1. Introduzione
This manual provides essential information for the safe and efficient operation of your Anern 5000W 24V Hybrid Solar Inverter, Model AN-FGI-S5000. This all-in-one solar inverter integrates a 5000W pure sine wave inverter, a 160A MPPT solar charge controller, and a battery charger function into a single unit. It is designed for off-grid solar applications, converting 24V DC battery power to 220-240V AC for various loads. Please read this manual thoroughly before installation and use.
Image 1.1: Application Range. This image illustrates various applications for the Anern Hybrid Solar Inverter, including emergency electricity, home appliance power, yacht power, photovoltaic rooftop systems, agricultural electricity, and outdoor camping.
2. Istruzioni di sicurezza
- Prima dell'installazione e dell'uso, leggere tutte le istruzioni e le avvertenze contenute nel presente manuale.
- L'installazione deve essere eseguita da personale qualificato nel rispetto di tutte le normative elettriche locali.
- Non smontare l'inverter. All'interno non sono presenti parti riparabili dall'utente. Per la manutenzione, rivolgersi a personale qualificato.
- Garantire un'adeguata ventilazione intorno all'inverter per evitare il surriscaldamento.
- Connect the inverter only to a battery bank with the specified voltage (24 V CC).
- Always disconnect all power sources (PV, AC grid, battery) before performing any maintenance or wiring.
- Durante l'installazione e la manutenzione, indossare adeguati dispositivi di protezione individuale (DPI), tra cui guanti isolanti e protezioni per gli occhi.
- Tenere i bambini lontani dall'inverter e dai suoi collegamenti.
3. Prodotto finitoview
3.1 Caratteristiche principali
- Design tutto in uno: Combines a 5000W pure sine wave inverter, 160A MPPT solar charge controller, and battery charger.
- Voltage Compatibilità: 24V DC input to 220-240V AC output, compatible with 50Hz/60Hz.
- Elevato input fotovoltaico: Maximum PV input power of 9000W, with an operating PV voltage range of 60V DC to 450V DC.
- Doppia uscita CA: Features primary and secondary AC outputs for optimized energy management.
- Funzionamento senza batteria: Capable of powering loads directly from PV/AC without a connected battery.
- Compatibilità della batteria: Supports various battery types, including lithium and lead-acid (recommended capacity ≥ 200Ah).
- Impostazioni configurabili: Il display LCD consente la configurazione del volume di ingressotage range, battery charge current, and AC/solar charge priority.
- Protezione completa: Includes overload, over-temperature, short-circuit, over-voltage, sotto-volumetage, over-current, and backfill protection.
- Riavvio automatico: Automatically restarts when AC grid power is restored.
Image 3.1: Inverter Overview. This image highlights the key specifications and features of the Anern 5000W Off-Grid Solar Inverter, including its 24V DC to 220/230/240V AC conversion, pure sine wave output, 160A MPPT controller, 9000W max PV input, 450VDC max PV VOC, and 160A max charging current.
3.2 LCD Display and RGB Indicators
The hybrid inverter is equipped with an LCD screen that displays real-time system data and operational status. An RGB light indicator provides visual feedback on the inverter's current mode:
- Bianco: Modalità standby
- Rosso: Battery Mode (operating from battery power)
- Blu: City Electric Mode (operating from grid power)
- Intervallo 0: Photovoltaic Mode (operating from solar power)
4. Configurazione e installazione
4.1 Specifiche di cablaggio
Ensure all wiring is correctly sized and installed according to local electrical codes. The following cable sizes are recommended:
- Cavo della batteria: 2 AWG / 25 mm²
- Cavo di uscita CA: 12 AWG / 4 mm²
- Cavo di ingresso CA: 10 AWG / 5.26 mm²
- Photovoltaic (PV) Cable: 10 AWG / 5.26 mm²
4.2 Compatibilità della batteria
The inverter is compatible with various 24V battery types. A minimum battery capacity of 200 Amp-hours is recommended for optimal performance.
Image 4.1: Battery Compatibility. This image shows the Anern Solar Inverter's compatibility with multiple battery types, including AGM, GEL, FLD, SLD, and LiFePO4 batteries.
4.3 Configurazione doppia uscita CA
The inverter features two AC output terminals: a primary output and a secondary output. Under normal operating conditions, both outputs are active. In scenarios where there is no PV or grid power, and the battery voltage is low, the primary output will shut down, and only the secondary output will remain active to conserve energy. The secondary output can be configured based on voltage, output duration, and battery State of Charge (SOC).
Image 4.2: Single PV Input Dual AC Output. This diagram illustrates the inverter's capability to provide dual AC outputs from a single PV input. It shows how the primary output can power larger appliances like an air conditioner and refrigerator, while the secondary output can power smaller devices like a laptop, especially when the battery is low.
4.4 EsampScenario di installazione
Image 4.3: Application Scenarios. Questa immagine mostra un example installation of multiple Anern inverters and battery units in a wall-mounted setup, demonstrating a typical application scenario for the hybrid solar inverter system.
5. Istruzioni per l'uso
5.1 Sequenza di avvio
Follow these steps to safely start the inverter system:
- Accendere l'interruttore della batteria.
- Avviare l'inverter.
- Turn on the photovoltaic (PV) switch.
- Turn on the AC grid switch (if connected).
- Accendere gli interruttori di carico.
