Prodotto finitoview
The NEWFAST AC1200 Dual Band WiFi Extender is designed to expand your wireless network coverage and eliminate Wi-Fi dead zones. It supports high-speed data transfer up to 1200 Mbps, utilizing both 2.4 GHz and 5 GHz frequency bands for optimal performance. Equipped with four high-gain antennas, this extender ensures broad signal coverage and stable connections for multiple devices.
Image: The NEWFAST AC1200 WiFi Extender, showcasing its four adjustable antennas and front LCD display.
Key features include easy setup via WPS or a web interface, multiple operating modes (Repeater, Bridge, AP, Router, Client), and robust WPA/WPA2 security protocols to protect your network.
Istruzioni di installazione
Metodo 1: WPS (Wi-Fi Protected Setup)
If your main router supports the WPS function, you can set up the extender quickly using the WPS button.
- Plug the NEWFAST AC1200 WiFi Extender into a power outlet near your main router.
- Wait for the extender to power on completely.
- Premere il tasto Pulsante WPS sul router principale.
- Entro due minuti, premere il tasto Pulsante WPS/Reset on the NEWFAST AC1200 WiFi Extender.
- The extender's OLED screen will flash, indicating a successful connection.
- Once connected, you can unplug the extender and move it to a desired location within your router's Wi-Fi range.
Metodo 2: Web Configurazione dell'interfaccia
For routers without WPS or for more advanced configuration, use the web interfaccia.
- Plug the NEWFAST AC1200 WiFi Extender into a power outlet.
- On your computer or mobile device, connect to the extender's default Wi-Fi network (e.g., "NEWFAST-2G" or "NEWFAST-5G"). No password is required initially.
- Aprire un web browser e inserisci l'indirizzo IP predefinito: 192.168.10.1 nella barra degli indirizzi.
- Inserisci la password predefinita: amministratore and click "LOGIN".
- Follow the on-screen instructions to select your main Wi-Fi network and enter its password.
- Configure the extender's network name (SSID) and password if desired.
- Salvare le impostazioni e attendere il riavvio dell'extender.
- Reconnect your devices to the new extended Wi-Fi network.
Modalità operative
The NEWFAST AC1200 WiFi Extender supports five different operating modes to suit various network requirements:
- Modalità ripetitore: Estende la copertura Wi-Fi esistente del router principale. Questa è la modalità più comune per eliminare le zone morte.
- Modalità Ponte: Collega due reti separate, consentendo ai dispositivi su entrambe le reti di comunicare.
- Modalità AP (punto di accesso): Converte una connessione di rete cablata in una wireless. Ideale per creare un nuovo hotspot Wi-Fi da una porta Ethernet.
- Modalità router: Functions as a primary router, creating a new private network. This mode is suitable if you have a modem but no router.
- Modalità cliente: Consente ai dispositivi cablati (ad esempio, smart TV, console di gioco) di connettersi a una rete wireless tramite la porta Ethernet dell'extender.
The Ethernet port on the side of the extender can be used to connect wired devices or for AP/Router mode configurations.
Manutenzione
Ripristino dell'extender
If you encounter issues or wish to reconfigure the extender, you may need to perform a factory reset. There are two methods:
- Method 1: Hardware Reset
- With the extender powered on, press and hold the Pulsante WPS/Reset until the OLED screen flashes three times.
- Rilasciare immediatamente il pulsante.
- The extender will reset to its factory default settings.
- Method 2: Software Reset (via Web Interfaccia)
- Connect to the extender's Wi-Fi network (e.g., "NEWFAST-2G" or "NEWFAST-5G").
- Aprire un web browser e vai a 192.168.10.1.
- Log in with the password amministratore.
- On the settings page, locate and click the "Homepage" button (usually in the upper right corner).
- Select "Restore by default" or "Factory Reset" to reset the extender.
Risoluzione dei problemi
Slow Speed After Setup
If you experience slow network speeds after setting up the extender, consider the following:
- Posizionamento dell'estensore: Ensure the extender is not too far from your main router. While extenders increase coverage, optimal performance requires a good signal from the source. Adjust the extender's position to be within a strong signal area of your main router.
- Sorgente del segnale: Wi-Fi extenders primarily extend the coverage of wireless signals; they do not increase the actual internet speed provided by your ISP. The speed of the extended signal is determined by the speed of your main router's signal.
- Interferenza: Walls, large metal objects, and other electronic devices can interfere with Wi-Fi signals. Try repositioning the extender away from such obstacles.
- Selezione della banda: For higher speeds, ensure your devices are connecting to the 5 GHz band of the extender, if supported by both the device and the extender's configuration. The 2.4 GHz band offers better range but lower speeds.
Cadute o instabilità della connessione
- Aggiornamento del firmware: Check the NEWFAST website for any available firmware updates for your AC1200 extender. Updating firmware can resolve known issues and improve stability.
- Interferenza del canale: Nel web interfaccia, prova a cambiare il canale Wi-Fi per le bande da 2.4 GHz e 5 GHz con uno meno congestionato.
- Overloaded Network: If too many devices are connected to the extender, it might lead to instability. Consider reducing the number of connected devices or upgrading your main router if the issue persists.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Standard | IEEE802.11ac/a/b/g/n |
| Antenne | 4 x 3dBi High-Gain, 180° Rotatable |
| Velocità di trasferimento dati | Fino a 1200 Mbps (300 Mbps per 2.4 GHz, 867 Mbps per 5 GHz) |
| Banda di frequenza | Dual Band (5 GHz / 2.4 GHz) |
| Sicurezza | WPA-PSK/WPA2-PSK/WPA2 |
| Compatibilità | Compatible with all IEEE802.11ac/a/b/g/n compliant routers/modems |
| Caratteristiche speciali | WPS One-Click Setup, Repeater/Router/AP Mode, Smart LCD Screen, Ethernet Port |
| Colore | Nero |
| Componenti inclusi | 1x AC1200 WiFi Extender, 1x Ethernet Cable, 1x Multi-language User Manual |
Sicurezza e protezione
The NEWFAST AC1200 WiFi Extender supports WPA-PSK / WPA2-PSK WPA / WPA2 encryption to ensure the security of your network and block unauthorized access. Always use strong, unique passwords for your Wi-Fi network and the extender's administration interface.
Nota importante: The range of signal extension will be influenced by factors such as house structure and usage environment. The signal transmission speed after extension primarily depends on the upstream equipment (your main router/ISP speed).
Garanzia e supporto
Specific warranty information is not provided in this document. Please refer to the warranty card included in the product packaging or contact NEWFAST customer support for details regarding warranty coverage and service.
If you have any questions or require further assistance, please do not hesitate to contact NEWFAST customer support. Contact information can typically be found on the official NEWFAST websito o nella documentazione allegata.
