ACEBEAM E10 2.0 Longest-Range Pocket EDC Flashlight User Manual

1. Introduzione

Thank you for choosing the ACEBEAM E10 2.0 Longest-Range Pocket EDC Flashlight. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before operation and retain it for future reference.

Cosa c'è nella scatola

• E10 2.0 Flashlight (Battery Included) x 1
• Cordino x 1
• O-ring x 2
• Cavo USB x 1
• Manuale utente x 1

2. Caratteristiche del prodotto

• Longest-Range Pocket EDC Flashlight: Compact design (3.47in long, 3.76oz) with a custom TIR optic and CREE XP-LR LED, delivering up to 1,200 lumens and a beam distance of 715 meters.
• Base magnetica: The magnetic tail cap allows secure attachment to metal surfaces for hands-free operation.
• Ricaricabile: Features a USB-C rechargeable 16340 battery (included).
• Durevole e robusto: Constructed from aerospace-grade AL6061-T6 aluminum with a hard-anodized finish. Rated IP68 for waterproof performance and 1.5-meter impact resistance.
• Facile da trasportare: Designed for everyday carry, fitting easily into pockets.
• Intuitive Side Switch: Provides smooth, one-handed control for mode changes.

Immagine: Oltreview of the ACEBEAM E10 2.0 flashlight highlighting its key features.

3. Impostazione

Installazione della batteria

1. Svitare il tappo posteriore della torcia.
2. Inserire la batteria ricaricabile 16340 inclusa con il polo positivo (+) rivolto verso la testa della torcia.
3. Screw the tail cap back on securely. Ensure the O-ring is properly seated to maintain waterproof integrity.

Note: The E10 2.0 is compatible with CR123A batteries, but the included 16340 battery offers USB-C charging capability.

Carica della batteria

The included 16340 battery features a built-in USB-C charging port. To charge:

1. Unscrew the tail cap and remove the 16340 battery from the flashlight.
2. Individuare la porta USB-C sul lato della batteria.
3. Connect the provided USB-C cable to the battery and a suitable USB power source (e.g., phone charger, laptop).
4. La spia luminosa sulla batteria indicherà lo stato di carica (in genere rossa per la carica in corso, verde per la carica completa).
5. Once fully charged, disconnect the cable and reinsert the battery into the flashlight, ensuring the tail cap is tightened.

Image: The ACEBEAM E10 2.0 flashlight demonstrating its convenient USB-C charging capability.

4. Istruzioni per l'uso

The ACEBEAM E10 2.0 features an intuitive side switch for easy operation.

Funzionamento di base

• Attiva/disattiva: Single press the side switch to turn the flashlight on or off.
• Modifica i livelli di luminosità: When the flashlight is on, press and hold the side switch to cycle through Ultra-Low, Low, Medium, and High modes. Release the switch to select the desired brightness.

Modalità speciali

• Modalità Turbo: Double-press the side switch quickly to activate Turbo mode (1200 lumens). Double-press again to return to the previously used mode.
• Modalità strobo: Triple-press the side switch quickly to activate Strobe mode. Triple-press again to return to the previously used mode.

Funzione di blocco

To prevent accidental activation, the flashlight has a lockout function:

• Attiva blocco: When the flashlight is off, press and hold the side switch for approximately 3 seconds until the light flashes briefly, indicating it is locked.
• Disattiva blocco: Press and hold the side switch for approximately 3 seconds until the light turns on in Ultra-Low mode, indicating it is unlocked.

Image: Illustration of the intuitive side switch and available lighting modes.

5. Manutenzione

Pulizia

• Pulire il corpo della torcia con un panno pulito e morbido.
• Clean the lens with a lens cloth to maintain optimal light output.

Cura della batteria

• Charge the battery regularly, especially if the flashlight will not be used for an extended period.
• Conservare la batteria in un luogo fresco e asciutto.

O-Ring

• Periodically inspect the O-rings for wear or damage.
• Replace damaged O-rings with the provided spares to maintain the IP68 waterproof rating.
• Apply a thin layer of silicone grease to the O-rings to ensure a good seal and prevent drying.

6. Risoluzione Dei Problemi

• La torcia non si accende:
      - Ensure the battery is correctly installed with the positive (+) end facing the head.
      - Check if the battery is charged. Remove and charge the battery using the USB-C port.
      - Verify the flashlight is not in lockout mode. Press and hold the side switch for 3 seconds to unlock.
• La luce è fioca o tremolante:
      - The battery level may be low. Recharge the battery.
      - Ensure the tail cap is fully tightened. A loose connection can cause intermittent power.
• Water ingress after exposure:
      - Check the O-rings for any damage or improper seating. Replace if necessary and ensure they are lubricated.
• La torcia si surriscalda durante l'uso:
      - High brightness modes (especially Turbo) generate significant heat. This is normal. The flashlight has built-in thermal regulation to prevent overheating by automatically reducing output.

If you experience issues not covered here, please contact ACEBEAM customer support.

7. Specifiche

Image: Detailed technical specifications table for the E10 2.0 flashlight.

8. Garanzia e supporto

Informazioni sulla garanzia

The ACEBEAM E10 2.0 flashlight comes with a Garanzia del produttore di 10 anni, garantendo affidabilità e tranquillità a lungo termine.

Assistenza clienti

For any questions, technical assistance, or warranty claims, please contact ACEBEAM customer support or visit the official ACEBEAM store online.

Official ACEBEAM Store: Visita il negozio