Logo MICROCHIPMICROCHIP MPF050T PolarFire FPGA Integrated Circuits

PolarFire® FPGA Production

Introduzione

The PolarFire® MPF050T, MPF100T, MPF200T, MPF300T, and MPF500T production FPGA devices are subject to the limitations described in this document. This document describes updates about known issues, available limitations, and workarounds. It provides a snapshot of the current validation status for feature sets. The document highlights dependencies that may exist between silicon device revisions and specific support by Libero®  SoC software versions. Contact Supporto tecnico Microchip per ulteriori informazioni.
Table 1. Device Revisions

Dispositivo Pacchetto Revisioni
MPF050T, TL, TS, TLS, TC FCSG325 and FCVG484 0, 1
MPF100T, TL, TS, TLS, TC FCG484, FCVG484, and FCSG325 0, 1, 2
MPF200T, TL, TS, TLS, TC FCG784, FCG484, FCVG484, FCSG536, and FCSG325 0, 1, 2
MPF300T, TL, TS, TLS, TC FCG1152, FCG784, FCG484, FCVG484, and FCSG536 0, 1, 2
MPF500T, TL, TS, TLS, TC FCG1152 and FCG784 0, 1

Nota: Vedere CN19014 for details on revision 1 devices.
Table 2. Device Options

Dispositivo Extended Commercial 0 °C–100 °C Industrial –40 °C–100 °C Malattia sessualmente trasmissibile –1 Transceivers T Lower Static Power L Data Security S
MPF050T, MPF100T, MPF200T, MPF300T, MPF500T
MPF050TL, MPF100TL, MPF200TL, MPF300TL, MPF500TL
MPF050TS, MPF100TS, MPF200TS, MPF300TS, MPF500TS
MPF050TLS, MPF100TLS, MPF200TLS, MPF300TLS, MPF500TLS
MPF050TC, MPF100TC, MPF200TC, MPF300TC, MPF500TC NO

For specifications, see PolarFire FPGA Datasheet.

Errata Descriptions and Workaround

The following sections describe device errata and workarounds wherever applicable. This document is intended to describe variations or deviations from information in the PolarFire FPGA Datasheet or any PolarFire user or demo guide.
The following table lists the specific device errata and the affected PolarFire production devices.
Table 1-1. Summary of PolarFire FPGA Errata

Descrizione MPF050T, TL, TS, TLS, TC MPF100T, TL, TS, TLS, TC MPF200T, TL, TS, TLS, TC MPF300T, TL, TS, TLS, TC MPF500T, TL, TS, TLS, TC
MPF300T-ES bitstream compatibility N / A N / A N / A * N / A
System controller suspend mode interaction with JTAG * * * * *
PCIe SECDED ECC reporting counters and interrupts * * * * *
External VERIFY_DIGEST with POR Digest Check for Fabric Components * * * * *

* indicates that the errata exists for that particular device. Details are discussed in the following
sezioni.
For feature clarifications about supported transceiver protocols, see the section Supported Transceiver Protocol Status for Production Devices.
1.1. Bitstream Compatibility
MPF300T-ES bitstreams cannot be used to program pre-production (PP) or production MPF300T devices.
1.2. System Controller Suspend Mode Interaction with JTAG
If the system controller’s suspend mode is enabled, device initialization may be interrupted after exiting JTAG programming. As a workaround, reset the device after JTAG programmazione.
1.3. PCIe® SECDED Reporting Defeatured
When ECC is enabled (default) within the PCIe hard IP block, the single error correction and double error detection error reporting counters and interrupt registers show erroneous values.
The following features of the PCIe SECDED are being defeatured:

  • Single error correction reporting features
  • Double error detection feature

More information about this is available in the change impact analysis document.
1.4. Deprecated Feature: Use of External VERIFY_DIGEST with POR Digest Check for Fabric Components
When the device is configured for Fabric Power-On-Reset (POR) digest check, VERIFY_DIGEST of fabric components via JTAG/SPI may report false failures and is deprecated. This issue does not affect:

  • VERIFY_DIGEST of non-fabric components
  • CHECK_DIGEST via system service call
  • VERIFY_DIGEST functionality for fabric components when Fabric POR digest check is disabled

For more information, refer to the latest revision of the PolarFire Family FPGA Security User Guide.

