1. Introduzione
The TwoTrees TTC450 PRO is a versatile CNC router machine designed for precision engraving and cutting across various materials, including wood, acrylic, and soft metals. This model features a 4-axis design and comes 90% pre-assembled for quick setup. It supports both CNC routing and laser engraving functionalities through interchangeable modules, offering a wide range of creative possibilities for hobbyists and professionals alike.
2. Guida all'installazione
The TTC450 PRO is designed for easy assembly, with 95% of the machine pre-assembled, allowing for installation in approximately 10 minutes.
2.1 Disimballaggio e ispezione iniziale
Rimuovere con attenzione tutti i componenti dall'imballaggio. Verificare che tutti i pezzi siano presenti e integri. Fare riferimento alla lista di imballaggio per un inventario completo.
2.2 Fasi di assemblaggio
Follow these simple steps to complete the assembly:
- Display Screen Installation: Securely attach the display screen to its designated position on the machine frame.
- Installazione del mandrino: Mount the spindle motor onto the Z-axis carriage. Ensure it is firmly fastened.
- Installazione dei pannelli laterali: Attach the 8mm thick side panels to the gantry for enhanced stability.
2.3 Collegamento di alimentazione
Connect the power adapter to the machine and then to a suitable power outlet. Ensure the power switch is in the 'off' position before connecting.
2.4 Guida video
Per una panoramica visiva del processo di assemblaggio e delle caratteristiche principali, guarda il video ufficiale del prodotto:
3. Istruzioni per l'uso
3.1 Area di lavoro
The TTC450 PRO offers a generous working area of 460mm x 460mm x 80mm (18.11” x 18.11” x 3.14”), providing ample space for a wide range of projects.
3.2 Switching Modes (CNC & Laser)
The machine features a 3.5-inch color touchscreen with a user-friendly UI for easy control and mode switching. You can seamlessly switch between CNC routing and laser engraving modes by simply replacing the corresponding module.
3.3 Compatibilità del modulo
The TTC450 PRO is compatible with various working modules to meet diverse functional requirements:
- Wood Router Machine: For traditional CNC carving and cutting.
- 500W Spindle Motor: Provides powerful performance for demanding tasks.
- Modulo laser da 20 W: For precise laser engraving and cutting.
- 4th Axis Rotary Module: Enables carving on cylindrical objects, creating complex shapes and contours.
3.4 Compatibilità software
The machine is compatible with GRBL software and supports operating systems such as Windows XP/7/8/10 and Mac OS. For laser engraving, LightBurn and LaserGRBL (free software) are supported.
3.5 Materiali per incisione
The TTC450 PRO is capable of engraving and carving a wide variety of materials, including:
- Wood and wooden boards
- Acrylic and plexiglass
- Stainless steel and soft metals (aluminum, brass)
- Pelle
- PCB, MDF, resin, nylon, carbon fiber, PVC
4. Manutenzione
4.1 Spindle Protection
The machine includes a spindle protection cover to help extend the service life of the spindle by preventing debris accumulation.
4.2 Gestione della polvere
The TTC450 PRO features a dust-proof design and a built-in air duct for easy connection to an air pump, ensuring a clean working environment and extending the machine's lifespan. The spindle offers 6000PA suction power, suitable for most engraving scenarios.
4.3 Dissipazione del calore
The machine incorporates a cast aluminum design for faster heat dissipation, preventing overheating and ensuring stable operation during extended use.
5. Risoluzione Dei Problemi
5.1 Precision Deviation
If you notice any precision deviation after prolonged use, the machine features precision dual brass nuts. The precision can be adjusted by tightening or loosening the securing nut to maintain accuracy up to 0.05mm.
5.2 Collisions and Damage
The TTC450 PRO is equipped with upgraded XYZ limit switches to prevent collisions and potential damage to the machine during operation. In case of an emergency, use the prominent red emergency stop button for immediate shutdown.
5.3 Module Not Functioning
Ensure that the correct module (e.g., wood router, laser module) is securely installed and properly connected. Verify that the machine is in the correct operating mode (CNC or laser) via the touchscreen interface.
6. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Modello n. | TTC450Pro |
| Colore | Nero e rosso |
| Materiale della macchina | Alluminio Profile + Plastica |
| Leadscrew Size & Type | T8 2mm pitch, 4mm lead 5 start acme lead screw |
| Metodo di regolazione dell'altezza | Anpassung des Hubmoduls (automatisch) |
| Dimensioni della macchina | Dimensioni: 742×689×413 mm |
| Dimensioni dell'incisione | 460×460×80mm (18.1×18.1×3.14in) |
| XY axis positioning accuracy | 0.05 millimetri |
| Motore passo-passo | A4988, 1.3A/17HS8401S, NEMA23 20mN.m |
| Engraving precision | ±0.05 millimetri |
| Velocità di incisione | 800 mm/min |
| Mandrino | 80V, 8000RPM/500W, 12000RPM |
| Engraving method | USB connection, Wifi-2.4G Hz |
| Schermo | 4.3-inch touch color screen |
| Carving material | Plastic, soft aluminum, wood, acrylic, PVC, PVB and other soft materials |
| Software recognition format | NC, DXF, BMP, JPG, PNG, GCODE |
| Orario di lavoro continuo | 6 ore |
| Modalità di incisione | Grafikgravur, Datengravur, Scangravur, Konturgravur, Pixelgravur |
| Pannello di controllo | TWO TREES CNC Kit V1.3 |
| Lingua | Cinese, Inglese, Italiano, Francese, Tedesco, Russo, Portoghese, Spagnolo, Giapponese, Coreano, Turco |
| Dimensioni del pacco | Dimensioni: 760×740×213 mm |
| Peso del pacco | 20.58 kg |
| Alimentazione elettrica | 24 V 5 A 120 W |
| Sistema operativo | Finestre, MAC |
| Support CAM Software | Candle, Carveco, Artcam, Easel |
| Ambiente di lavoro | Temperature 0-40 degrees Celsius, humidity 20-60% RH |
7. Suggerimenti per l'utente
- Module Verification: Before starting any project, double-check that the correct module (CNC spindle or laser) is installed and properly secured for the task at hand.
- Regolazione di precisione: For optimal engraving and cutting results, especially after extended use, periodically check and adjust the brass nuts on the leadscrew to maintain the machine's 0.05mm precision.
- La pulizia è fondamentale: Regularly clean the work area and the spindle to prevent dust and debris buildup. The machine's dust-proof design and air duct connection facilitate this.
- La sicurezza prima di tutto: Always utilize the upgraded limit switches and be prepared to use the emergency stop button in case of any unexpected operation. When using the laser module, ensure appropriate eye protection is worn.
- Familiarità con il software: Take time to familiarize yourself with the 3.5-inch color touchscreen interface and compatible software like GRBL, LightBurn, or LaserGRBL for efficient operation and project management.
8. Garanzia e supporto
The TwoTrees TTC450 PRO CNC Router Machine is CE certified, ensuring it meets European safety, health, and environmental protection requirements.
For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the manufacturer or your authorized dealer. Provide your product model and serial number for efficient support.
