1. Introduzione e oltreview
The ESTINK P6 Digital Head-Up Display (HUD) is an advanced automotive accessory designed to project essential driving information directly into your line of sight, enhancing safety and convenience. Featuring a dual system (OBD2 and GPS), it offers comprehensive data display and broad compatibility.
Key features include dynamic LED lighting that changes color with driving speed (blue for normal, red flashing for alarms), customizable display modes, and the ability to show both OBD2 and GPS data on the same interface. The 3-inch screen provides clear and concise information.
Figure 1: ESTINK P6 HUD mounted on a car dashboard, displaying key driving information.
2. Contenuto della confezione
Si prega di controllare attentamente il pacco per assicurarsi che tutti gli articoli siano presenti e in buone condizioni:
- 1 x P6 Head-Up Display Host
- 1 cavo OBD
- 1 cavo USB
- 1 x Small Crowbar
- 1 x Manuale utente
- 1 x nastro biadesivo
- 1 x supporto a ventosa
- 1 x Cacciavite
Figure 2: All components included in the ESTINK P6 HUD package.
3. Specifiche
| Caratteristica | Descrizione |
|---|---|
| Tipo di articolo | Visualizzazione della testa in alto |
| Materiale | Elettrone |
| Volume di lavorotage | 11V-18V (Use USB cable for vehicles with voltage superiore a 24 V) |
| Sistema | OBD2+GPS Dual System |
| Dimensioni dello schermo | 3 pollici |
| OBD Mode Functions | Vehicle speed, water temperature, voltage, fuel consumption, rotational speed (RPM), single mileage, total mileage, travel time, driving direction, number of satellites, altitude, time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, acceleration test, brake test, fault code clearing, data stream reading. |
| OBD Mode Alarms | Overspeed alarm, overhigh rotational speed alarm, water temperature alarm, voltage allarme. |
| Funzioni della modalità GPS | Velocità del veicolo, vol.tage, satellite time, altitude, number of satellites, driving direction, single mileage, driving time, acceleration test, brake test. |
| GPS Mode Alarms | Overspeed alarm, low voltage allarme. |
| Dimensioni (L x P x A) | Dimensioni: 13 cm x 11 cm x 8 cm |
| Peso | 0.321 kg |
Compatibilità Nota: The OBD2 mode is compatible with European cars manufactured after 2005 and cars from other regions manufactured after 2008. The GPS mode is universally compatible with all vehicles. If your vehicle is not OBD2 compatible, please use the GPS mode.
Figure 3: Illustration of the dual OBD and GPS system architecture.
4. Configurazione e installazione
Follow these steps to install your ESTINK P6 Head-Up Display:
- Preparazione: Ensure you have the P6 HUD unit and the appropriate connection cable (OBD or USB).
- Collegare il cavo:
- For OBD2 mode: Locate your car's OBD interface (usually under the dashboard near the steering wheel) and connect the provided OBD cable to both the car's port and the HUD.
- For GPS mode (or if car voltage is >24V): Connect the provided USB cable to the HUD and a suitable USB power source in your vehicle.
- Accensione: Start your vehicle's engine. Then, turn on the power switch of the HUD unit.
- Self-Test and Initialization: The HUD will power on, perform a self-test, and display a startup screen. After completion, it will enter the working interface, indicating successful installation.
- Montaggio:
- Tear off the adhesive film from the bottom of the HUD unit or attach the suction cup bracket.
- Choose a suitable position on your dashboard that provides a clear line of sight without obstructing your view of the road. Secure the unit in place.
Figure 4: Proper placement of the HUD on the dashboard for optimal visibility.
5. Istruzioni per l'uso
The ESTINK P6 HUD offers various functions and customization options:
5.1 Mode Selection (OBD2 vs. GPS)
The P6 HUD automatically detects the connection type. If an OBD2 connection is established, it will default to OBD2 mode. If OBD2 is not detected or not compatible, it will switch to GPS mode. You can typically switch between modes or customize display settings using the physical buttons on the device (refer to the included manual for specific button functions).
