Introduzione
This manual provides essential instructions for the safe and effective use of your YU XIANG F120 RC Helicopter T6-001 Remote Controller. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage.
Informazioni sulla sicurezza
⚠️ Dichiarazione di non responsabilità:
Solo per uso ricreativo. La modifica illegale di droni/aerei è vietata. Si prega inoltre di prestare attenzione alle leggi e ai regolamenti vigenti nel proprio Paese/area geografica in materia di utilizzo di droni/aerei per garantirne la legalità.
- Always operate the remote controller and associated RC helicopter in open, clear areas, away from people, animals, and obstacles.
- Ensure the remote controller's batteries are properly installed and charged before each use.
- Do not expose the remote controller to moisture, extreme temperatures, or direct sunlight for extended periods.
- Keep the remote controller out of reach of children when not in use.
Contenuto della confezione
Verifica che tutti gli articoli siano presenti nel tuo pacco:
- 1 x T6-001 Remote Controller (Left Throttle configuration)

Prodotto finitoview
The T6-001 is a 2.4 GHz S-FHSS digital proportional remote control system designed for the YU XIANG F120 RC Helicopter. It features a left-throttle configuration, providing precise control over your helicopter's flight. The controller includes various functions for flight adjustments and mode selection.
Caratteristiche principali:
- 2.4 GHz S-FHSS Technology for reliable communication.
- Left Throttle configuration.
- High/Low speed switch (H/L).
- Function and Mode buttons for advanced control.
- Integrated display screen for telemetry or settings (details not specified, refer to helicopter manual for full functionality).
Impostare
This remote controller is a spare part for the YU XIANG F120 RC Helicopter. Initial setup typically involves pairing or binding the controller with your helicopter.
Binding Procedure (General Steps):
- Ensure both the remote controller and the helicopter are powered off.
- Refer to your YU XIANG F120 RC Helicopter's specific user manual for detailed binding instructions. The exact sequence of button presses and power-on steps can vary.
- Typically, you will power on the helicopter in a binding mode (often by holding a button or connecting the battery in a specific way).
- Then, power on the T6-001 remote controller, often while holding a binding button or switch.
- The indicator lights on both the helicopter and the remote controller should change to indicate a successful bind.
- Once bound, power cycle both devices and test the controls in a safe environment before flight.
Note: Always consult the helicopter's manual for precise binding instructions as this controller is a spare part for a specific model.
Istruzioni per l'uso
The T6-001 remote controller provides intuitive control over your YU XIANG F120 RC Helicopter. Familiarize yourself with the controls before attempting flight.
Control Layout (Left Throttle Mode 2):
| Controllare | Funzione |
|---|---|
| Left Stick (Vertical) | Throttle (Power) / Collective Pitch |
| Left Stick (Horizontal) | Yaw (Tail Rotor Control) |
| Right Stick (Vertical) | Passo (avanti/indietro) |
| Right Stick (Horizontal) | Roll (Left/Right) |
| Interruttore H/L | High/Low Speed Mode Selection |
| Pulsante FUNZIONE | Activates specific functions (refer to helicopter manual) |
| Pulsante MODE | Changes flight modes or settings (refer to helicopter manual) |
| Leve di rifinitura | Fine-tune helicopter stability (adjust as needed for stable hover) |
Before flying, ensure all trim settings are neutral. Perform a pre-flight check to confirm all controls respond correctly and smoothly.
Manutenzione
Proper maintenance will extend the life of your remote controller.
- Pulizia: Wipe the controller with a soft, dry cloth. Do not use solvents or harsh chemicals.
- Cura della batteria: Remove batteries if the controller will not be used for an extended period to prevent leakage. Use only recommended battery types.
- Magazzinaggio: Conservare il controller in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Ispezione: Periodically check for any loose parts, damaged switches, or frayed wires.
Risoluzione dei problemi
If you encounter issues with your T6-001 remote controller, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il controller non si accende. | Batterie scariche o installate in modo errato. | Sostituire le batterie con altre nuove, assicurandosi che la polarità sia corretta. |
| L'elicottero non risponde al controllore. | Not bound, out of range, or interference. | Re-bind the controller to the helicopter. Ensure you are within operating range. Move away from sources of interference (Wi-Fi, other 2.4GHz devices). |
| Erratic helicopter behavior. | Interference, damaged controller, or helicopter issue. | Check for interference. If the problem persists, consult the helicopter's manual or contact support. |
| Display screen is blank or unreadable. | Batteria scarica o guasto interno. | Replace batteries. If still blank, contact support. |
Specifiche
| Attributo | Dettaglio |
|---|---|
| Numero di modello | T6-001 |
| Nome del marchio | walkera |
| Modello di drone compatibile | YU XIANG F120 F03 |
| Marca di droni compatibile | EACHINE (also compatible with YU XIANG F120) |
| Misurare | As shown in product images |
| Pacchetto | No (typically bulk packaging for spare parts) |
| Origine | Cina continentale |
Suggerimenti per l'utente
- Verifica della compatibilità: Prima dell'acquistoasing or using, always confirm that the T6-001 remote controller is compatible with your specific YU XIANG F120 RC Helicopter model.
- Qualità della batteria: Using high-quality batteries can improve signal stability and extend operating time.
- Pratica: If new to RC helicopters, practice in a simulator or a very open area to get accustomed to the left-throttle controls before attempting complex maneuvers.
Garanzia e supporto
For warranty information, technical support, or replacement parts, please contact the original seller or manufacturer. Keep your purchase receipt as proof of purchase.





