1. Introduzione
The Jhoinrch RH-06 is a versatile USB to RS485/RS422 converter designed to facilitate bidirectional communication between computer USB ports and industrial equipment utilizing RS485 or RS422 interfaces. It is an ideal choice for automation, data acquisition, and various industrial applications, ensuring stable data transmission and broad device compatibility.
2. Caratteristiche del prodotto
- USB to RS485/RS422 Conversion: Effortlessly converts industrial equipment's RS485/RS422 interfaces to computer USB ports.
- FT232RNL Chip: Features the FT232RNL chip solution for high stability in data transmission and broad device compatibility across complex industrial applications.
- Protezione circuiti: TV integrata (Transient Voltage Suppressor), Overcurrent (OC), and ESD protection safeguards sensitive electronic components against voltage spikes, surges, and short circuits, ensuring long-term durability.
- Facile da usare: Supports automatic driver installation on most operating systems. Compatible with Windows 7/8/10/11, Linux, and macOS.
- Progettazione aperta: Unique open hardware layout facilitates heat dissipation, enhances stability, and simplifies debugging and integration.
Immagine: Oltreview of the Jhoinrch RH-06 converter highlighting its main features like USB to RS485/422 bidirectional communication, TVS, ESD, and 600W peak voltage protezione.
3. Contenuto della confezione
Si prega di verificare che tutti gli articoli siano presenti nel pacco:
- 1 x Jhoinrch USB to RS422/485 Adapter (Model RH-06)
- 1 x 3.81 Terminal Block
- 1 x Cacciavite
- 1 x Manuale utente
Image: The complete package contents for the Jhoinrch RH-06 converter.
4. Impostazione
4.1 Installazione del driver
The RH-06 adapter typically installs drivers automatically upon connection to a compatible operating system. If automatic installation does not occur, please refer to the official Jhoinrch support website for specific driver downloads and installation instructions.
4.2 Compatibilità del sistema
The adapter is fully compatible with a wide range of operating systems, including:
- Finestre 7/8/10/11
- Linux
- sistema operativo macOS
Image: The Jhoinrch RH-06 converter demonstrating compatibility with various operating systems.
4.3 Connessione hardware
- Connect the USB Type-A end of the RH-06 adapter to an available USB port on your computer (desktop or laptop).
- Using the provided terminal block and screwdriver, connect your RS485 or RS422 device to the corresponding pins on the adapter. Ensure correct polarity and pin assignments as detailed in the 'Pin Definitions' section.
5. Istruzioni per l'uso
5.1 Indicatori LED
The RH-06 adapter is equipped with three LED indicators to provide real-time status feedback:
- PWR (Potenza): Illuminates when the adapter is connected to a USB port and receiving power.
- TXLED (Transmit): Flashes when the computer is sending data through the adapter.
- RXLED (Receive): Flashes when the adapter is receiving data from the connected RS485/RS422 device.
Image: The Jhoinrch RH-06 converter with its three LED indicators labeled for Power, Data Transmitting, and Data Receiving.
5.2 Definizioni dei pin
Refer to the following pin definitions for correct wiring of your RS422 and RS485 devices. The adapter also includes a switch for a 120Ω termination resistor.
Image: Detailed pin definitions for RS422 and RS485 connections on the RH-06 adapter, including the 120Ω switch.
| Pin No. | RS422 | RS485 |
|---|---|---|
| 1 | Ricezione+ | A+ |
| 2 | RX | B- |
| 3 | TX | NC (nessuna connessione) |
| 4 | Trasmissione+ | NC (nessuna connessione) |
120Ω Resistor Switch: The adapter includes a switch to enable or disable a 120Ω termination resistor. This resistor is often required at the ends of an RS485/RS422 bus to prevent signal reflections. Consult your device's documentation for proper termination requirements.