5.2 Personalizzazione dello schermo
The device allows for DIY selection across 9 different display modes. You can customize small icons and the data displayed on the interface. Refer to the detailed user manual for instructions on navigating the menu and selecting your preferred display configurations.
5.3 Commutazione unità
È possibile passare da un'unità di misura all'altra:
- Speed: Miles Per Hour (MPH) or Kilometers Per Hour (KM/H)
- Pressure: PSI, Bar, or 100KPA
5.4 Ambient Light Feature
The ambient light strip on the HUD changes color based on your driving status:
- Blu: Indicates normal operation. The color may change subtly with the environment.
- Rosso e lampeggiante: Activates during an alarm condition (e.g., overspeed, high RPM). It remains in the brightest state during an alarm.
The ambient light can be turned off or adjusted manually through the device settings. However, even if turned off, it will still flash red in case of an alarm to ensure critical warnings are visible.
Figure 5: Ambient light behavior and settings.
5.5 Impostazioni di allarme
You can configure various alarms to alert you to critical vehicle conditions:
- Allarme di velocità eccessiva
- Overhigh Rotational Speed (RPM) Alarm
- Allarme temperatura acqua
- Voltage Allarme
- Basso volumetage Alarm (GPS mode)
Consult the included user manual for detailed instructions on how to access and adjust these alarm thresholds.
5.6 Cancellazione dei codici di errore
In OBD2 mode, the HUD can display and clear certain fault codes. This feature can be accessed through the device's menu. Always consult a qualified mechanic for persistent or serious fault codes.
5.7 Tempo di presa
The device allows you to set the time displayed on the lower right corner. Refer to the manual for specific menu navigation to adjust the time.
6. Risoluzione Dei Problemi
If you encounter issues with your ESTINK P6 HUD, refer to the following common problems and solutions:
| Problema | Possibile causa/soluzione |
|---|---|
| L'HUD non si accende. |
|
| Solo volumetage is displayed, or no data in OBD mode. |
|
| Inaccurate fuel consumption readings. |
|
| HUD turns off after a few minutes. |
|
| Nessun segnale GPS. |
|
| Il display è troppo scuro/luminoso. |
|
7. Suggerimenti per l'utente
- Accurate Fuel Consumption: For precise fuel consumption readings, remember to adjust the engine displacement in the HUD's settings to match your vehicle's engine size.
- Verifica della compatibilità: If your car is an older model (pre-2005 for European, pre-2008 for others) or you experience issues with OBD2 mode, utilize the GPS mode. It provides essential speed and driving data universally.
- Ambient Light Awareness: While the ambient light can be customized or turned off, be aware that it will always flash red during alarm conditions, ensuring you don't miss critical warnings.
- Supporto linguistico: The device instructions and interface support multiple languages, allowing for easier setup and operation.
- Diesel Vehicle Use: The GPS mode is suitable for diesel vehicles, especially if OBD2 compatibility is uncertain for older diesel models.
8. Manutenzione
To ensure the longevity and optimal performance of your ESTINK P6 HUD, follow these maintenance guidelines:
- Pulizia: Gently wipe the display screen and exterior with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the device.
- Temperatura: Do not expose the device to extreme temperatures (very hot or very cold) for extended periods. This can affect the internal electronics and screen.
- Connessioni: Periodically check that all cables (OBD, USB) are securely connected and free from damage. Loose connections can lead to intermittent operation.
- Magazzinaggio: If storing the device for a long period, disconnect it from the vehicle and store it in a cool, dry place.
9. Garanzia e supporto
The ESTINK P6 Head-Up Display is manufactured by ESTINK. For any questions regarding product compatibility, technical support, or warranty claims, please contact the seller or manufacturer directly.
Conservare la prova d'acquisto per eventuali domande relative alla garanzia.
