Manuali e guide utente Synapse

synapse DIM10-087-06-A Controller incorporato AVVERTENZE E PRECAUZIONI: PER EVITARE INCENDI, SCOSSE ELETTRICHE O MORTE: SPEGNERE L'ALIMENTAZIONE TRAMITE L'INTERRUTTORE AUTOMATICO O IL FUSIBILE E VERIFICARE CHE L'ALIMENTAZIONE SIA DISATTIVATA PRIMA DELL'INSTALLAZIONE!…

synapse DIM10-087-06-FW Controller Cut Sheet Installation Guide INSTALLATION GUIDE SPECIFICATIONS Dim Control Max Load: 30 mA Source/Sink Radio Frequency: 2.4 GHz (IEEE 802.15.4) RF Transmission Output Power: +20dBM Operating Temperature:…

Synapse DIM10-087-06 Controller Cut Sheet WARNING AND CAUTIONS TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE INSTALLING!…

Synapse EMB-S2 Controller WARNING AND CAUTIONS TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE INSTALLING! PROPER GROUNDING…

Synapse Bridge 485 Wireless Sensor Interface DESCRIPTION The Bridge 485 works in conjunction with other SimplySnap nodes to provide access to devices that utilize the MODBUS RTU protocol over a…

synapse ANT-OSB-1.5-1 Hanging Pole Kit Hanging Pole Kit Installation Guide WARNINGS AND CAUTIONS: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT…

synapse EMB-S2-FW Controller Instruction Manual SPECIFICATIONS Dim Control Max Load: 30 mA Source/Sink Radio Frequency: 2.4 GHz (IEEE 802.15.4) RF Transmission Output Power: +19dBM Operating Temperature: -40 to +80 C…

synapse EMB-S2-A Controller EMB-S2-A Controller Load Ratings: 12 to 24VDC, +/-10%, 700mW max Operating Temperature: -40 to +80 C / Operating Humidity: 10 to 90%, non-condensing WARNING AND CAUTIONS: TO…

Synapse ZHA-S1 Wireless Releases Twist Lock Zhaga Controllers for Intelligent LED Luminaire Control DESCRIPTION The Zhaga Controller provides wireless control of LED fixtures that have DALI-2 LED drivers and standard…

Synapse Control-485 Controller for Thermostats Instruction Manual WARNINGS AND CAUTIONS: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF…