1. Introduzione
The Linshang LS237 Car Paint Thickness Gauge is a specialized instrument designed for precise automotive paint thickness inspection. This device accurately measures paint thickness on both ferrous (iron) and aluminum materials, identifies non-metallic surfaces, and intelligently detects ferrous putty and iron galvanized coatings. It features a user-friendly three-color backlight and indicator display, a long-lasting rechargeable lithium battery, and Bluetooth connectivity for seamless integration with a mobile application to generate and share inspection reports.
2. Caratteristiche principali
- Dual-Material Measurement: Measures paint thickness on both ferrous (Fe) and aluminum (Al) substrates.
- Non-Metallic Identification: Capable of identifying non-metallic surfaces.
- Ferrous Putty Detection: Intelligently identifies ferrous putty and iron galvanized coatings.
- Three-Color Display: Features a three-color backlight and indicator display, where the screen and buttons change color based on paint thickness readings for quick visual assessment.
- Batteria ricaricabile: Equipped with a 3.7V@1200mAh rechargeable lithium battery for extended use.
- Efficienza energetica: Designed for ultra-low power consumption.
- Connettività Bluetooth: Connects to a mobile application via Bluetooth for generating, saving, and sharing test reports.
- Ampio intervallo di misurazione: Offers a broad measurement range of 0.0-3500μm.
- Sonda durevole: Utilizes a robust Ruby probe tip for accurate and consistent measurements.
3. Impostazione
3.1 Disimballaggio
Carefully remove the LS237 device and any accessories from its packaging. Inspect for any signs of damage.
3.2 Ricarica del dispositivo
Before first use, fully charge the device. The LS237 supports Type-C data line charging. Connect the provided Type-C cable to the device's charging port and to a suitable USB power source. The device is designed for long endurance and energy saving.
3.3 Accensione/spegnimento
To power on the device, press and hold the Power button located on the front of the gauge. To power off, press and hold the Power button again until the display turns off.
4. Istruzioni per l'uso
4.1 Principio di misurazione
The LS237 uses two primary measurement principles:
- Ferrous (Fe) Substrates: Utilizes the Hall effect.
- Non-Ferrous (NFe) / Aluminum (Al) Substrates: Utilizes the Eddy current principle.
4.2 Esecuzione di una misurazione
Place the Ruby probe tip firmly and perpendicularly onto the surface to be measured. The device will automatically detect the substrate type (Fe, Al, or non-metal) and display the coating thickness. The measurement interval is approximately 0.5 seconds.
4.3 Interpretazione del display
The 128x48 dot matrix LCD will show the measurement in micrometers (μm) or mils (mil). The screen and buttons will illuminate in one of three colors to indicate different thickness ranges or conditions, providing a quick visual cue.
4.4 Identifying Ferrous Putty
In Fe/Al mode, the LS237 can automatically identify ferrous putty. If putty is detected, the instrument will display a specific message, such as 'Ferrous putty!', along with the thickness reading, often accompanied by a red backlight indicator.
4.5 Esamples of Measurement Applications
The LS237 can be used to test various car body types:
- Tests iron galvanized car body
- Tests iron car body
- Tests aluminum car body
- Tests non-metal car body
4.6 Using the Mobile APP
The device features Bluetooth connectivity, allowing it to operate online with a dedicated mobile application. The app enables users to generate test reports, save measurement data, and share reports easily.
5. Manutenzione
- Pulizia: Pulire il dispositivo con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
- Magazzinaggio: Conservare il dispositivo in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Cura della sonda: Keep the Ruby probe tip clean and free from debris to ensure accurate measurements. Avoid dropping or impacting the probe.
- Cura della batteria: Per una durata ottimale della batteria, evitare di scaricarla completamente frequentemente. Caricare il dispositivo regolarmente, soprattutto se si prevede di non utilizzarlo per un periodo prolungato.
6. Risoluzione Dei Problemi
6.1 Il dispositivo non si accende
- Assicurarsi che la batteria sia sufficientemente carica. Collegare il dispositivo a un caricabatterie e attendere qualche minuto prima di riprovare ad accenderlo.
- Verificare che il pulsante di accensione sia premuto correttamente.
6.2 Letture imprecise
- Ensure the probe tip is clean and free from any foreign material.
- Make sure the probe is placed firmly and perpendicularly on the measurement surface.
- Verify the surface is clean and dry.
- Check if the minimum substrate thickness requirements are met (Fe: 0.2mm / Al: 0.05mm).
6.3 Problemi di connessione Bluetooth
- Ensure Bluetooth is enabled on both the LS237 and your mobile device.
- Make sure the LS237 is within range of your mobile device.
- Restart both the LS237 and your mobile device, then try pairing again.
- Ensure the mobile application is up to date.
6.4 Charging Indicator Behavior
If the charging indicator appears to be 'running' or inconsistent, it typically signifies that the device is actively charging. A steady indicator or a specific color change usually indicates a full charge. Refer to the device's display for battery status or consult the app for detailed battery information.
7. Specifiche
| Parametro | Valore |
|---|---|
| Nome del marchio | Linshang (PINTUDY) |
| Numero di modello | LS237 |
| Certificazione | CE |
| Punta della sonda | Rubino |
| Principio di misurazione | Fe: effetto Hall / Al: correnti parassite |
| Campo di misura | 0.0-3500μm |
| Risoluzione | 0.1μm: (0μm-99.9μm); 1μm: (100μm-3500μm) |
| Precisione | ≤±(3% reading+2μm) |
| Unità | micron/mil |
| Intervallo di misurazione | Anni 0.5 |
| Area minima di misurazione | Ø = 25 mm |
| Raggio minimo di curvatura | Convesso: 5 mm / Concavo: 25 mm |
| Spessore minimo del supporto | Ferro: 0.2 mm / Alluminio: 0.05 mm |
| Lingua | English, Russian, Turkish, Ukrainian, Chinese |
| Display | 128*48 dot matrix LCD (With Backlight) |
| Alimentazione elettrica | Batteria al litio ricaricabile 3.7 V a 1200 mAh |
| Intervallo di temperatura di lavoro | -20℃-50℃ |
| Intervallo di temperatura di stoccaggio | -20℃-60℃ |
| Dimensione dell'host | 101*62*28 millimetri |
| Peso (batteria inclusa) | 76g |
| Trasferimento dati | Bluetooth |
8. Suggerimenti per l'utente
- Indicazione di carica: When charging, the battery icon on the display may show a 'running' animation. This indicates active charging. The animation will typically stop or change to a solid icon when fully charged.
- Impostazioni lingua: The device supports multiple languages including English, Russian, Turkish, Ukrainian, and Chinese. Refer to the device's menu settings to select your preferred language.
9. Garanzia e supporto
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Technical support may be available through the manufacturer's official channels. Keep your purchase receipt as proof of purchase.
