1. Prodotto finitoview
The Phanteks XT View Matrix is a mid-tower ATX gaming PC case designed for high-performance builds. It features a customizable 600-LED Matrix Display, dual tempered glass panels, and support for rear-connector motherboards. The case includes three D-RGB fans for efficient cooling and offers extensive compatibility for modern hardware.
Caratteristiche principali:
- 600-LED Matrix Display: A fabric-covered screen for dynamic lighting, system statistics, and custom animations.
- Rear-Connector Motherboard Support: Designed for back-connector ATX mainboards to facilitate a clean, cable-free interior.
- Dual Tempered-Glass Panels: Front and side tempered-glass windows to showcase internal components.
- High-Airflow Cooling: Pre-equipped with 3x M25-120mm D-RGB fans, supporting up to 9x 120mm fan positions.
- Optimized Liquid-Cooling Layout: Supports top-mount 360mm radiators.
- Full-Size GPU Compatibility: Accommodates large modern graphics cards.
2. Configurazione e installazione
Before beginning installation, ensure all components are compatible and you have the necessary tools. Refer to your motherboard and component manuals for specific installation instructions.
2.1. Preparazione del caso
Carefully unpack the Phanteks XT View Matrix case. Remove the tempered glass side panels by unscrewing the thumb screws at the rear and gently sliding them off. Store them safely to prevent damage.

Image: Phanteks XT View Matrix PC Case with the side panel removed, showing the internal layout and fan mounts.
2.2. Installazione della scheda madre
Install the motherboard standoffs if not pre-installed. Carefully align your ATX, Micro ATX, or Mini ITX motherboard with the standoffs and secure it with screws. For rear-connector motherboards, ensure proper alignment with the case's cutouts for a clean setup.

Immagine: Interna view of the Phanteks XT View Matrix case, highlighting the motherboard tray and designated areas for rear-connector mainboards and PSU support.
2.3. Installazione dell'unità di alimentazione (PSU)
Install the PSU into its designated compartment, typically at the bottom rear of the case. Secure it with screws. Route power cables through the cable management cutouts.
2.4. Installazione dell'unità di archiviazione
The case supports 3.5" HDDs and 2.5" SSDs. Mount your storage drives into the available drive bays or mounting points. Refer to the case's internal layout for specific locations.

Immagine: Interna view of the Phanteks XT View Matrix case, illustrating the locations for 3.5" HDDs and 2.5" SSDs, along with the power supply area.
2.5. Installazione della scheda grafica (GPU)
Installa la scheda grafica nello slot PCIe appropriato sulla scheda madre. Il case offre ample clearance for large GPUs. Ensure it is securely seated and fastened.

Image: A Phanteks XT View Matrix case showcasing a large graphics card installed, demonstrating compatibility with high-end hardware.
2.6. Installazione del sistema di raffreddamento (ventole e radiatori)
The case comes with three pre-installed D-RGB fans. Additional fans (up to 9x 120mm) or liquid cooling radiators can be installed. The top panel supports up to a 360mm radiator.

Image: Phanteks XT View Matrix case illustrating high airflow cooling, including the three included 120mm D-RGB fans and various fan/radiator mounting positions.
2.7. Collegamento dei cavi I/O anteriori
Connect the front I/O cables (USB 3.2 Gen2 Type-C, USB 3.0, audio, power, reset, and D-RGB lighting controls) to the corresponding headers on your motherboard. Ensure correct polarity for power and reset switches.

Immagine: Primo piano view of the Phanteks XT View Matrix's easy accessible front I/O panel, featuring USB-C 3.2 Gen2, USB 3.0, power/reset buttons, and lighting controls.
3. Funzionamento
3.1. Accensione
After all components are installed and cables connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front I/O panel to start your system.
3.2. 600-LED Matrix Display Control
The integrated 600-LED Matrix Display can be customized for dynamic lighting, system statistics, and personalized visuals. To fully utilize its features, download and install the Phanteks Nexlinq app.

Image: The Phanteks XT View Matrix case displaying dynamic system stats and animations on its 600-LED Matrix screen, alongside a visual representation of the Phanteks Nexlinq app interface.
3.3. Customizing the Matrix Display
Using the Phanteks Nexlinq app, you can:
- Select from an expanded widget library of presets.
- Create your own custom designs and animations using the Matrix Editor.
- Display real-time system information such as CPU/GPU usage, fan speeds, and time.