Supported Transceiver Protocol Status for Production Devices

Transceiver protocol capabilities are validated and tested for robustness as per the specifications listed in the PolarFire FPGA Datasheet and PolarFire Family Transceiver User Guide.
The following table summarizes transceiver protocols and validation status for production devices.
This table does not apply to PolarFire core devices (MPFxxxTC).
Table 2-1. Supported Transceiver Protocols

Transceiver Protocol by Device MPF050T/MPF100T/ MPF200T/MPF300T/
MPF500T Status
Dettagli
SGMII/1000BASE-X Completare Transceiver: 1.25 Gbps with CoreTSE IP core.
TxPLL SyncE validation is in progress. Contact the factory.
CPRI Completare Support for CPRI data rates 1–7 and 7A, 8, 9.
10GBASE-R Completare Transceiver: 10.3125 Gbps with Core10GMAC IP core. TxPLL SyncE is supported.
IEEE® 1588 time stamping non è supportato.
10GBASE-KR Completare Contact Microchip for a complete solution.
Interlaken Completare
JESD204B Completare Up to 12.5G with CoreJESD20BTX/RX IP core.
PCIE Endpoint Gen1/Gen2 Completare
PCIE Rootport Gen1/Gen2 Completare
LiteFast Completare Up to 12.7 Gbps (8b10b only).
XAUI Completare
RXAUI Completare
HiGig/HiGig+ Completare
Porta di visualizzazione Completare Per VESA DisplayPort Standard 1.2a.
SRIO Completare
PMA only Completare
SATA Completare Contattare la fabbrica.
Fiber channel Completare Tested for electrical compliance.
SDI Completare HD-SDI (1.485 Gbps) and 3G-SDI (2.970 Gbps) are supported. SD-SDI (270 Mbps) is supported.
6G-SDI and 12G-SDI are supported.
OTN Completare Tested for electrical compliance.
QSGMII Completare
USXGMII Completare
CoaXPress Completare Tested with external PHY.
SLVS-EC Completare
Half-duplex (independent Rx/Tx) Completare

Cronologia delle revisioni

La cronologia delle revisioni descrive le modifiche implementate nel documento. I cambiamenti
sono elencati per revisione, a partire dalla pubblicazione più recente.

Revisione Data Descrizione
B 08/2025 •  Added MPF050T and TC information throughout the document.
• Aggiornato Table 1. Device Revisions.
Deprecated Feature: Use of External VERIFY_DIGEST with POR Digest Check for Fabric Componenti.
• Noted that Table 2-1. Supported Transceiver Protocols does not apply to PolarFire core devices (MPFxxxTC).
A 01/2024 • Defeatured PCIe SECDED reporting. More information about this is available in the change impact analysis document.
• Added references to MPF050T in Riassunto Errata E Supported Transceiver Protocols.
• Updated to Microchip template.
• Updated document number from ER0218 to DS80001111.
6.0 05/2021 • Updated details for SGMII/1000BASE-X row in Table 4 Supported Transceiver Protocols.
5.0 12/2020 • Removed information for “Dynamic Training of HSIO/GPIO IOD Interfaces” and “Temperature-Voltage Sensor (TVS) Temperature Flags Values”.
• Updated status for SDI, SLVS-EC, and Half-duplex (independent Rx/Tx) to “Complete”.
• “SD-SDI (270 Mbps)” and “6G-SDI and 12G-SDI” are supported.
• Deleted “Enhanced Receiver Management (ERM) is not supported”.
4.0 12/2019 • Removed MIPI D-PHY support information. For MIPI D-PHY support information, see the PolarFire Datasheet Revision 1.7.
• Added Temperature-Voltage Sensor (TVS) information (per CN19030).
• Added system control suspend mode interaction with JTAG.
3.0 09/2019 • Removed memory interface limitation from errata for production silicon using Libero SoC version 12.0 or later software.
• Removed IOCDR limitations from errata for production silicon using Libero SoC version 12.1 or later software.
• Removed RxPLL behavior and DFE calibration limitations from errata for production silicon using Libero SoC version 12.1 or later software using PF_XCVR_ERM core.
• Removed errata on the IBIS-AMI DFE support. The released IBIS-AMI models offer full feature support.
2.0 11/2018 • MPF100T device offerings were added.
1.0 11/2018 •  It was the first publication of this document, including the MPF200T and MPF300T device offerings.

