Manuale di istruzioni per scaldamani UNIHAND AI (modello AOY-766)

Introduzione

This manual provides essential information for the safe and effective use of your UNIHAND AI Hand Warmers. Please read these instructions thoroughly before operating the device and retain for future reference.

Prodotto finitoview

The UNIHAND AI Hand Warmers are a set of two rechargeable electric heating devices designed to provide warmth in cold conditions. They feature an intelligent AI temperature control chip for precise heat management and extended battery life.

Figure 1: Two UNIHAND AI Hand Warmers.

Progettazione 2 in 1

The hand warmers can be used individually or combined into a single palm-sized unit for 360-degree warmth. This portable design is suitable for various activities such as travel, hunting, golf, hiking, camping, and skiing.

Figure 2: The 2-in-1 design allows for combined or separate use.

Chip sensore di temperatura AI

Integrated intelligent AI temperature control chips provide three levels of precise heat release. The chip continuously analyzes and recognizes the temperature between the hand warmer and your hands, ensuring optimal comfort and safe heating up to a maximum of 130°F (54°C).

Figura 3: Interno view of the AI Smart Chip for temperature control.

Impostare

Charging the Hand Warmers

Before first use, fully charge both hand warmers. The device includes a Type-C charging cable designed to charge both units simultaneously from a single power source.

1. Connect the dual Type-C ends of the charging cable to the charging ports on each hand warmer.
2. Connect the USB-A end of the cable to a compatible USB power adapter (not included).
3. During charging, blue indicator lights will illuminate to show the charging status.
4. Una carica completa richiede in genere circa 4 ore.

Figure 4: Charging the UNIHAND AI Hand Warmers with the included dual Type-C cable.

Istruzioni per l'uso

Power On/Off and Heat Level Adjustment

The hand warmers feature a single button for control.

• Per accendere/spegnere: Long press the orange button for approximately 3 seconds. Red indicator lights will illuminate when the device is on.
• To Adjust Heat Levels: Short press the orange button while the device is on to cycle through the three heat settings.
• To Check Battery Life: Double press the orange button. Blue indicator lights will show the remaining battery power.

Figure 5: Easy-to-use single button control for UNIHAND AI Hand Warmers.

Temperature Settings and Battery Life

The hand warmers offer three distinct temperature levels, indicated by red lights, and varying battery durations:

• Livello 1 (Basso): 95-107.5°F (35-42°C) - Up to 20 hours of warmth. (One red light)
• Livello 2 (Medio): 104-118.5°F (40-48°C) - Up to 14 hours of warmth. (Two red lights)
• Livello 3 (Alto): 118.5-130°F (48-54°C) - Up to 8.5 hours of warmth. (Three red lights)

Battery status is indicated by blue lights:

• Una luce blu: Meno del 35% di batteria rimanente.
• Due luci blu: Batteria rimanente al 35-70%.
• Tre luci blu: Batteria rimanente al 70-100%.

Figure 6: Indicator lights for temperature and battery status.

Manutenzione

To ensure the longevity and optimal performance of your UNIHAND AI Hand Warmers, follow these maintenance guidelines:

• Pulizia: Wipe the surface of the hand warmers with a soft, dry cloth. Do not use abrasive cleaners or immerse the devices in water.
• Magazzinaggio: Store the hand warmers in a cool, dry place when not in use. Avoid extreme temperatures and direct sunlight.
• Cura della batteria: For prolonged storage, ensure the devices are partially charged (around 50%) to maintain battery health. Recharge them periodically if stored for extended periods.

Risoluzione dei problemi

If you encounter any issues with your UNIHAND AI Hand Warmers, consider the following common solutions:

• Dispositivo non si accende: Ensure the hand warmers are fully charged. Connect them to the charging cable and check if the blue indicator lights appear.
• Calore insufficiente: Verify that the device is set to the desired heat level (one, two, or three red lights). Allow a few moments for the device to reach its full temperature.
• Problemi di ricarica: Check the charging cable and adapter for any damage. Try using a different USB power source. Ensure the Type-C connectors are fully inserted into the hand warmers.

Se i problemi persistono, consultare la sezione garanzia e supporto per ulteriore assistenza.

Specifiche

Garanzia e supporto

Your UNIHAND AI Hand Warmers come with a Garanzia di 2 anno. For warranty claims, technical support, or any product-related inquiries, please contact UNIHAND customer service through the retailer where the product was purchased or visit the official UNIHAND websito per le informazioni di contatto.

Figure 7: UNIHAND warranty information.