Pagani Design PD-1811

Pagani Design PD-1811 Men's Chronograph Watch Instruction Manual

Introduzione

This manual provides detailed instructions for the Pagani Design PD-1811 Men's Chronograph Watch. This timepiece features a Japan VK64 quartz movement, a durable stainless steel case, scratch-resistant synthetic sapphire glass, and a comfortable PU leather strap. Please read these instructions carefully to ensure proper use and maintenance of your watch.

Pagani Design PD-1811 Chronograph Watch on a black background

Immagine: Frontale view of the Pagani Design PD-1811 Chronograph Watch.

Impostare

1. Disimballaggio e ispezione iniziale

Estrarre con cautela l'orologio dalla confezione. Ispezionare l'orologio per verificare la presenza di eventuali danni visibili. Assicurarsi che tutte le pellicole protettive siano rimosse dal vetro e dal fondello.

2. Regolazione del cinturino

The PU leather strap is designed for comfort. If adjustment is needed, consult a professional watchmaker or follow standard strap adjustment procedures for buckle-type straps.

3. Impostazione di ora e data

Lato view of Pagani Design PD-1811 watch showing crown and pushers

Immagine: Lato view dell'orologio, evidenziando la corona e i pulsanti del cronografo.

  1. Impostazione dell'ora: Pull the crown (middle button on the right side) out to position 2. Rotate the crown to set the hour and minute hands. Push the crown back to position 0 to start the watch.
  2. Impostazione della data: Pull the crown out to position 1. Rotate the crown to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can interfere with the automatic date change mechanism. Push the crown back to position 0 when finished.

Funzionamento del cronografo

Your Pagani Design PD-1811 watch features a chronograph function for measuring elapsed time.

Video: Demonstration of the Pagani Design PD-1811 watch features, including chronograph operation and time setting.

  1. Avvio/Arresto: Press the upper pusher (button A) to start the chronograph. Press it again to stop the measurement.
  2. Reset: Mentre il cronografo è fermo, premere il pulsante inferiore (pulsante B) per riportare tutte le lancette del cronografo alla posizione zero.

Display luminoso

The watch features a high-intensity luminous display. After absorbing sufficient light energy, the hands and markers will glow in dark environments, allowing for easy time reading.

Quadrante dell'orologio Pagani Design PD-1811 che si illumina al buio

Image: The watch dial displaying its luminous properties in low light.

Manutenzione

  • Pulizia: Wipe the watch case and strap regularly with a soft, dry cloth to remove dust and dirt. For the stainless steel case, a slightly damp si può usare un panno e poi uno asciutto.
  • Resistenza all'acqua: The watch is water-resistant to 50 meters. This means it can withstand splashes, rain, and brief immersion in water. Do not press any buttons while the watch is underwater. Avoid using the watch in hot showers, saunas, or steam rooms, as extreme temperatures and steam can compromise the water seals.
  • Temperatura: Avoid exposing the watch to extremely hot or cold temperatures for prolonged periods, as this can affect the movement's accuracy and battery life.
  • Prodotti chimici: Evitare il contatto con solventi, detergenti, profumi e cosmetici, poiché potrebbero danneggiare la cassa, il cinturino o le guarnizioni.
  • Cura del cinturino: The PU leather strap should be kept dry and clean. Avoid prolonged exposure to direct sunlight or moisture to prevent degradation.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
Orologio non in funzioneBatteria scaricaReplace the battery at a qualified watch service center.
Il tempo è imprecisoMagnetic interference or extreme temperature exposureReset the time. If inaccuracy persists, consult a professional.
La data non cambia a mezzanotteOra impostata in modo errato (AM/PM)Adjust the time by 12 hours. Ensure the date is not set between 9 PM and 3 AM.
Le lancette del cronografo non si azzeranoRichiede calibrazioneConsult the watch movement's specific calibration instructions or a professional watchmaker.

Specifiche

Diagramma che mostra le dimensioni dell'orologio Pagani Design PD-1811

Image: Detailed diagram illustrating the dimensions of the PD-1811 watch.

CaratteristicaDettaglio
ModelloCodice PD-1811
MovimentoQuarzo VK64 giapponese
Materiale della cassaAcciaio inossidabile
Diametro della cassa44 mm (1.73 pollici)
Spessore della cassa12.8 mm (0.50 pollici)
Materiale del cinturinoPelle PU
Larghezza della cinghia22 mm (0.86 pollici)
Perimetro massimo225 mm (8.86 pollici)
Peso98.4 g (0.21 libbre)
Tipo di vetroVetro zaffiro sintetico
Resistenza all'acqua50 Meters (Waterproof)
Tipo di visualizzazioneAnalogico
Tipo di chiusuraChiusura pieghevole
LuminosoAlta intensità

Garanzia e supporto

This Pagani Design PD-1811 watch comes with a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the seller directly.

If you have any questions, require technical assistance, or need to claim warranty service, please contact the seller, TOYAR Deals, through your purchase platform. They will be able to provide further support and guidance.

© 2026 Pagani Design. Tutti i diritti riservati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.