Richmat HJA35 Hall Leg Actuator Instruction Manual

1. Prodotto finitoview

The Richmat HJA35 Hall Leg Actuator is a replacement component designed for adjustable bed bases. This actuator is responsible for the movement of the bed's leg section, enabling users to adjust the bed's position for comfort. It features an 8-pin power connector and specific stroke dimensions for compatibility with various adjustable bed models.

Immagine 1.1: The Richmat HJA35 Hall Leg Actuator. This image displays the complete actuator unit, including the motor, linear shaft, and attached power cable with its 8-pin connector.

Caratteristiche principali:

• Model: HJA35 Hall
• Connettore di alimentazione: 8 pin
• Stroke/Installation Length: 115/303mm
• Designed for adjustable bed bases

2. Controllo di compatibilità

Before installing the HJA35 actuator, it is crucial to verify its compatibility with your existing adjustable bed base. Please ensure that your current actuator is also a Richmat HJA35 Hall model and that the power connector matches the 8-pin configuration shown below.

Immagine 2.1: Product label on the Richmat HJA35 actuator. This label provides essential information such as the item number (HJA35 HALL), rated voltage (DC 24V, 3A), maximum push force (6000N), stroke/installation length (115/303mm), and duty cycle (10%, Max 2min ON/18min OFF).

Immagine 2.2: Close-up of the 8-pin power connector. This image shows the specific pin configuration of the connector, which must match your bed base's receptacle for proper connection.

Refer to the label on your existing actuator for model number verification. If the model number or connector type differs, this replacement part may not be compatible.

3. Configurazione e installazione

La sicurezza prima di tutto: Always unplug your adjustable bed base from the power outlet before attempting any installation or replacement procedures to prevent electrical shock or injury.

Fasi di installazione:

1. Scollegare l'alimentazione: Unplug the adjustable bed base from the wall outlet.
2. Locate Actuator: Identify the actuator responsible for the leg section movement. It is typically mounted to the bed frame.
3. Rimuovere il vecchio attuatore:
   • Carefully disconnect the 8-pin power cable from the control box.
   • Unbolt or unclip the old actuator from its mounting points on the bed frame. Note the orientation for reinstallation.
4. Installare il nuovo attuatore:
   • Position the new HJA35 actuator in the same orientation as the old one.
   • Securely attach the actuator to the bed frame using the original bolts or clips. Ensure all connections are tight.
   • Connect the 8-pin power cable of the new actuator to the corresponding port on the bed's control box. Ensure the connection is firm and fully seated.
5. Funzionalità di prova:
   • Plug the adjustable bed base back into the power outlet.
   • Using your bed's remote control, test the leg section's up and down movement to ensure the new actuator is functioning correctly and smoothly.

If you encounter any difficulties or are unsure about any step, consult a qualified technician or the bed base manufacturer's support.

4. Istruzioni per l'uso

The Richmat HJA35 Hall Leg Actuator operates in conjunction with your adjustable bed base's control system and remote. Once installed, its operation is seamless and integrated with the bed's standard functions.

Funzionamento di base:

• Use the designated buttons on your adjustable bed's remote control to raise or lower the leg section.
• The actuator will extend or retract, moving the bed frame to the desired position.
• Rilasciare il pulsante quando viene raggiunta la posizione desiderata.

Importante: Do not exceed the weight capacity of your adjustable bed base. Avoid placing objects or body parts in the moving mechanisms of the bed while it is operating.

5. Manutenzione

The Richmat HJA35 Hall Leg Actuator is designed for minimal maintenance. Regular inspection can help ensure its longevity and proper function.

Suggerimenti per la Manutenzione:

• Ispezione regolare: Periodically check the actuator and its mounting points for any signs of wear, loose bolts, or damage.
• Controllo del cavo: Ensure the power cable is not pinched, frayed, or damaged. Keep it clear of moving parts.
• Pulizia: Se necessario, pulire delicatamente l'esterno dell'attuatore con un panno asciutto o leggermente asciutto.amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the motor housing.
• Lubrificazione: The actuator is factory-lubricated and generally does not require additional lubrication. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.

Ciclo di lavoro: Note the specified duty cycle of 10% (Max 2min ON/18min OFF). This means the actuator should not be operated continuously for more than 2 minutes, followed by an 18-minute rest period. Exceeding the duty cycle can lead to overheating and premature failure.

6. Risoluzione Dei Problemi

If your adjustable bed's leg section is not functioning correctly after installing the HJA35 actuator, refer to the following troubleshooting guide:

For problems not listed here, or if solutions do not resolve the issue, contact the manufacturer or seller for further assistance.

7. Specifiche

• Modello: HJA35 Hall
• Volume nominaletage: DC 24V, 3A
• Max Push: 6000N
• Stroke/Installation Length: 115/303mm
• Ciclo di lavoro: 10% (Max 2min ON / 18min OFF)
• Tipo di connettore: 8 pin
• Classe di protezione: Grado di protezione IP20

8. Garanzia e supporto

For information regarding the warranty of your Richmat HJA35 Hall Leg Actuator, please refer to the documentation provided with your original purchase or contact the seller directly. Warranty terms may vary based on the retailer and region.

If you require technical support or have questions about the installation or operation of this actuator, please contact the Richmat customer service or the retailer from whom you purchased the product. Provide your product model number (HJA35) and purchase details when seeking support.