Ortis Above Ground Smart Pool Timer

1. Introduzione

Thank you for choosing the Ortis Above Ground Smart Pool Timer. This device is designed to automate the operation of your pool pump and salt system, enhancing energy efficiency and simplifying your pool maintenance routine. Featuring dual waterproof outlets, a clear LCD display, and flexible timing functions, this timer is built for reliable outdoor performance. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.

2. Informazioni sulla sicurezza

• Sicurezza elettrica: Always ensure the timer is connected to a properly grounded outlet. Do not immerse the timer in water.
• Carico massimo: The total current for all connected appliances must not exceed 15 Amperes (15A). Overloading can cause damage to the timer and connected devices, and poses a fire hazard.
• Uso esterno: This timer is designed for outdoor use and features waterproof outlets. However, ensure all connections are secure and protected from direct water spray.
• Disconnessione: Disconnect power before performing any maintenance or when the timer is not in use for extended periods.
• Bambini: Tenere fuori dalla portata dei bambini. Questo non è un giocattolo.
• Danno: Do not operate the timer if the cord, plug, or housing is damaged. Contact customer support for assistance.

3. Contenuto della confezione

Si prega di controllare la confezione per verificare la presenza dei seguenti elementi:

• Ortis Above Ground Smart Pool Timer (Model KJ-139)
• Manuale di istruzioni

4. Prodotto finitoview

Familiarize yourself with the components of your Ortis Smart Pool Timer.

Figura 4.1: Davanti view of the Ortis Smart Pool Timer, showing the LCD display, control buttons, and dual outlets (S1 and S2).

4.1. componenti

• Schermo LCD: Shows current time, mode, and operational status.
• (M) Pulsante Modalità: Cycles through different operating modes (Countdown, 24H Auto Cycle).
• (T) Time Button: Usato per impostare l'ora corrente.
• (^) Up Button: Regola i valori verso l'alto.
• (V) Down Button: Regola i valori verso il basso.
• Pulsante di blocco: Locks/unlocks the display to prevent accidental changes.
• (Manual) Button: Manually turns outlets S1/S2 ON or OFF.
• (Time ON) Button: Used in 24H Auto Cycle mode to set ON times.
• (Pulsante di accensione: Turns the timer unit ON/OFF.
• S1 & S2 Outlets: Dual waterproof outlets for connecting appliances.
• Cavo di alimentazione: Connects the timer to a wall outlet.

Figura 4.2: Dettagliato view of the LCD screen, showing time, mode, and status indicators.

Figura 4.3: View of the waterproof outlet covers, designed for outdoor protection.

5. Impostazione

5.1. Montaggio del timer

1. Choose a suitable location near your pool or water feature, ensuring it is within reach of a grounded outdoor power outlet and your appliances.
2. Mount the timer securely to a wall or sturdy post using appropriate screws (not included). Ensure it is at a height that allows for easy access to the display and buttons, and that the outlets face downwards to prevent water ingress.

Figura 5.1: The timer mounted on a wall, positioned for convenient access near a pool.

5.2. Collegamento all'alimentazione

1. Plug the timer's power cord into a grounded 120V AC outdoor electrical outlet.
2. The LCD display should illuminate. If not, press the Power button.

5.3. Collegamento degli elettrodomestici

1. Open the waterproof covers for outlets S1 and S2.
2. Plug your pool pump into one outlet (e.g., S1) and your salt system or other appliance into the other outlet (e.g., S2).
3. Ensure the total current draw of all connected appliances does not exceed 15A.
4. Close the waterproof covers securely around the appliance plugs to maintain weather resistance.

Figura 5.2: The timer with a pool pump and salt chlorinator connected to its dual outlets.

6. Istruzioni per l'uso

6.1. Impostazione dell'ora corrente

1. Premere e tenere premuto il tasto (T) Time finché le cifre dell'ora non lampeggiano.
2. Utilizzare il (^) Up E (V) Down pulsanti per regolare l'ora. Prestare attenzione a AM/PM.
3. Premere il tasto (T) Time nuovamente il pulsante per passare alla regolazione dei minuti. Utilizzare (^) Up E (V) Down per impostare i minuti.
4. Premere il tasto (T) Time button one more time to confirm and exit time setting.

