1. Introduzione
The ANCEL BA301 Battery Tester utilizes advanced conductance testing technology to provide easy, quick, and accurate measurements of vehicle starting battery capabilities. It assesses the battery's health, and identifies common faults within the vehicle's starting and charging systems. This tool assists maintenance personnel in quickly and accurately diagnosing issues, facilitating efficient vehicle repair.
Le caratteristiche principali includono:
- Support for a wide range of 6V/12V batteries.
- Funzionamento intuitivo.
- Ability to test batteries both in and out of the vehicle.
- Delivers accurate results within milliseconds.
- Fornisce analisi della durata della batteria e percentuali di salutetage.
- Analysis results indicate: Good, Recharge, or Replace.
- Aggiornamenti software gratuiti a vita e stampa dei dati tramite PC.
- Accesso con un solo tasto al volume della batteriatage analisi della forma d'onda.
- Three LED indicators for immediate battery status.
- High-quality STM-32 103VCT6 Chip Set for faster performance.
2. Impostazione
2.1 Contenuto della confezione
Assicurarsi che tutti gli elementi siano presenti:
- ANCEL BA301 Main Unit
- Manuale d'uso
- Cavo USB
2.2 Accensione iniziale e selezione della lingua
- Collegare il cl rossoamp al terminale positivo (+) della batteria e al terminale nero clamp al terminale negativo (-). Il dispositivo si accenderà automaticamente.
- From the Main Menu, navigate to 'Setup' using the arrow keys and press 'ENTER'.
- Select 'LANGUAGE' from the Setup menu.
- Choose your preferred language from the list (Chinese, English, German, French, Japanese, Korean, Dutch, Russian, Spanish, Italian, Portuguese, Polish) and press 'ENTER' to confirm.
3. Istruzioni per l'uso
The ANCEL BA301 offers various testing functions accessible from the main menu. Use the arrow keys to navigate and 'ENTER' to select.
3.1 Test della batteria
Questa funzione valuta lo stato generale della batteria.
- From the Main Menu, select 'Car' or 'Motorcycle' depending on the battery type.
- Selezionare 'Test batteria'.
- Select 'In-Vehicle' or 'Out-of-Vehicle' based on the battery's location.
- Selezionare il tipo di batteria (ad esempio, normale allagata, AGM a piastra piana, AGM a spirale, GEL, EFB).
- Select the battery standard (e.g., CCA, IEC, EN, DIN, BCI).
- Inserire la corrente di avviamento a freddo (CCA) nominale della batteria Amps) as specified on the battery label.
- The tester will perform the measurement and display results including State of Health (SOH), Internal Resistance (R), CCA, and Voltage(VOL).
3.2 Prova di avviamento
Questo test valuta il sistema di avviamento del veicolo.
- From the Main Menu, select 'Car' or 'Motorcycle'.
- Choose 'Cranking Test'.
- Follow the on-screen prompts: "Please turn off the engine before pressing ENTER to enter the test."
- Premere 'INVIO'.
- When prompted "START ENGINE", start the vehicle's engine.
- The tester will display the cranking time, cranking status (e.g., NORMAL), and voltage durante l'avviamento.
3.3 Test di ricarica
Questo test verifica il sistema di ricarica del veicolo (alternatore).
- From the Main Menu, select 'Car' or 'Motorcycle'.
- Choose 'Charging Test'.
- The tester will perform a ripple test and then prompt: "Increase RPM to 2500 r/min and keep it 5 seconds, Press ENTER to continue".
- Increase the engine RPM as instructed and press 'ENTER'.
- Il tester visualizzerà il volume caricatotage, voltage, ondulazione voltage, and charging status (e.g., CHARGING NORMAL).
3.4 Analisi della forma d'onda
The BA301 can record and display voltage changes in a graph for detailed analysis.
- Dal menu principale, selezionare "Forma d'onda".
- The device will immediately begin displaying a real-time voltage forma d'onda.
- This feature is useful for observing voltage fluctuations during cranking or charging.
3.5 Riview e stampa dati
The device allows you to review stored test results and print them via a PC.
- Dal menu principale, seleziona 'Ripristinaview' A view risultati dei test salvati in precedenza.
- To print, connect the BA301 to a computer using the provided USB cable.
- From the Main Menu, select 'Print'.
- Follow the on-screen instructions to upload results or waveforms to your PC for printing.
4. Manutenzione
4.1 Manutenzione del dispositivo
- Mantenere il dispositivo pulito e asciutto. Pulire con un panno morbido e asciutto.amp panno se necessario.
- Evitare di esporre il dispositivo a temperature estreme, umidità o luce solare diretta.
- Quando non lo si utilizza, conservare il dispositivo in un luogo sicuro per evitare danni fisici.
4.2 Aggiornamenti software
The ANCEL BA301 offers lifetime free software updates. Connect the device to a PC (Windows XP, 7, 8, 10 supported) via the USB cable and visit the official ANCEL website for the latest update tools and firmware. Regular updates ensure optimal performance and compatibility with new battery technologies.
5. Risoluzione Dei Problemi
If you encounter issues with your ANCEL BA301, consider the following:
- Il dispositivo non si accende: Garantire il clamps are securely connected to the correct battery terminals (red to positive, black to negative). The battery must have sufficient charge for the tester to power on.
- Letture imprecise: Double-check that the battery type and CCA rating entered into the device match the specifications on the battery. Ensure clamps have good contact with clean battery terminals.
- Connection issues with PC: Verify the USB cable is properly connected to both the device and the PC. Ensure the correct drivers are installed on your computer (usually available on the ANCEL webposto).
- Messaggi di errore: Refer to the specific error code or message displayed on the screen and consult the full user manual (if available) or ANCEL's online support for detailed explanations and solutions.
6. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Volume di sistematage | 6V - 12V |
| Test Result Indicators | Good, Recharge, or Replace |
| Misurazione della capacità | Avviamento a freddo Amps (CCA), DIN, EN, IEC |
| Resistenza interna | Misurato in mΩ |
| Indicazione della durata della batteria | percentualetage(%) |
| Test eseguiti | Test della batteria, test di avviamento, test di carica, Voltage Waveform Test |
| Gestione dei dati | Record and Re-play battery data, Print via PC |
| Lingue supportate | Cinese, inglese, tedesco, francese, giapponese, coreano, olandese, russo, spagnolo, italiano, portoghese, polacco |
| Chipset | STM-32 103VCT6 |
| Dimensioni (circa) | Height: 14 cm, Width: 8 cm, Thickness: 2.5 cm |
7. Garanzia e supporto
The ANCEL BA301 comes with a lifetime free update service, ensuring your device remains current with the latest software and features. For specific warranty details, please refer to the product packaging or contact ANCEL customer support directly. Technical support and additional resources can typically be found on the official ANCEL websito.
8. Suggerimenti per l'utente
- For accurate readings, always ensure battery terminals are clean and free of corrosion before connecting the tester clamps.
- When performing the Cranking Test, make sure the engine is completely off before initiating the test, and only start the engine when prompted by the device.
- During the Charging Test, follow the RPM instructions precisely to get reliable alternator performance data.
- Regularly check for software updates on the ANCEL website to benefit from improved features and compatibility.
- The device is designed for durability and long-lasting performance, making it a reliable tool for routine battery checks.
