ChongXiao Universal Brushless Controller Instruction Manual

1. Prodotto finitoview

The ChongXiao Universal Brushless Controller is an electronic device designed for brushless motors, enabling precise control over speed and direction. This controller supports a wide range of voltages from 36V to 84V and current limits from 40A to 50A, suitable for motors with power ratings between 1500W and 2500W. Its brushless design ensures smooth operation, enhanced stability, and extended lifespan.

This controller is compatible with various brushless motor brands and models, offering versatility for different user requirements. It incorporates advanced technology to deliver reliable performance and durability.

2. Specifiche

Key technical specifications for the controller are detailed below:

3. Configurazione e installazione

Follow these steps carefully to connect your brushless controller. Refer to the wiring diagram (Figure 4) for visual guidance.

1. Connect Motor Phase Lines: Connect the motor phase lines to the controller, ensuring color-to-color matching. (Refer to connection 16 in Figure 4).
2. Connect Battery Line: Connect the battery line to the controller. The red wire is for battery positive (+), and the black wire is for battery negative (-). (Refer to connection 17 in Figure 4).
3. Connect Throttle and Electric Door Lock: Connect the controller's throttle wires to the throttle, matching colors. If your throttle does not have an electric door lock, the two electric door lock wires from the controller must be shorted together. (Refer to connection 11 for speed control handle/throttle and connection 9 for electric door lock in Figure 4).
4. Connect Hall Line (Optional): Connect the Hall sensor lines, matching colors. If your motor does not have Hall wires, this connection is not required. The controller can operate without Hall wires, though the motor may produce some noise. (Refer to connection 4 for Hall wires in Figure 4).
5. Intelligent Recognition (Self-Learning) Procedure:
   • Assicurarsi che l'alimentazione sia DISATTIVATA.
   • Connect the two intelligent recognition lines together (Refer to connection 3 in Figure 4).
   • Turn the power ON. The wheel will begin to rotate, either forward or reverse.
   • If the wheel rotates inoltrare, separate the intelligent recognition lines.
   • If the wheel rotates inversione, separate the intelligent recognition lines, then immediately connect them together again. The wheel should now rotate forward. Once it rotates forward, separate the intelligent recognition lines.
   • Importante: This intelligent recognition step must be completed within 2 minutes after turning on the power. If the timeout occurs, turn off the power, then turn it back on and repeat these steps.
   • Nota: When using the throttle for operation, the intelligent recognition lines must be separated.
6. Connect Other Functions: Connect any other desired functions as needed, such as cruise, pedal assist (PAS), meters, or anti-theft alarms. (Refer to Figure 4 for connections 1, 2, 5, 6, 7, 8, 10, 12, 13, 14, 15).

4. Funzioni operative

The controller supports the following functions:

• Hall Sensor (5 wires): For motors equipped with Hall sensors.
• Controllo della velocità di crociera: Mantiene una velocità impostata.
• Hall Meter: Provides speed or distance data via Hall sensors.
• Intelligent Recognition (Self-Learning): Automatic motor parameter identification.
• High Level Brake: Brake signal input.
• Phase Meter: Provides motor phase data.
• PAS (Sistema di pedalata assistita): Assists motor power based on pedal input.
• Funzione inversa: Allows the motor to operate in reverse.
• Multiple Data Meter: Supports various data displays.
• Low Level Brake: Alternative brake signal input.
• Speed Control Handle (Throttle): Controls motor speed.
• Serratura elettrica della porta: Power control for the system.
• Three Speed Gear: Consente la selezione di diverse modalità di velocità.
• Anti-theft Alarm Signal: Output for an alarm system.
• Anti-theft Alarm Power: Power supply for an alarm system.

5. Manutenzione

To ensure optimal performance and longevity of your controller, consider the following maintenance guidelines:

• Mantenere pulito: Regularly clean the exterior of the controller to prevent dust and debris accumulation, which can affect heat dissipation.
• Controllare le connessioni: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.
• Evitare l'esposizione all'acqua: While the controller is designed for outdoor use, prolonged exposure to heavy rain or submersion in water should be avoided to prevent internal damage.
• Gestione della temperatura: Ensure the controller is mounted in a location with adequate airflow to prevent overheating, especially during high-power operation.

6. Risoluzione Dei Problemi

Se riscontri problemi con il controller, prova a seguire i seguenti passaggi di base per la risoluzione dei problemi:

• Nessun potere: Check the battery connection and ensure the electric door lock wires are correctly connected or shorted if applicable. Verify battery charge level.
• Motore non in funzione:
  • Confirm all motor phase lines are securely connected.
  • Perform the intelligent recognition (self-learning) procedure again.
  • Check Hall sensor connections if your motor uses them.
  • Assicurarsi che l'acceleratore funzioni correttamente.
• Motor Runs with Noise (without Hall wires): This is normal behavior if the motor does not have Hall wires and they are not connected.
• Funzionamento intermittente: Ispezionare tutti i cavi per verificare che non vi siano collegamenti allentati o isolamento danneggiato.

Se questi passaggi non risolvono il problema, contattare l'assistenza clienti per ulteriore assistenza.

7. Informazioni sulla garanzia

According to the product specifications, this controller does not include a manufacturer's warranty.

8. Supporto

For technical support, inquiries, or assistance with your ChongXiao Universal Brushless Controller, please refer to the seller's contact information or the platform where the product was purchased. Ensure you have your product model number and purchase details available when contacting support.