Manuali+

Parkside X20V Li-Ion Battery Portable Work Light

Cordless LED Work Light User Manual

Model: X20V Li-Ion Battery Portable Work Light

1. Introduzione

This manual provides instructions for the safe and efficient operation of your Cordless LED Work Light. This portable work light is designed for various applications, including outdoor exploration, emergency lighting, workshop use, and construction sites. It features an adjustable lamp head and a built-in USB output port for charging other devices.

2. Informazioni sulla sicurezza

  • Always ensure the work light is securely attached to a compatible battery before use.
  • Do not expose the light to extreme temperatures or direct water immersion.
  • Tenere fuori dalla portata dei bambini.
  • Non fissare direttamente la sorgente luminosa a LED per evitare l'affaticamento degli occhi.
  • Use only with specified Parkside 20V series lithium-ion batteries.

3. Prodotto finitoview

The Cordless LED Work Light is a versatile lighting solution. It consists of an LED lamp head mounted on a base designed to connect to a compatible battery. The base also integrates control switches and a USB output port.

Portable Work Light for Lidl Parkside X20V Li-ion Battery
Figure 1: Portable Work Light for Lidl Parkside X20V Li-ion Battery.
Compatible Models - LED light compatible with Parkside 20V lithium batteries
Figure 2: The LED work light is compatible with Parkside 20V lithium batteries (battery not included).

4. Configurazione e installazione

  1. **Battery Installation**: Align the work light's base with a compatible Parkside 20V series lithium-ion battery. Slide the light onto the battery until it clicks securely into place. Ensure a firm connection.
  2. **Initial Check**: After installation, briefly test the light and USB port to ensure proper function.
Metter il fondo a view of the battery interface on the work light
Figura 3: In basso view of the work light's battery interface, showing connection points for the battery.

Video Demonstration: Setup and Features

Video 1: A demonstration of the work light's assembly, adjustable head, and operation.

5. Istruzioni per l'uso

  1. **Powering On/Off the Light**: Locate the switch on the base of the work light that controls the LED light. Flip the switch to the 'ON' position to illuminate the light and to 'OFF' to turn it off.
  2. **Adjusting the Lamp Head**: The lamp head is adjustable to direct light as needed. Gently pivot the lamp head to achieve the desired angle for multi-directional lighting.
  3. **Using the USB Output Port**:
    • Locate the USB output port and its corresponding switch on the base.
    • Connect your device (e.g., mobile phone) to the USB port using a compatible cable.
    • Flip the USB output switch to the 'ON' position to begin charging your device.
    • Flip the switch to 'OFF' when charging is complete or not in use.
Switches for USB output port and light ON/OFF
Figure 4: Location of the switches for controlling the USB output port and the LED light.
L regolabileamp Head - Angle can be adjusted for multi-directional lighting
Figura 5: La lamp head can be adjusted to meet multi-directional lighting needs.

6. Manutenzione

  • **Cleaning**: Wipe the work light with a soft, damp panno. Non usare detergenti abrasivi o solventi.
  • **Storage**: When not in use, store the work light in a dry place away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
  • **Battery Care**: Follow the manufacturer's instructions for your Parkside 20V lithium-ion battery regarding charging, storage, and general care.

7. Risoluzione Dei Problemi

Problema Possibile causa Soluzione
La luce non si accende. Battery not connected properly or discharged. Light switch is OFF. Ensure battery is securely attached and charged. Flip the light switch to ON.
La porta USB non carica i dispositivi. Battery discharged. USB switch is OFF. Device cable faulty. Ensure battery is charged. Flip the USB switch to ON. Try a different USB cable or device.

8. Specifiche

Caratteristica Dettaglio
Tipo di articolo Lanterne portatili
Volume nominaletage 18-20 V massimo
Sorgente luminosa Lampadine a LED
Fonte di alimentazione Rechargeable Battery (Parkside 20V series Li-Ion)
Uscita USB 5V/2.1A, 5V/3.4A, 9V/2A, 12V/1.5A
Materiale del corpo ABS, Aluminum, Strong plastic (3D-printed)
Tipo di batteria LITHIUM ION (Not included)
Dimensioni (circa) Lunghezza: 10 cm, Larghezza: 10 cm, Altezza: 5 cm
Peso (circa) 0.35 kg (senza batteria)
Origine Cina continentale

9. Suggerimenti per l'utente

  • **Dual Functionality**: Remember to utilize the built-in USB port to charge your mobile devices during power outages or when away from power sources.
  • **Optimal Lighting**: Adjust the lamp head frequently to get the best illumination angle for your task, whether it's broad area lighting or focused work.
  • **Emergency Preparedness**: Keep a charged Parkside 20V battery ready with your work light for immediate use during emergencies.

10. Garanzia e supporto

Per qualsiasi domanda, supporto tecnico o richiesta di garanzia, contattare il venditore o il rivenditore presso cui è stato acquistato il prodotto. Conservare la prova d'acquisto ai fini della garanzia.