pulsante. Le cifre dell'ora lampeggeranno.
  2. Utilizzare il SU/GIÙ frecce per impostare l'ora corrente.
  3. Premere OROLOGIO di nuovo. Le cifre dei minuti lampeggeranno.
  4. Utilizzare il SU/GIÙ arrows to set the current minute.
  5. Premere OROLOGIO to confirm and exit clock setting.

6.2. Modalità operative

The transformer offers six operating modes to suit various lighting needs. Press the MENU pulsante per scorrere le modalità.

Diagram illustrating the six operating modes of the WILAWELS 300W Low Voltage Trasformatore

Figura 6: Oltreview of the six available operating modes: Manual On/Off, Auto On/Off, Timer Mode, Countdown Mode, Dusk On Timer Off, and Test Mode.

  • OFF: Lights remain off.
  • SOPRA: Le luci rimangono accese ininterrottamente.
  • AUTO (Dusk to Dawn): The photocell sensor automatically turns lights on at dusk and off at dawn.
    • Illustration of the Dusk-to-Dawn photocell sensor functionality

    Figure 7: The photocell sensor automatically activates lights at dusk and deactivates them at dawn, demonstrating the AUTO mode.

  • COUNTDOWN (2H/4H/6H/8H): Lights turn on at dusk and stay on for a set duration (2, 4, 6, or 8 hours). Use the SU/GIÙ arrows to select the duration.
  • TIMER: Allows setting specific ON and OFF times. Press ENTRARE to set the ON time, then ENTRARE again to set the OFF time. Use SU/GIÙ arrows to adjust hours and minutes.
  • DUSK ON TIMER OFF: Lights turn on at dusk and turn off at a specific set time. Press ENTRARE to set the OFF time. Use SU/GIÙ arrows to adjust hours and minutes.
  • TEST: Activates the lights for a short period (e.g., 1 minute) to verify connections and functionality.

6.3. Funzione di memoria

The transformer features a memory function that retains your last selected settings even after a power outage, simplifying power restoration.

7. Manutenzione

  • Pulizia: Periodically wipe the transformer and light fixtures with a soft, damp panno per rimuovere sporco e detriti. Non utilizzare detergenti abrasivi o solventi.
  • Sensore fotocellula: Ensure the photocell sensor is clean and unobstructed for accurate dusk-to-dawn operation.
  • Ispezione del cablaggio: Regularly inspect all wiring for damage, fraying, or loose connections. Repair or replace damaged wiring immediately.
  • Light Fixture Adjustment: Adjust the angle of the landscape lights as needed to achieve desired illumination.

8. Risoluzione Dei Problemi

  • Le luci non si accendono:
    • Check if the transformer is plugged into a working outlet.
    • Verify the selected operating mode (e.g., not in OFF mode).
    • Controllare che tutti i collegamenti dei cavi non siano allentati o danneggiati.
    • Ensure the photocell sensor is clean and not obstructed if using AUTO or COUNTDOWN modes.
    • Check for tripped circuit protection on the transformer. Reset if necessary.
  • Circuit Protection Tripped: If the transformer automatically disconnects, it indicates an overload or short circuit. Disconnect all lights, reset the circuit breaker on the transformer, and reconnect lights one by one to identify the faulty fixture or wiring section.
  • Inaccurate Dusk-to-Dawn Operation: Ensure the photocell sensor is not covered, dirty, or exposed to artificial light sources (e.g., porch lights) that might interfere with its detection of natural light levels.

9. Specifiche

9.1. 300W Low Voltage Trasformatore di paesaggi

  • Modello: D12LT06-W01SLP1006 (part of bundle)
  • Ingresso volumetage: 120 V CA
  • Volume di uscitatage: 12 V/14 V CA
  • Max Wattage: 300W
  • Certificazioni: Certificato ETL
  • Lunghezza del cavo di alimentazione: 3.3 piedi
  • Photocell Sensor Cord Length: 6 piedi
  • Caratteristiche: Photocell Sensor, 6 Operating Modes, Circuit Protection, Memory Function

9.2. 6W LED Landscape Lights

  • Cosatage: 6 W per luce
  • Flusso luminoso: 700 LM per light
  • Temperatura del colore: 3000K (bianco caldo)
  • Durata: 50,000 ore
  • Angolo del fascio: 120°
  • Grado di impermeabilità: Grado di protezione IP65
  • Temperatura di lavoro: Da -4°C a 130°C (da -20°F a 54°F)
  • Materiale: Alluminio lamp Testa
  • di registrazione: 270° Vertical Rotation, 360° Horizontal Rotation
Features and specifications of the 6W LED landscape lights

Figure 8: Key features of the 6W LED landscape lights, including IP65 waterproof rating, 50,000-hour lifespan, 3000K warm white, 700 lumens, 120° beam angle, and -4°F~130°F working temperature range.

10. Garanzia e supporto

WILAWELS products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official WILAWELS website. Please have your model number (D12LT06-W01SLP1006) available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.