Immagine: Vari examples of customizable displays on the Phanteks XT View Matrix's LED Matrix, including text, system stats, and pixel art, created using the Nexlinq app's Matrix Editor.
3.4. Front I/O Port Usage
Il pannello I/O frontale fornisce un comodo accesso a:
- USB-C 3.2 Gen2: Per il trasferimento dati ad alta velocità con dispositivi compatibili.
- Porta USB 3.0: Per collegare dispositivi USB standard.
- Mic/Headphone Jack: Per l'ingresso e l'uscita audio.
- Pulsanti di controllo dell'illuminazione: To cycle through D-RGB lighting modes without software.
4. Manutenzione
Una manutenzione regolare aiuta a garantire prestazioni ottimali e longevità dei componenti del PC.
4.1. Pulizia del filtro antipolvere
The Phanteks XT View Matrix case is equipped with dust filters to prevent dust buildup. Periodically remove and clean these filters. Gently brush off accumulated dust or rinse with water and allow them to dry completely before reinstallation.
4.2. Pulizia degli interni
With the system powered off and unplugged, carefully open the side panels. Use compressed air to remove dust from internal components such as fans, heatsinks, and the motherboard. Avoid touching components directly.
4.3. Cura del vetro temperato
Pulisci i pannelli in vetro temperato con un panno morbido e privo di lanugine e un detergente delicato per vetri. Evita materiali abrasivi che potrebbero graffiare il vetro.
5. Risoluzione Dei Problemi
Questa sezione affronta i problemi più comuni che potresti riscontrare con il case del tuo PC.
5.1. Il sistema non si accende
- Controllare i collegamenti di alimentazione: Ensure the PSU is properly connected to the wall outlet and the motherboard (24-pin ATX, 8-pin CPU) and graphics card.
- Connettori del pannello frontale: Verify that the power switch cable from the front I/O panel is correctly connected to the motherboard's front panel header.
- Interruttore PSU: Confirm the power switch on the back of the PSU is in the "ON" position.
5.2. Fans Not Spinning or D-RGB Not Lighting Up
- Collegamenti della ventola: Ensure all fan cables are securely connected to the motherboard fan headers or a fan controller.
- D-RGB Connections: Verify that the D-RGB cables are correctly connected to the motherboard's D-RGB header or the case's integrated D-RGB controller.
- Software/Buttons: If using the Phanteks Nexlinq app, check its settings. If using physical buttons, try cycling through modes.
5.3. Front I/O Ports Not Functioning
- USB/Audio Headers: Check that the USB 3.0, USB-C, and audio cables from the front I/O panel are correctly connected to their respective headers on the motherboard.
- Installazione del driver: Ensure all necessary motherboard drivers, especially for USB and audio, are installed.
6. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Fantasmi |
| Nome del modello | XT View Matrice |
| Tipo di caso | Mid Tower |
| Compatibilità della scheda madre | ATX, Micro ATX, Mini ITX |
| Colore | Nero carbone |
| Materiale | ABS Plastic, Alloy Steel, Polyester Fabric, Tempered Glass Window |
| Dimensioni dell'articolo (P x L x A) | 17.32"P x 9.06"L x 19.69"A |
| Peso dell'articolo | 17.5 libbre |
| Internal Bays Quantity | 7 (for 3.5" HDD and 2.5" SSD) |
| Porte USB 3.0 totali | 1 |
| USB-C 3.2 Gen2 Ports | 1 |
| Ventilatori inclusi | 3x M25-120mm D-RGB Fans |
| Metodo di raffreddamento | Aria, Acqua |
| Caratteristiche speciali | 600 LED Matrix Display, Tempered Glass Window, Rear-Connector Ready |
7. Informazioni sulla garanzia
This product comes with a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official Phanteks website or contact their customer support. Please retain your proof of purchase for warranty claims.
Warranty Description: 1 year (as per product specifications)
8. Assistenza clienti
For technical assistance, troubleshooting, or further inquiries, please visit the official Phanteks website or contact their customer support team. You can typically find support resources, FAQs, and contact information on their websito.
Phanteks Ufficiale Websito: www.phanteks.com