Informazioni sul microchip

Marchi
Il nome e il logo "Microchip", il logo "M" e altri nomi, loghi e marchi sono marchi registrati e non registrati di Microchip Technology Incorporated o delle sue affiliate e/o sussidiarie negli Stati Uniti e/o in altri paesi ("Marchi Microchip"). Le informazioni relative ai Marchi Microchip sono disponibili all'indirizzo https://www.microchip.com/en-us/about/legalinformation/microchip-trademarks.
ISBN: 979-8-3371-1825-3
Note legali
Questa pubblicazione e le informazioni in essa contenute possono essere utilizzate esclusivamente con prodotti Microchip, anche per progettare, testare e integrare i prodotti Microchip nella vostra applicazione. L'utilizzo di queste informazioni in qualsiasi altro modo viola i presenti termini. Le informazioni relative alle applicazioni dei dispositivi sono fornite solo per vostra comodità e potrebbero essere sostituite da aggiornamenti. È vostra responsabilità garantire che la vostra applicazione soddisfi le vostre specifiche. Contattate l'ufficio vendite Microchip locale per ulteriore supporto o richiedete ulteriore supporto all'indirizzo www.microchip.com/en-us/support/design-help/client-support-services.
QUESTE INFORMAZIONI SONO FORNITE DA MICROCHIP "COSÌ COME SONO". MICROCHIP NON RILASCIA ALCUNA DICHIARAZIONE O GARANZIA DI ALCUN TIPO, ESPRESSA O IMPLICITA, SCRITTA O ORALE, LEGALE O DI ALTRO TIPO, RELATIVA ALLE INFORMAZIONI, INCLUSE, A TITOLO ESEMPLIFICATIVO MA NON ESAUSTIVO, QUALSIASI GARANZIA IMPLICITA DI NON VIOLAZIONE, COMMERCIABILITÀ E IDONEITÀ PER UNO SCOPO PARTICOLARE, O GARANZIE RELATIVE ALLA SUA CONDIZIONE, QUALITÀ O PRESTAZIONI.
IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL LOSS, DAMAGE, COST, OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE INFORMATION OR ITS USE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE POSSIBILITY OF THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP’S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY RELATED TO THE INFORMATION OR ITS USE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THE INFORMATION.
L'uso dei dispositivi Microchip in applicazioni di supporto vitale e/o di sicurezza è interamente a rischio dell'acquirente, e l'acquirente si impegna a difendere, indennizzare e tenere indenne Microchip da tutti i danni, reclami, azioni legali o spese derivanti da tale utilizzo. Nessuna licenza viene concessa, implicitamente o in altro modo, ai sensi dei diritti di proprietà intellettuale di Microchip, salvo diversa indicazione.
Funzionalità di protezione del codice dei dispositivi a microchip
Si noti quanto segue in merito alla funzionalità di protezione del codice sui prodotti Microchip:

  • I prodotti Microchip soddisfano le specifiche contenute nella rispettiva scheda tecnica Microchip.
  • Microchip ritiene che la sua famiglia di prodotti sia sicura se utilizzata nel modo previsto, nel rispetto delle specifiche operative e in condizioni normali.
  • Microchip valorizza e protegge in modo aggressivo i propri diritti di proprietà intellettuale. I tentativi di violare le funzionalità di protezione del codice dei prodotti Microchip sono severamente vietati e potrebbero violare il Digital Millennium Copyright Act.
  • Né Microchip né alcun altro produttore di semiconduttori può garantire la sicurezza del suo codice. La protezione del codice non significa che stiamo garantendo che il prodotto sia "indistruttibile". La protezione del codice è in continua evoluzione. Microchip si impegna a migliorare costantemente le funzionalità di protezione del codice dei nostri prodotti.

Logo MICROCHIP errore di stampa
© 2024-2025 Microchip Technology
Inc. and its subsidiaries

Documenti / Risorse

MICROCHIP MPF050T PolarFire FPGA Integrated Circuits [pdf] Guida utente
MPF050T, MPF050T PolarFire FPGA Integrated Circuits, PolarFire FPGA Integrated Circuits, FPGA Integrated Circuits, Integrated Circuits

Riferimenti

Lascia un commento

Il tuo indirizzo email non verrà pubblicato. I campi obbligatori sono contrassegnati *