6. Manutenzione
The Jhoinrch RH-06 adapter is designed for durability and requires minimal maintenance. Its built-in TVS, OC, and ESD protection features help ensure long-term reliability. To maintain optimal performance:
- Mantenere il dispositivo pulito e privo di polvere e detriti.
- Assicurarsi che tutti i collegamenti siano sicuri e privi di corrosione.
- Avoid exposing the device to extreme temperatures (-15°C to 70°C operating range) or high humidity (5%RH to 95%RH).
- Do not attempt to open or modify the device, as this may void the warranty and cause damage.
7. Risoluzione Dei Problemi
- Dispositivo non riconosciuto:
- Assicurarsi che la connessione USB sia sicura.
- Prova a collegare l'adattatore a una porta USB diversa del computer.
- Provare l'adattatore su un altro computer per escludere problemi specifici del sistema.
- If drivers are not automatically installed, manually install them from the official Jhoinrch support websito.
- Nessuna trasmissione/ricezione dati:
- Verify correct wiring according to the 'Pin Definitions' section. Incorrect polarity is a common issue.
- Check the TXLED and RXLED indicators for activity. If no LEDs flash during communication attempts, there might be a wiring or software configuration problem.
- Ensure the 120Ω termination resistor switch is set appropriately for your network configuration (e.g., enabled at the ends of a bus, disabled in the middle).
- Confirm that the baud rate and other communication parameters in your software match those of the connected device.
- Intermittent Connection or Data Errors:
- Check for loose connections at both the USB and terminal block ends.
- Ensure the device is within the specified transmission distance (up to 1.2km at low rates). For longer distances or more than 16 devices in a multi-point setup, using repeaters is recommended.
- Minimize electromagnetic interference by keeping the adapter and cables away from strong electrical noise sources.
8. Specifiche
Image: The Jhoinrch RH-06 converter highlighting its main features like USB to RS485/422 bidirectional communication, TVS, ESD, and 600W peak voltage protezione.
| Caratteristica | Descrizione |
|---|---|
| Tipo di prodotto | USB to RS485/422 Adapter |
| Numero di modello | RH-06 |
| Velocità in baud | 300-921600 bps |
| Interfaccia | USB 2.0 and RS485/422 |
| Connettore USB | USB-A |
| Protezione USB | 200mA self-recovery fuse, ESD protection |
| Connettore RS422/485 | Morsetto a vite |
| RS422/485 Pins | RX+, RX-, TX-, TX+ (for RS422); A+, B- (for RS485) |
| Controllo della direzione | Controllo automatico dell'hardware |
| Protezione | 600W lightning proof and surge-suppress, 15KV ESD protection (Onboard 120R balancing resistor) |
| Distanza di trasmissione | About 1.2km (low rate) |
| Modalità di trasmissione | Point-to-Multipoint (up to 32 nodes, repeaters recommended for >16 nodes) |
| Volume di eserciziotage | 5 V (tramite USB) |
| Temperatura ambiente di funzionamento | -15°C a 70°C |
| Umidità dell'ambiente operativo | Da 5% RH a 95% RH |
| Dispositivi compatibili | Desktop, portatile |
| Dimensioni (circa) | Lunghezza: 2.95 pollici, Larghezza: 0.98 pollici, Altezza: 0.47 pollici |
9. Informazioni sulla garanzia
The Jhoinrch RH-06 USB to RS485 RS422 Converter Adapter comes with a Garanzia di 1 anno from the date of purchase. This warranty covers manufacturing defects under normal use. For warranty claims or service, please retain your proof of purchase and contact Jhoinrch customer support.
La garanzia non copre i danni causati da:
- Installazione o uso improprio.
- Modifiche o riparazioni non autorizzate.
- Incidenti, abusi o negligenza.
- Operating outside the specified environmental conditions.
10. Supporto
For further assistance, technical support, or to download the latest drivers, please visit the official Jhoinrch website. When contacting support, please have your product model number (RH-06) and purchase details readily available to ensure efficient service.
You can typically find support resources and contact information on the brand's official Amazon store page or websito:
