Introduzione
The MOES ZHT-006 Zigbee Smart Thermostat is designed for intelligent control of various heating systems, including water floor heating, electric heating, and water/gas boilers. This device provides comprehensive convenience for managing your home's temperature, offering both manual and programmable control options. It integrates with smart home ecosystems via Tuya/Smart Life APP, and supports voice control through Amazon Alexa and Google Assistant. The thermostat also features a built-in weather station display for indoor temperature, humidity, and outdoor UV information.
Before installation and use, please read this manual carefully to ensure proper setup and operation. Keep this manual for future reference.
Informazioni sulla sicurezza
WARNING: Electrical Shock or Equipment Damage Hazard.
- Può provocare scosse individuali o cortocircuitare i circuiti dell'apparecchiatura.
- Disconnect power supply before installation or maintenance.
- Ensure the product is suitable for your heating equipment before installation.
- Strictly follow the wiring diagram for installation.
- Installation to the wall requires suitable fasteners.
- Do not pull cables too hard to avoid damage.
- If using hard plastic wire, bend it to an appropriate angle in advance.
- Installation should be performed by a trained, experienced service technician.
- Do not attempt to repair the product yourself; contact after-sales service for equipment failure.
- After installation, verify normal and safe operation according to this manual.
Contenuto della confezione
- Termostato: 1 pz.
- Viti: 2 pezzi
- User Guide: 1 pc (This document)
- Wall plate: 1 pc
- QC Passed certificate: 1 pc
- Floor sensor: Optional (not included with GA and GC models)
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Modello | ZHT-006 |
| Alimentazione elettrica | 95~240 V CA, 50~60 Hz |
| Carico corrente | 5A (riscaldamento dell'acqua, caldaia a gas), 16A (riscaldamento elettrico) |
| Sensore | NTC3950, 10K |
| Precisione | ±1°C |
| Imposta l'intervallo di temperatura | 5-35°C |
| Intervallo di temperatura ambiente | 5-99°C |
| Visualizzazione dell'intervallo di temperatura | Temperatura da 5 a 99°C |
| Temperatura ambiente | Temperatura da 0 a 45°C |
| Umidità ambientale | 5~95% RH (senza condensa) |
| Temperatura di conservazione | -10~45°C |
| Consumo energetico | <1.5Settembre |
| Errore di temporizzazione | <1% |
| Materiale del guscio | PC+ABS (ignifugo) |
| Scatola di installazione | Scatola quadrata da 86*86 mm o rotonda europea da 60 mm |
| Terminali a filo | Wire 2x1.5mm² or 1x2.5mm² |
| Classe di protezione | Grado di protezione IP20 |
| Pulsanti | Pulsanti a sfioramento capacitivo |
| Banda di frequenza | Frequenza |
| Potenza di trasmissione radio massima | <+10dBm |
Dimensioni: 88mm (width) x 88mm (height) x 37.5mm (depth, from wall surface) / 11.9mm (depth, embedded part).
Image: Detailed dimensions of the thermostat (88mm x 88mm x 37.5mm) and its embedded part (11.9mm), along with a basic wiring terminal layout.
Impostare
1. System Type Identification
The ZHT-006 series supports different heating systems. Identify your system type:
- GA: For underfloor water heating.
- GB: For underfloor electric heating.
- GC: For water/gas boiler heating.
Image: Visual representation of GA (water heating), GB (electric heating), and GC (water/gas boiler heating) system types.
2. Installazione fisica
Il termostato è adatto per l'installazione all'interno di una scatola standard da 86 mm o una scatola europea da 60 mm.
- Fase 1: Mantenere l'alimentazione spenta.
- Fase 2: Remove the mounting plate by pushing the LED assembly.
- Fase 3: Connect power supply and load into the appropriate terminals. Refer to the "Wiring" section below for details.
- Fase 4: Fissare la piastra di montaggio al muro con le viti fornite nella scatola.
- Fase 5: Fix the thermostat body and the mounting plate by the lower button.
- Fase 6: Installazione completata.
Image: Diagram showing compatibility with standard 86mm square cassettes and 60mm European cassettes for installation.
3. Cablaggio
Ensure power is disconnected before wiring. Follow the specific wiring diagram for your thermostat model (GA, GB, or GC).
- GA (Water Heating): Connect Live (L) and Neutral (N) to the power supply. Connect the actuator to the NO (Normally Open) and N terminals.
- GB (Electric Heating): Connect Live (L) and Neutral (N) to the power supply. Connect the electric floor heating element to the L and N terminals.
- GC (Water/Gas Boiler): Connect Live (L) and Neutral (N) to the power supply. Connect the dry contact of the boiler to the NO and N terminals.
Note: NTC and Modbus connections are optional. If your boiler has more than three wires, please contact customer support for assistance.
Image: Wiring diagrams for GA (Water Heating), GB (Electric Heating), and GC (Water/Gas Boiler) models, showing connections for power, actuators, and NTC sensor.
4. Download e registrazione dell'app
The MOES App is recommended for enhanced compatibility and features, including Siri, widgets, and scene recommendations. Tuya Smart/Smart Life App also works.
- Download the "MOES" App from your app store (available on iOS and Android).
- Open the App and tap "Register" to create an account using your mobile number or email. Follow the prompts to get a verification code and set a password. If you already have a MOES account, tap "Log in".
Image: Illustration showing both manual touch control on the thermostat and remote control via the Tuya Smart APP on a smartphone.
5. Zigbee Connection (Pairing Mode)
Ensure your device is within the effective signal coverage of your smart Zigbee gateway for successful connection.
- Assicurati che la tua APP MOES si sia connessa correttamente a un gateway Zigbee.
- Reimpostare il termostato: When the thermostat is OFF, press and hold the "down arrow" button until the thermostat screen flashes quickly and displays the "Wi-Fi" icon.
- In the MOES App, navigate to your Zigbee gateway.
- Tap "Add subdevice" and follow the on-screen instructions. The LED on the thermostat should blink.
- The connection process may take 10-120 seconds depending on your network condition.
- Once the device is added successfully, you can edit its name and enter the device page.
- Click "Done" to enjoy smart home automation.
Istruzioni per l'uso
Riferimento rapido della schermata iniziale
Image: Close-up of the thermostat's LCD display and hidden touch buttons, highlighting its borderless design and light guide strip.
Il display principale mostra:
- Tempo: Ora corrente.
- Settimana: Giorno corrente della settimana.
- Temperatura ambiente: Temperatura ambiente attuale.
- Imposta temperatura: Temperatura impostata desiderata.
- Riscaldamento acceso: Indicatore quando il riscaldamento è attivo.
- Underfloor Heating On: Indicator for underfloor heating.
- Modalità: Current operating mode (Manual/Programmable).
- Orologio: Clock setting icon.
- Accensione/spegnimento: Pulsante di accensione.
- Frecce su/giù: Regolazione della temperatura.
- Wifi: Stato della connessione Wi-Fi.
- Serratura: Keypad lock indicator.
- Periodo: Current program period.
- Energy-saving/Sleep mode: Indicator for energy-saving or sleep mode.
- Visualizzazione della temperatura: Temperature unit display.
Controllo manuale
- Accensione/spegnimento: Premere il pulsante di accensione per accendere o spegnere il termostato.
- Function & Programmable Mode: Touch the mode icon to switch between manual mode ( will show) and programmable mode ( will show).
- Setting Temperature (Manual Mode): In manual mode, press the Up/Down arrows to set your desired temperature. In programmable mode, temperature setting is locked.
- Adjusting/Setting the Clock: Press the clock icon to set minute, hour, and weekday using the Up/Down arrows. Press again to confirm and exit.
- Locking your Thermostat: Press and hold the Up/Down arrows simultaneously for 5 seconds to lock/unlock your thermostat. In advanced settings (item 3), you can choose between full lock (all buttons locked) or half lock (all buttons except power button locked).
- Checking Floor Sensor Temperature: Press and hold the Up/Down arrows simultaneously for 5 seconds to display the floor sensor temperature.
Programmable Schedules (5+1+1 Six Periods)
A separate schedule can be set for weekdays (Mon–Fri), Saturday, and Sunday, each with 6 periods.
Method One (Manual Setting on Thermostat):
- Touch the mode icon to switch to programmable mode.
- Touch and hold the mode icon until the weekday schedule settings appear (1 2 3 4 5 will show on the left of the screen).
- Use the Up/Down arrows to adjust the ON time for Period 1.
- Press the mode icon again and use the Up/Down arrows to set the temperature for Period 1.
- Repeat this process for Periods 2, 3, 4, 5, and 6.
- Press the mode icon once more to enter the Saturday schedule settings (6 will show). Repeat the above steps.
- Press the mode icon again to enter the Sunday schedule settings (7 will show). Repeat the above steps.
- Press the mode icon once more to confirm and exit.
Default Program Schedule:
| Periodo | Weekday (Mon-Fri) Time | Weekday Temp | Saturday Time | Saturday Temp | Sunday Time | Sunday Temp |
|---|---|---|---|---|---|---|
| 1 | 06:00 | 20°C | 06:00 | 20°C | 06:00 | 20°C |
| 2 | 08:00 | 15°C | 11:00 | 21°C | 12:00 | 21°C |
| 3 | 11:30 | 15°C | 13:30 | 22°C | 14:30 | 22°C |
| 4 | 13:30 | 15°C | 17:30 | 23°C | 18:30 | 23°C |
| 5 | 17:00 | 22°C | 22:00 | 20°C | 22:00 | 20°C |
| 6 | 22:00 | 15°C |
Immagine: Example of a weekly programmable schedule with 6 periods per day, showing energy-saving benefits.
