Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your M6H Electric Bike LCD Display Meter and 36V 350W Sine Wave Controller. Please read this manual carefully before use to ensure proper function and longevity of your product.
Configurazione e installazione
The M6H LCD Display and Sine Wave Controller are designed for universal electric bike and scooter applications. Professional installation is recommended due to the electrical nature of the components.
Contenuto della confezione:
- 1 x M6H LCD Display
- 1 x 36V 350W Sine Wave Controller
Fasi di installazione:
- Montare il display LCD: Securely attach the M6H LCD Display to your bicycle handlebar. The display is compatible with handlebar sizes 22.2MM, 25.4MM, 28.6MM, and 31.8MM. Ensure the display is positioned for optimal visibility and accessibility.
- Collegare il controller: The Sine Wave Controller features multiple color-coded wires for connection to the motor, battery, display, throttle, and other e-bike components. Carefully match each wire to its corresponding function on your e-bike system. Refer to your e-bike's wiring diagram for specific connections.
- Collegare il display LCD al controller: Connect the communication cable from the M6H LCD Display to the designated port on the Sine Wave Controller. The communication method is UART.
- Proteggere tutte le connessioni: Ensure all electrical connections are tight and properly insulated to prevent short circuits or damage.
- Accensione iniziale: After all connections are made, power on your e-bike system. The LCD display should illuminate and show initial readings.
Istruzioni per l'uso
The M6H LCD Display provides essential information and control over your electric bike's functions.
Funzioni di visualizzazione:
- Visualizzazione della velocità: Mostra la velocità di guida attuale.
- Indicatore della batteria: Visualizza il livello di carica residua della batteria.
- Funzione di potenziamento: Activates a power boost mode.
- Attrezzatura di potenziamento: Indicates the current level of pedal assist (PAS).
- Subtotale chilometraggio/Chilometraggio totale: Tracks trip distance and total distance traveled.
- Durata: Shows the duration of the current ride.
- Metric Conversion: Allows switching between metric (km/h, km) and imperial (mph, miles) units.
- Messaggio di errore: Displays error codes or warnings if issues are detected.
Funzione di ricarica USB:
The display is equipped with a USB charging port, providing 5V/500MA output for charging small electronic devices.
Manutenzione
Regular maintenance ensures the optimal performance and longevity of your M6H display and controller.
- Pulizia dello schermo: Utilizzare un morbido, damp cloth to gently wipe the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
- Proteggi dagli elementi: While designed for outdoor use, avoid prolonged exposure to heavy rain or direct water spray. Ensure the display and controller are kept as dry as possible.
- Controllare le connessioni: Controllare periodicamente tutti i collegamenti elettrici per assicurarsi che siano saldi e privi di corrosione o danni.
- Evitare l'impatto: Protect the display from physical impact or drops, which can cause internal damage or screen cracks.
Risoluzione dei problemi
If you encounter issues with your M6H LCD Display or Sine Wave Controller, refer to the following common problems and solutions:
- Il display non si accende:
- Controllare il collegamento dell'alimentazione principale dalla batteria al controller.
- Ensure the connection between the display and controller is secure.
- Verify the e-bike battery has sufficient charge.
- Incorrect Speed or Mileage Readings:
- Check the speed sensor connection to the controller and ensure the sensor is properly aligned with the magnet on the wheel.
- Confirm that the wheel circumference setting (if adjustable) is correct.
- Motor Not Responding or Irregular Power:
- Check all motor phase wire connections and Hall sensor connections to the controller.
- Ensure the throttle or PAS sensor is correctly connected and functioning.
- The display's 'Fault Prompt' may indicate a specific error code. Consult a professional or your e-bike's main manual for interpretation of these codes.
- Ricarica USB non funzionante:
- Ensure the e-bike system is powered on.
- Controllare il cavo USB e il dispositivo in carica.
For complex issues or if troubleshooting steps do not resolve the problem, it is recommended to consult a qualified e-bike technician.
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Modello del prodotto | M6H LCD Instrument + Sine Wave Controller |
| Vol. adattivotage | 24V / 36V / 48V / 60V |
| Alimentazione del controller | 350W |
| Materiale del guscio | ABS and Metal Parts |
| Metodo di comunicazione | UART |
| Uscita di ricarica USB | 5 V / 500 mA |
| Colore | Nero |
| Dimensioni del display (L x P x A) | 98.1 x 61.9 x 24.6 MM |
| Applicable Handlebar Sizes | 22.2MM / 25.4MM / 28.6MM / 31.8MM |
| Peso del pacco | Circa 0.51 kg |
| Dimensioni imballo (L x P x A) | Dimensioni: 12 x 8 x 5 cm |
Suggerimenti per l'utente
- Always ensure your e-bike's battery is fully charged before long rides to maximize the utility of the display and controller.
- Familiarize yourself with the display's various modes and settings to optimize your riding experience.
- Keep the display screen clean for clear visibility, especially in bright sunlight.
- If you notice any unusual behavior or error messages, refer to the troubleshooting section or consult a professional.
Garanzia e supporto
For any product-related inquiries, technical support, or warranty claims, please contact your original seller or the manufacturer. Keep your purchase receipt as proof of purchase.
Please note that product appearance, color, and printed text may vary slightly due to different manufacturing batches, but this will not affect the product's functionality or use.
