1. Introduzione
The PCCOOLER DA240 ARGB Liquid CPU Cooler is an all-in-one (AIO) liquid cooling solution designed to provide efficient heat dissipation for your CPU. Featuring a 240mm aluminum radiator, dual 120mm ARGB PWM fans, and a full ceramic bearing pump, this cooler offers stable performance and customizable lighting effects. It is compatible with a wide range of Intel and AMD sockets, including the latest LGA1851/1700 and AM5 platforms.
2. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di procedere con l'installazione.
- PCCOOLER DA240 ARGB 240mm Liquid CPU Cooler (Pre-assembled with pump, radiator, and two 120mm ARGB PWM fans)
- Piastra posteriore Intel
- Staffa AMD
- Staffa Intel
- Intel & AMD Universal Screws and Nuts
- Intel 20XX Screws
- Viti del radiatore
- Thermal Paste (Note: The thermal paste will be shipped in either the new or old version at random. Please refer to the actual product received.)
Image: Included mounting hardware and accessories for Intel and AMD platforms.
3. Configurazione e installazione
This section outlines the general installation process. Specific steps may vary slightly based on your PC case and motherboard. Always refer to your motherboard manual for precise component placement.
3.1 Compatibilità
The PCCOOLER DA240 ARGB is compatible with the following CPU sockets:
- Informazioni: LGA115X/1200/1700/1851/20XX
- Deterioramento progressivo: AM4/AM5
3.2 Passaggi di pre-installazione
- Spegnere il computer e scollegare tutti i cavi.
- Aprire il case del PC per accedere alla scheda madre e all'area della CPU.
- Rimuovere l'eventuale dissipatore della CPU esistente. Pulire accuratamente la superficie della CPU per rimuovere la vecchia pasta termica.
3.3 Installing the Radiator and Fans
The two 120mm ARGB PWM fans are pre-installed on the 240mm aluminum radiator for convenience.
Image: High-capacity radiator with dense fin array for efficient heat transfer.
Image: Advanced 120mm ARGB PWM fan with specifications for speed, airflow, and static pressure.
- Determina la posizione di montaggio ottimale per il radiatore da 240 mm nel case del tuo PC (ad esempio, in alto, davanti).
- Secure the radiator to the case using the provided radiator screws. Ensure proper airflow direction (intake or exhaust) based on your case's cooling design.
3.4 Installing the Pump Block
Immagine: Esploso view of the low-noise pump featuring a large copper base for CPU heatsource coverage.
- Select the appropriate mounting bracket (Intel or AMD) and backplate for your motherboard socket.
- Attach the backplate to the rear of your motherboard, aligning the holes with the CPU socket.
- Applicare una piccola quantità di pasta termica al centro del dissipatore di calore integrato (IHS) della CPU.
- Carefully place the pump block onto the CPU, ensuring the copper base makes full contact.
- Secure the pump block with the universal screws and nuts, tightening them in a diagonal pattern until snug. Avoid over-tightening.
Image: The PCCOOLER DA240 ARGB Liquid CPU Cooler fully installed within a computer system.
3.5 Gestione dei cavi
The pre-installed fans feature a hidden daisy-chain connection, simplifying cable management.
Image: Durable, wear-resistant tubes ensuring maximum safety and longevity for the liquid cooling system.
- Connect the 4-pin PWM fan cable from the radiator to an available CPU_FAN or SYS_FAN header on your motherboard.
- Connect the 3-pin 5V ARGB cable from the pump head to a compatible 5V ARGB header on your motherboard.
- Route all cables neatly to ensure proper airflow and a clean build aesthetic.
4. Istruzioni per l'uso
4.1 Controllo dell'illuminazione ARGB
The pump head and fans support 5V 3-pin ARGB synchronization. This allows for customizable lighting effects.
Image: The infinitive ARGB halo lighting effect on the pump head, creating a vivid visual.
- To control the ARGB lighting, use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).
- Ensure the 5V ARGB cable is correctly connected to the motherboard header.
- Refer to your motherboard's manual for specific instructions on using its RGB software.
4.2 PWM Fan Control
The 120mm fans are PWM (Pulse Width Modulation) controlled, allowing for dynamic fan speed adjustments based on CPU temperature.
- Fan speed can be managed through your motherboard's BIOS/UEFI settings or dedicated fan control software.
- Configure fan curves to balance cooling performance and noise levels according to your preferences.
5. Manutenzione
Una manutenzione regolare aiuta a garantire prestazioni ottimali e longevità del dissipatore liquido della CPU.
- Rimozione della polvere: Pulire periodicamente le alette del radiatore e le pale della ventola per evitare l'accumulo di polvere, che può ostacolare il flusso d'aria e ridurre l'efficienza del raffreddamento. Utilizzare aria compressa o una spazzola morbida.
- Ispezione dei cavi: Check all cables (PWM, ARGB) for secure connections and signs of wear.
- Ispezione dei tubi: Visually inspect the wear-resistant tubes for any kinks, leaks, or damage.
- Funzionamento della pompa: Listen for any unusual noises from the pump. The full ceramic bearing pump is designed for low noise and durability.
6. Risoluzione Dei Problemi
If you encounter issues with your PCCOOLER DA240 ARGB, refer to the following common troubleshooting steps:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Temperature elevate della CPU | Improper thermal paste application; Loose pump block; Insufficient airflow; Dust buildup on radiator. | Reapply thermal paste; Ensure pump block is securely mounted; Check fan orientation and clean radiator; Adjust fan curves in BIOS. |
| Le ventole non girano / Nessuna illuminazione ARGB | Loose or incorrect cable connections; Motherboard RGB software not configured; Faulty fan/pump. | Verify all 4-pin PWM and 3-pin 5V ARGB cables are correctly connected; Check motherboard BIOS/software settings; Contact support if components are faulty. |
| Rumore insolito dal refrigeratore | Air bubbles in the loop (new installation); Fan rubbing against cables; Pump malfunction. | Allow system to run for a while to circulate coolant and remove air bubbles; Ensure no cables obstruct fan blades; Contact support if pump noise persists. |
7. Specifiche
Key technical specifications for the PCCOOLER DA240 ARGB Liquid CPU Cooler:
- Modello: DA240
- Metodo di raffreddamento: Liquido (AIO)
- Radiator Size: 240mm (277mm × 120mm × 27mm)
- Dimensione del ventilatore: Dual 120mm ARGB PWM Fans
- Velocità della ventola: 400-1800 RPM ±10% (Max 2500 RPM)
- Flusso d'aria della ventola: Up to 80.74 CFM (Max 73.6 CFM)
- Fan Static Pressure: Up to 2.91 mmH₂O (Max 2.43 mmH₂O)
- Livello di rumore: 36 decibel (massimo)
- Tipo di pompa: Full Ceramic Bearing Pump
- Velocità della pompa: 2600 RPM (Max 3000 RPM ±10%)
- Tipo di connettore di alimentazione: 4-Pin (PWM)
- Connettore ARGB: 3-Pin 5V
- Voltage: 12 Volt
- Cosatage: 15 Watt
- Dispositivi compatibili: Scrivania
- Peso dell'articolo: 2.87 libbre
8. Garanzia e supporto
PCCOOLER products are designed for reliability and performance.
- Garanzia: This product comes with a 2-year warranty from the date of purchase, ensuring long-lasting reliability and performance.
- Supporto tecnico: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact PCCOOLER customer support through their official websito o rivenditore presso cui è stato acquistato il prodotto.