6.2. Modalità conto alla rovescia

This mode allows you to set a specific duration for the connected appliances to run before automatically turning off.

1. Premere il tasto (M) Modalità button until "COUNTDOWN CYCLE MODE" appears on the display.
2. The hour digits for the countdown will flash. Use the (^) Up E (V) Down buttons to set the desired running hours.
3. Premere il tasto (M) Modalità nuovamente il pulsante per passare alla regolazione dei minuti. Utilizzare (^) Up E (V) Down to set the desired running minutes.
4. Premere il tasto (M) Modalità button once more to confirm the countdown duration.
5. The timer will now display the countdown. The connected appliances will turn ON and run for the set duration, then turn OFF automatically.

6.3. 24H Auto Cycle Mode

This mode allows you to program daily ON/OFF schedules for your appliances.

1. Premere il tasto (M) Modalità button until "24H AUTO CYCLE MODE" appears on the display.
2. Premere il tasto (Time ON) button to enter program setting. The display will show "1 ON".
3. Utilizzare il (^) Up E (V) Down pulsanti per impostare l'ora di accensione desiderata (ora e minuti). Premere (Time ON) per passare dall'ora ai minuti.
4. After setting the ON time, press (Time ON) di nuovo. Il display mostrerà "1 OFF".
5. Utilizzare il (^) Up E (V) Down buttons to set the desired OFF time (hour and minute). Press (Time ON) per passare dall'ora ai minuti.
6. You can set multiple ON/OFF programs (e.g., 2 ON, 2 OFF, etc.) by repeating steps 3-5. The timer supports multiple programs.
7. Once all programs are set, press the (M) Modalità button to exit program setting and activate the 24H Auto Cycle mode. The timer will now follow your programmed schedule daily.

6.4. Azionamento manuale

To manually turn the connected appliances ON or OFF, regardless of the programmed schedule:

• Premere il tasto (Manuale) button. Each press will cycle through ON, OFF, and AUTO modes for the outlets.
• In AUTO mode, the timer will follow the programmed schedule.

6.5. Funzione di blocco

Per evitare modifiche accidentali alle impostazioni:

• Premere e tenere premuto il tasto Serratura button for approximately 3 seconds to lock the keypad. A lock icon will appear on the display.
• Repeat the action to unlock the keypad. The lock icon will disappear.

7. Manutenzione

• Pulizia: Disconnect the timer from power before cleaning. Wipe the exterior with a soft, damp panno. Non usare detergenti abrasivi o solventi.
• Ispezione: Regularly inspect the power cord, plug, and outlets for any signs of damage or wear. Ensure waterproof covers are intact and properly sealed.
• Magazzinaggio: If storing the timer for an extended period, disconnect it from power, clean it, and store it in a dry, cool place away from direct sunlight.

8. Risoluzione Dei Problemi

9. Specifiche

• Modello: Modello KJ-139
• Ingresso volumetage: 120V AC 60Hz
• Carico massimo: 15 A / 1800 W.
• Punti vendita: 2 prese di terra
• Modalità operative: Countdown, 24H Auto Cycle, Manual
• Display: LCD
• Dimensioni (A x L x P): Circa 4.9" x 3.3" x 3.9"
• Lunghezza del cavo di alimentazione: Circa 4.7 piedi
• Valutazione ambientale: Outdoor Rated, Waterproof Outlets

Figura 9.1: Product dimensions of the Ortis Smart Pool Timer.

10. Garanzia e supporto

10.1. Informazioni sulla garanzia

Ortis products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, improper installation, unauthorized repairs, or natural disasters.

10.2. Assistenza clienti

If you have any questions, require assistance with setup, or encounter any issues not covered in this manual, please contact Ortis customer support. Refer to the product packaging or the Ortis brand store on Amazon for contact details.