Dioche 3.5-inch Digital Door Peephole ViewManuale dell'utente

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your Dioche 3.5-inch Digital Door Peephole Viewer. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Prodotto finitoview

2.1 Componenti

• Indoor Unit (LCD display)
• Outdoor Unit (Peephole Camera)
• Staffa di fissaggio
• Borsa a vite

2.2 Specifiche

3. Informazioni sulla sicurezza

• Assicurarsi che la polarità delle batterie sia corretta quando si inseriscono le batterie.
• Non esporre il dispositivo a temperature estreme o umidità.
• Tenere fuori dalla portata dei bambini.
• Non tentare di smontare o riparare l'unità da soli. Contattare personale qualificato per l'assistenza.

4. Configurazione e installazione

Before installation, ensure your door's thickness and peephole diameter are within the specified ranges (Door Hole: 14-28mm, Door Thickness: 40-100mm).

4.1 Contenuto della confezione

Verificare che tutti i componenti siano presenti:

• 1 x Outdoor Unit (Peephole Camera)
• 1 x Indoor Unit (LCD Display)
• Staffa di montaggio 1 x
• 1 x Bag of Screws

Image: Complete kit showing the indoor display unit, outdoor camera, and mounting hardware.

4.2 Passaggi di installazione

1. Rimuovere lo spioncino esistente: If an existing peephole is present, unscrew and remove it from the door. If not, drill a hole of appropriate diameter (14-28mm) at the desired height.
2. Installare l'unità esterna: Insert the outdoor unit (camera) through the door hole from the outside. Ensure the camera is facing outwards and the cable is threaded through to the inside of the door.


Image: The outdoor camera unit with its flexible connection cable.

3. Fissare la staffa di montaggio: From the inside of the door, slide the mounting bracket over the outdoor unit's cable and align it with the outdoor unit. Secure the bracket using the appropriate screws from the screw bag, ensuring it is tight against the door.

Image: The indoor display unit with its battery compartment open, showing the mounting plate and screw holes.
4. Collegare l'unità interna: Collegare il cavo dall'unità esterna alla porta corrispondente sul retro dell'unità display interna.
5. Inserire le batterie: Open the battery compartment on the back of the indoor unit and insert 4 AAA batteries (not included), observing correct polarity.
6. Montare l'unità interna: Align the indoor unit with the mounting bracket and slide it downwards until it clicks securely into place.


Image: The indoor display unit (screen off) and the outdoor camera unit, along with the various screws for installation.

5. Istruzioni per l'uso

5.1 Accensione/Spegnimento

The device typically powers on automatically when the button on the indoor unit is pressed. It will power off after a short period of inactivity to conserve battery life.

5.2 Viewvisitatori

Press the button on the indoor unit to activate the screen and view who is at your door. The 3.5-inch LCD will display a clear image from the 120-degree wide-angle camera.

Image: The indoor display unit showing a live feed from the outdoor camera, with the outdoor unit visible.

6. Manutenzione

• Pulizia: Wipe the screen and camera lens with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Sostituzione della batteria: When the low power alert is displayed, replace all 4 AAA batteries promptly.
• Condizioni ambientali: Avoid exposing the device to direct sunlight for extended periods or extreme weather conditions.

7. Risoluzione Dei Problemi

8. Garanzia e supporto

This Dioche product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact Dioche customer support.

For technical support or inquiries, please visit the official Dioche webo contattare il servizio clienti. Conservare la ricevuta d'acquisto per eventuali reclami in garanzia.