1. Introduzione
The SmallRig Horizontal-to-Vertical Mount Plate 4424 is an accessory designed for use with Sony Alpha 7C II and Alpha 7CR cameras, specifically when paired with the SmallRig Cage 4422 or Baseplate 4438. This mount plate enables quick and seamless switching between horizontal and vertical shooting orientations without the need to adjust the lens optical axis. It ensures full access to the camera's LCD flip screen, battery door, card slot, and other ports. The design incorporates built-in pads to prevent scratches and twisting, ensuring a secure fit for your camera.
2. Contenuto della confezione
Si prega di verificare che tutti gli articoli siano presenti nel pacco:
- Lens Collar Mount Plate x 1
- Chiave a brugola x 1
3. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | 4424 |
| Tipo di gabbia | Camera Cage Accessory |
| Dimensioni del prodotto (LxAxP) | 118 x 72.5 x 58.3 mm |
| Peso del prodotto | 110 ± 5 g |
| Materiale (i) | Lega di alluminio, acciaio inossidabile |
| Punti di montaggio | 1/4"-20 threaded holes, 3/8"-16 threaded hole |
| Quick Release Compatibility | Arca-Swiss, Manfrotto RC2, DJI RS-series gimbals |
4. Compatibilità
This mount plate is designed to be used with the following SmallRig products and camera models:
- SmallRig Cage Kit for Sony Alpha 7C II / Alpha 7CR (Model 4422)
- SmallRig Bottom Mount Plate for Sony Alpha 7C II / Alpha 7CR (Model 4438)
Additionally, the mount plate is compatible with:
- Arca-Swiss type tripods
- Manfrotto RC2 type tripods
- DJI RS-series gimbals
5. Configurazione e installazione
Note importanti:
- This product requires either the SmallRig Cage 4422 or Baseplate 4438 for proper use.
- Always remove the camera lens before installing the mount plate to prevent damage.
Fasi di installazione:
- Attach to Cage/Baseplate: Align the mount plate with the designated mounting points on your SmallRig Cage 4422 or Baseplate 4438.
- Secure to Camera: Once aligned, use the provided Allen wrench to securely fasten the mount plate to the cage/baseplate, which is already attached to your Sony Alpha 7C II / Alpha 7CR camera. Ensure all screws are tightened firmly but do not overtighten.
- Controllo finale: Verify that the mount plate is stable and does not wobble.
6. Funzionamento
Switching Between Horizontal and Vertical Modes:
The mount plate features a quick-locking knob that allows for a 90-degree rotation. Simply unlock the knob, rotate your camera to the desired horizontal or vertical orientation, and then re-lock the knob to secure it in place. This design ensures that the lens optical axis remains consistent, saving time during shoots.
Rimozione della lente:
A dedicated lens release button is integrated into the design, making lens removal easy and efficient.
Opzioni di montaggio:
The bottom of the mount plate features an Arca-Swiss type quick release plate, allowing for rapid transitions between various accessories such as handles, tripods, and DJI RS-series stabilizers. Additionally, 1/4"-20 and 3/8"-16 threaded holes are available for attaching other quick-release plates or accessories like magic arms.
Gestione dei cavi:
The mount plate adopts a quick-release design with a hand-tightening screw to protect cable interfaces and stabilize signal transmission, ensuring a stable connection for your camera accessories.
7. Manutenzione
To ensure the longevity and optimal performance of your SmallRig Horizontal-to-Vertical Mount Plate, follow these maintenance guidelines:
- Pulizia: Pulire la piastra di montaggio con un panno morbido e asciutto dopo ogni utilizzo per rimuovere polvere e impronte digitali. Per lo sporco ostinato, utilizzare un panno leggermenteamp panno e poi asciugare accuratamente.
- Evitare prodotti chimici aggressivi: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and materials.
- Magazzinaggio: Store the mount plate in a clean, dry environment away from extreme temperatures and humidity when not in use.
- Ispezione: Periodically check all screws and moving parts for tightness. Re-tighten if necessary using the provided Allen wrench.
8. Risoluzione Dei Problemi
This section addresses common issues you might encounter with your mount plate.
Issue: Mount plate feels loose or wobbly.
- Soluzione: Ensure that the mount plate is correctly attached to the SmallRig Cage 4422 or Baseplate 4438. Use the provided Allen wrench to check and tighten all fastening screws.
Issue: Difficulty rotating between horizontal and vertical modes.
- Soluzione: Verify that the quick-locking knob is fully disengaged before attempting to rotate. If it's stiff, ensure no debris is obstructing the mechanism.
Issue: Camera buttons or ports are obstructed.
- Soluzione: The mount plate is designed for full access. Double-check that the mount plate is correctly installed and aligned with your camera and compatible SmallRig cage/baseplate. Incorrect installation might lead to minor misalignments.
9. Suggerimenti per l'utente
Non sono stati forniti suggerimenti specifici per l'utente da parte di reviews or Q&A for this product. However, general best practices for camera accessories include:
- Always ensure all connections are secure before operating your camera setup.
- Familiarize yourself with the quick-release mechanisms to maximize efficiency during shoots.
- When attaching to gimbals, ensure proper balancing after installation for optimal performance.
10. Garanzia e supporto
Per informazioni sulla garanzia, supporto tecnico o richieste di assistenza, fare riferimento al sito ufficiale SmallRig webo contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.
