1. Introduzione
This instruction manual provides detailed guidance for installing and using the TWO TREES Laser Engraver Frame Upgrade Kit. This kit is designed to expand the working area of compatible TWO TREES laser engravers, allowing for larger engraving projects. Please read this manual thoroughly before beginning installation.
Image: The TWO TREES Laser Engraver Frame Upgrade Kit, illustrating potential expanded engraving areas of 420x400mm and 600x600mm.
2. Compatibilità
This official extension upgrade kit is compatible with the following TWO TREES laser engraver models:
- TTS-25
- TTS-55
- TTS-10
- TTS-55 pro
- TTS-10 pro
- TTS-20 pro
Image: Visual representation of compatible models for the upgrade kit.
3. Contenuto della confezione
Verificare che tutti i componenti elencati di seguito siano inclusi nel pacchetto:
- Left and Right Frame Beams (2 pieces)
- Front and Rear Frame Beams (2 pieces)
- X-axis Beam (1 piece)
- Bellows Holder
- Toolkit (includes Allen wrenches and spanner)
- Timing Belts (2 pieces)
- Trasporto
- Wire (extension cables)
- Screw Pack (various screws)
- Fascette per cavi
Image: Layout of all components included in the upgrade kit.
4. Specifiche
| Caratteristica | Descrizione |
|---|---|
| Nome del marchio | DUE ALBERI |
| Numero di modello | Laser Engraver Frame |
| Tipo di articolo | Parti hardware / Parti meccaniche |
| Area di incisione originale | 300 mm x 300 mm |
| Upgraded Engraving Area | Up to 600mm x 600mm (as per product title/description, visual examples show 420mm x 400mm) |
| Materiale del telaio | Alluminio Profile |
| Caratteristiche aggiuntive | Digital scale on aluminum frame, corrugated tube for cable management. |
Image: Visual comparison of the original 300x300mm engraving area versus an upgraded 420x400mm area, showing increased dimensions.
5. Configurazione e installazione
Follow these steps to upgrade your laser engraver frame. For a visual guide, please refer to the tutorial video below.
Video: Machine Retrofit Tutorial for TTS/TT-5.5S lengthened profile aggiornamento.
5.1. Disassembly of Original Frame
- Carefully remove the screws securing the control box to the frame. Disconnect all wires from the control board.
- Remove the laser module from the X-axis beam by loosening its screws.
- Loosen and remove the timing belts from the X and Y axes.
- Disassemble the original X-axis and Y-axis frame beams from the corner brackets.
- Remove the carriage from the X-axis beam by disassembling its wheels.
5.2. Assembly of Upgrade Kit
- Assemble the carriage wheels: Attach the wheels to the carriage plate using the provided screws and nuts. Ensure the wheels are securely fastened.
- Install the timing belts onto the new X-axis beam. Thread the belt through the carriage and secure it. Note: The red coupling shown in the video is for display purposes only; please refer to your actual product.
- Attach the carriage with the installed belt to the new X-axis beam. Ensure the belt is properly tensioned.
- Connect the new Y-axis aluminum extrusions to the existing frame corners. Use the M5*20 screws to secure these connections. Note: When installing, please make sure that the X-axis beam is parallel to the front and rear beam profiles. È possibile utilizzare il rettangolo sulla scala per una regolazione ausiliaria.
- Connect the new X-axis aluminum extrusions to the Y-axis beams, forming the expanded frame. Use the M5*10 screws for these connections.
- Re-attach the laser module to the X-axis beam.
- Install the bellows holders and bellows onto the frame. Fix the bellows with black wire ties to ensure they are secure and manage cables effectively.
- Connect the extension cables to the stepper motors (Y1, Y2, X) and the limit switches. Refer to the wiring diagram on the control board for correct connections. Ensure the Y2 cable is connected to the Y2 port, and the X cable to the X port.
- Re-attach the control box to the frame using M4*20 screws.
5.3. Regolazione della tensione
After assembly, ensure proper tension of the timing belts and smooth movement of the carriage.
- È la posizione più appropriata per sentire un po' di attrito tra la ruota POM e il professionistafile quando si ruota la ruota POM.
- Se la ruota gira in aria e non si adatta al profile, il dado eccentrico può essere regolato in senso orario dalla direzione della testa della vite con una chiave fissa.
Immagine: dettagliata view of the control board wiring connections, showing Y1, Y2, and X motor connections.
6. Istruzioni per l'uso
Once the frame upgrade is complete, your laser engraver is ready for use with its expanded working area. Ensure your engraving software (e.g., LightBurn, LaserGRBL) is configured to recognize the new dimensions of your machine. Always perform a small test engraving to verify calibration and focus before starting large projects.
Immagine: Examples of large and small projects, demonstrating the expanded capabilities of the upgraded engraver.
7. Manutenzione
Regular maintenance ensures optimal performance and longevity of your laser engraver:
- Pulizia: Keep the aluminum profiles and wheels free from dust and debris. Use a soft cloth to wipe down surfaces.
- Tensione della cinghia: Periodically check the tension of the timing belts. They should be taut but not overly tight. Adjust as needed using the eccentric nuts.
- Serraggio delle viti: Ensure all screws and fasteners remain tight. Loose components can affect engraving accuracy.
- Ispezione dei cavi: Inspect all cables for any signs of wear or damage. Ensure they are properly routed and secured with cable ties.
8. Risoluzione Dei Problemi
Ecco alcuni problemi comuni e le loro possibili soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Engraving area not expanded or incorrect size. | Software not configured for new dimensions; incorrect assembly of frame. | Update your engraving software settings to reflect the new working area (e.g., 600x600mm). Double-check all frame connections. |
| Laser module movement is not smooth or skips steps. | Loose timing belts; excessive friction on wheels; stepper motor issues. | Adjust timing belt tension. Ensure POM wheels have slight friction with the profile. Check for any obstructions on the rails. |
| Machine not powering on or unresponsive. | Collegamenti elettrici allentati o errati. | Verify all electrical connections, especially to the control board and stepper motors, are secure and correctly plugged in. Refer to the wiring diagram in the setup section. |
9. Suggerimenti per l'utente
- Verifica della compatibilità: Always confirm that your specific TTS model (e.g., TTS 20 Pro) is listed as compatible before purchasing or installing the upgrade kit.
- Motori passo-passo: This kit is an extension for the frame and does not include stepper motors. You will use the existing stepper motors from your original engraver.
- Gestione dei cavi: Utilize the provided cable ties and corrugated tubes to keep all wiring neat and prevent interference with moving parts.
10. Garanzia e supporto
For any questions regarding usage, technical support, or warranty claims, please contact TWO TREES customer service directly. Refer to the product packaging or the official TWO TREES websito per le informazioni di contatto.
