OEM PRISM 7 PRO Computer Chassis Fan Instruction Manual

1. Prodotto finitoview

The PRISM 7 PRO is a 12cm ARGB (Addressable RGB) cooling fan designed for computer chassis. It features PWM (Pulse Width Modulation) intelligent temperature control, an infinite abyss mirror design for enhanced lighting effects, and a low-noise operation. This fan is built for high performance and durability, suitable for gaming setups.

2. Informazioni sulla sicurezza

• Prima dell'installazione, assicurarsi che il computer sia spento e scollegato dalla presa a muro.
• Maneggiare il ventilatore tenendolo per il telaio per evitare di danneggiare le pale o i cavi.
• Do not force connectors; ensure correct orientation before plugging in.
• Keep away from liquids and extreme temperatures.

3. Guida all'installazione

The PRISM 7 PRO fan features a 450mm cable length, designed to reach various points within most chassis. It supports both regular and reversed airflow configurations to optimize cooling based on your chassis's air ducts.

3.1 Identificazione dei componenti

• 5V 3-pin ARGB Male Head: Used to connect to other ARGB devices in series for synchronized lighting.
• 5V 3-pin ARGB Female Head: Connects to the motherboard's 5V 3-pin ARGB header for lighting control.
• PWM 4-pin Temperature Control Male: Used to connect to other 4-pin fans in series for synchronized speed control.
• PWM 4-pin Temperature Control Female Head: Connects to the motherboard's 4-pin PWM fan header for speed control.

3.2 Installazione fisica

1. Identify the desired mounting location(s) within your computer chassis (e.g., front, top, rear, bottom).
2. Position the fan in the desired orientation. The fan supports both regular and reversed airflow designs to meet specific air duct needs and reduce wind noise.
3. Secure the fan to the chassis using appropriate screws.

3.3 Collegamenti di cablaggio

1. Connect Power and Speed Control: Connect the 4-pin PWM female head of the fan to an available 4-pin PWM fan header on your motherboard. If installing multiple fans, you can daisy-chain them using the male PWM connector on one fan to the female PWM connector on the next, then connect the last fan's female PWM connector to the motherboard.
2. Collega l'illuminazione ARGB: Connect the 5V 3-pin ARGB female head of the fan to an available 5V 3-pin ARGB header on your motherboard. If installing multiple fans, daisy-chain them using the male ARGB connector on one fan to the female ARGB connector on the next, then connect the last fan's female ARGB connector to the motherboard.

Ensure all connections are secure. Avoid connecting 5V ARGB headers to 12V RGB headers, as this can damage the LEDs.

4. Istruzioni per l'uso

Once installed and connected, the PRISM 7 PRO fan will operate automatically based on your motherboard's settings.

• PWM Intelligent Temperature Control: The fan speed will adjust dynamically based on your system's temperature, as controlled by the motherboard's PWM signal. This ensures efficient cooling and reduced noise when not under heavy load.
• Controllo dell'illuminazione ARGB: The fan's ARGB lighting can be controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync). This allows for customization of colors, patterns, and synchronization with other ARGB components.

5. Manutenzione

The PRISM 7 PRO fan is designed for long-term reliability with a service life of approximately 50,000 hours, thanks to its high-end copper alloy axis and hydraulic bearings.

• Pulizia regolare: Periodically clean the fan blades and frame to prevent dust buildup, which can impede airflow and increase noise. Use compressed air or a soft brush to gently remove dust.
• Ispezione: Occasionally check the fan for any loose connections or unusual noises.

6. Risoluzione Dei Problemi

6.1 La ventola non gira

• Verificare che il connettore PWM a 4 pin sia inserito saldamente nel connettore della ventola della scheda madre.
• Ensure the motherboard fan header is enabled in the BIOS/UEFI settings.
• Verificare che l'alimentatore funzioni correttamente.

6.2 Le luci ARGB non funzionano

• Check if the 5V 3-pin ARGB connector is securely plugged into the motherboard's 5V 3-pin ARGB header.
• Ensure you are using a 5V 3-pin ARGB header, not a 12V 4-pin RGB header. Connecting to a 12V header can damage the LEDs.
• Verifica che il software ARGB della tua scheda madre sia installato e configurato correttamente.
• Test with different ARGB modes or colors in the software.

6.3 Rumore eccessivo

• Ensure the fan is securely mounted and not vibrating against the chassis.
• Controllare che non vi siano cavi o ostruzioni che possano colpire le pale della ventola.
• Pulire eventuali accumuli di polvere sulle pale della ventola.
• Verify that the fan speed settings in your motherboard's BIOS/UEFI or software are appropriate.

7. Specifiche

8. Suggerimenti per l'utente

• Compatibilità ARGB: Ensure your motherboard has a 5V 3-pin ARGB header for lighting control. This is distinct from a 12V 4-pin RGB header.
• Quantità: The PRISM 7 PRO fans are typically sold individually. If you need multiple fans for your build, please ensure you order the correct quantity.
• Direzione del flusso d'aria: Utilize the regular and reversed airflow designs strategically to create optimal positive or negative pressure within your PC case, improving overall cooling efficiency.

9. Garanzia e supporto

Per qualsiasi domanda relativa al prodotto, supporto tecnico o richiesta di garanzia, contattare direttamente il venditore o il produttore. Conservare la ricevuta d'acquisto come prova d'acquisto.