Method Two (Using the App): Refer to the MOES App interface for setting up weekly programming schedules. The app provides a more user-friendly interface for this purpose.
Controllo remoto dell'app
Control your thermostat from anywhere using the MOES App (or Tuya/Smart Life App).
- View temperatura e umidità attuali della stanza.
- Regola la temperatura desiderata.
- Passa dalla modalità manuale a quella programmabile.
- Enable/disable button lock.
- Access energy-saving features.
- Create local groups and share device control with family members.
Image: Screenshot of the smartphone app interface showing various control options for the thermostat, including temperature adjustment, mode selection, and schedule settings.
Image: Diagram illustrating how multiple family members can access and control a single thermostat device via the app.
Controllo vocale (Alexa e Google Assistant)
The thermostat is compatible with Amazon Alexa and Google Home for simple voice control.
- Link your MOES App account with Alexa or Google Home.
- Use commands like: "Alexa, set living room to 30 degrees." or "Hey Google, what's the temperature in the bedroom?"
Image: Illustration demonstrating voice control functionality with Amazon Alexa and Google Assistant devices.
Weather Station Functionality
The thermostat displays current indoor temperature and humidity, and can synchronize outdoor weather conditions (temperature, humidity, UV) from the internet.
- The weather and humidity will be synchronized within 1 hour after the device is connected to the Internet for the first time.
- Weather data will be synchronized every hour thereafter.
Image: Thermostat display showing temperature and humidity, with an illustration of weather synchronization.
Manutenzione
The MOES ZHT-006 thermostat requires minimal maintenance. To ensure optimal performance and longevity:
- Pulizia: Pulisci delicatamente lo schermo e l'esterno con un panno morbido e asciutto. Evita di utilizzare detergenti abrasivi, solventi o spray chimici, poiché potrebbero danneggiare il dispositivo.
- Aggiornamenti del firmware: Periodically check the MOES App for available firmware updates to ensure your thermostat has the latest features and security enhancements.
- Alimentazione elettrica: Garantire un'alimentazione stabile entro il volume specificatotage range (95~240 VAC).
Risoluzione dei problemi
| Fenomeno | Gestione |
|---|---|
| L'alimentazione è accesa ma senza display. | Check if the terminals between the LCD panel and Power Unit Box are loose. |
| Senza output ma il display funziona. | Utilizzare un nuovo pannello LCD o una nuova Power Unit Box per sostituire quello vecchio. |
| Room Temperature is a little different from the actual. | Perform temperature calibration in item 1 of high senior options (advanced settings). |
| Thermostat not pairing with Zigbee gateway. | Ensure the thermostat is in pairing mode (Wi-Fi icon flashing) and within range of the gateway. Check gateway status. |
Suggerimenti per l'utente
- Modalità di accoppiamento: To put the thermostat into pairing mode, ensure it is powered off, then press and hold the "down arrow" button until the screen flashes quickly and the Wi-Fi icon appears. This is crucial for connecting to your Zigbee gateway.
- Controllo app: For the most flexible control, utilize the MOES App. It allows you to adjust settings, monitor temperatures, and manage schedules remotely, even before you arrive home.
- Comandi vocali: Integrate your thermostat with Alexa or Google Home for convenient hands-free temperature adjustments.
Garanzia e supporto
Istruzioni di garanzia:
- Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer.
- To exercise warranty rights, the purchaser must present a warranty card and proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase).
- If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and return it to the place of purchase for after-sales maintenance.
- If the product is damaged due to personal reasons, a maintenance fee will be charged.
- The warranty does not cover mechanical damage caused by user fault, product defects caused by such damage, or damage caused by improper use of the product.
- The warranty does not cover defects due to natural wear and tear.
- Warranty rights expire if the warranty seal or serial number is removed, unauthorized service is performed, or non-original parts are used.
Dichiarazione di conformità:
WENZHOU NOVA NEW ENERGY CO., LTD hereby declares that the radio system type ZHT-006 complies with directives 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU.
Il testo completo della dichiarazione di conformità UE è disponibile all'indirizzo: https://www.moestech.com/blogs/news/zht-006
Manuale utente PDF: Per una versione PDF scaricabile del manuale utente, fare riferimento a: https://manuals.plus/m/2867fdb19203e2dd470e05b195cf78d6fa2d366d8eb01e423a7ff05d27c99778
Servizio post-vendita: For any equipment failure or support, please contact service@moeshouse.com.