Nota: For electrical appliances with inductive loads (e.g., motors, refrigerators), the startup power requirement can be at least three times their nominal power. Ensure the inverter's capacity can handle these surge loads.
5.2 Sequenza di spegnimento
To safely shut down the inverter system, follow the startup sequence in reverse order:
- Spegnere gli interruttori di carico.
- Turn off the AC grid switch (if connected).
- Turn off the photovoltaic (PV) switch.
- Spegnere l'inverter.
- Spegnere l'interruttore della batteria.
5.3 Impostazioni configurabili
The inverter's LCD display allows configuration of various parameters to optimize performance for specific applications:
- Ingresso volumetage Gamma: Configurable for home appliances or personal computers.
- Corrente di carica della batteria: Adjustable based on battery type and capacity.
- AC/Solar Charge Priority: Configurable to prioritize charging from solar or AC grid.
5.4 Operating Modes for Charging
The inverter supports different charging priority modes to maximize energy efficiency:
- Solar First: Solar energy is the primary source for charging the battery. Utility power will only charge the battery if solar energy is unavailable.
- Solare e servizi di pubblica utilità: Both solar energy and utility power will charge the battery simultaneously.
- Solo ricarica solare: Solar energy will be the sole charging source, regardless of utility availability.
Image 5.1: Cost-Efficient Energy Management. This image illustrates three operational modes for the inverter: 'Solar First' (solar energy prioritised for charging), 'Solar and Utility' (both sources charge simultaneously), and 'Only Solar Charging' (solar is the exclusive charging source).
5.5 Modalità senza batteria
The inverter can operate in a batteryless mode, directly powering loads from photovoltaic (PV) or AC sources without requiring a connected battery. This feature simplifies installation and offers flexibility in certain applications.
Image 5.2: Support Batteryless Mode. This image explains that the inverter can power loads directly from PV or AC sources without a battery, highlighting 'No batteries required', 'Direct photovoltaic supply', and 'Plug and Play' benefits. It also contrasts simple plug-and-play wiring with complex, cumbersome maintenance wiring.
6. Manutenzione
Una manutenzione regolare garantisce la longevità e le prestazioni ottimali del vostro inverter. Scollegate sempre tutte le fonti di alimentazione prima di eseguire qualsiasi intervento di manutenzione.
- Pulizia: Periodically clean the inverter's exterior with a dry, soft cloth. Ensure ventilation openings are free from dust and debris.
- Connessioni: Check all electrical connections regularly for tightness and signs of corrosion. Tighten any loose connections.
- Ambiente: Ensure the inverter is operating within its specified temperature and humidity ranges. Avoid exposure to direct sunlight, moisture, and corrosive substances.
- Ispezione della batteria: If using batteries, regularly inspect them for any signs of damage, leakage, or swelling. Follow battery manufacturer's maintenance guidelines.
7. Risoluzione Dei Problemi
The inverter is equipped with multi-layered protection features to ensure safe operation. If an issue occurs, the LCD display may show an error code or the RGB indicator may signal a specific status. Refer to the following for common issues:
Image 7.1: Multi-layered Protection. This image highlights the comprehensive 360° protection features of the inverter, including short circuit, overload, under voltage, oltre voltage, over current, over temperature, backfill, and over charge protection.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna potenza in uscita | Inverter off, low battery, overload, short circuit | Controllare l'interruttore di alimentazione, il volume della batteriatage, reduce load, check for short circuits. |
| Avviso di sovraccarico/arresto | Il carico collegato supera la capacità dell'inverter | Reduce the connected load. Ensure inductive loads do not exceed surge capacity. |
| Avviso di sovratemperatura | Insufficient ventilation, high ambient temperature | Ensure proper airflow, clear obstructions, move to a cooler environment if necessary. |
| Batteria non in carica | PV input issue, AC input issue, battery fault, incorrect settings | Check PV connections, AC input, battery health, and charging priority settings on LCD. |
| L'inverter non si accende | No battery connection, battery voltage too low, internal fault | Check battery connections, ensure battery is charged, contact support if issue persists. |
8. Specifiche
| Parametro | Valore |
|---|---|
| Marca | Anern |
| Numero di modello | AN-FGI-S5000 |
| Potenza nominale | 5000 L |
| Potenza di uscita massima | 12000 L |
| Ingresso CC Voltage | 24 Volt |
| Volume di uscita CAtage | 220-240 V |
| Forma d'onda di uscita | Onda sinusoidale pura |
| Frequenza di uscita | 50 Hz / 60 Hz (configurabile) |
| Corrente del regolatore di carica MPPT | 160 A |
| Massima potenza FV in ingresso | 9000 L |
| FV Operativo Voltage Gamma | 60-450 V DC |
| Max No-Load PV Voltage | 500 V CC |
| Capacità della batteria consigliata | ≥ 200 Ah (24V) |
| Usi consigliati | Ufficio, Casa, Veicolo |
| Paese di origine | Cina |
9. Garanzia e supporto
Information regarding specific warranty terms and conditions for the Anern 5000W 24V Hybrid Solar Inverter is not available in the provided product details. For warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly through their official channels. Ensure you have your product model number (AN-FGI-S5000) and purchase details ready when contacting support.
10. Video ufficiali dei prodotti
No official seller videos were provided in the product data for this model. Please refer to the manufacturer's websito o canali ufficiali per tutte le risorse video disponibili.
