SUNLU UV Resin Curing Box RC II User Manual

1. Introduzione

The SUNLU UV Resin Curing Box RC II is a state-of-the-art device designed for efficiently curing photopolymer resin models produced by SLA/DLP/LCD 3D printers. Featuring 360° fast curing, a large curing space, and an integrated air drying function, it ensures optimal post-processing for your 3D prints. This manual provides essential information for the safe and effective use of your curing box.

SUNLU UV Resin Curing Box RC II with key features highlighted — Figure 1: SUNLU UV Resin Curing Box RC II overview with features like 360° curing, large size, air drying, removable turntable, 42W power, and large load-bearing capacity.

2. Caratteristiche principali

Large Curing Space: Offers a generous 200*200*250mm internal curing space, accommodating various model sizes.
Fast Air Drying: Incorporates a self-developed patented air duct technology, reducing model air drying time by up to 60% compared to natural air drying.
Three Adjustable Wind Speeds: Customize drying with low, medium, and high wind speed settings to suit different materials and projects.
360° Curing Surround: Equipped with 20 UV lamps (4 on top, 4 on the bottom, and 12 on the sides) for uniform, all-round irradiation and thorough curing.
Removable Turntable: The transparent turntable is easily removable for convenient cleaning and maintenance.
Solid Weight-bearing: Features a roller support design with a maximum load capacity of 2kg, suitable for large-volume models.
High Power Curing: Boasts a 42W power output, 42% higher than previous generations, ensuring deep light penetration and enhanced curing effects.
Progettazione integrata: All-in-one unit, ready to use without complex installation.

SUNLU UV Resin Curing Box RC II with features listed — Figure 2: Visual representation of the SUNLU RC II Curing Box highlighting its key features.

3. Contenuto della confezione

All'apertura della scatola, assicurarsi che siano presenti tutti i seguenti elementi:

SUNLU UV Resin Curing Box RC II Unit
Adattatore di alimentazione
Giradischi rimovibile
Manuale di istruzioni

Video 1: Unboxing and initial setup of the SUNLU RC-2 Curing Box, showing package contents and basic assembly.

4. Istruzioni per l'installazione

Disimballaggio: Carefully remove the curing box and all accessories from the packaging.
Installazione del giradischi: For first-time use, install the transparent turntable inside the curing box. Place it securely on the central rotating mechanism.
Collegamento elettrico: Plug the power adapter into the designated port at the back of the curing box. Connect the other end to a suitable power outlet. The indicator light on the front panel will illuminate, indicating power is applied.

Diagram showing external and internal dimensions of the curing box and maximum load capacity — Figure 3: External dimensions (245*235*305mm), internal dimensions (230*230*250mm), and maximum load capacity (2KG) of the curing box.

5. Guida operativa

Accensione: Short press the main control button (usually a rotary knob) on the front panel to turn on the device. The display will show a default time, e.g., "15:00".
Place Model: Open the front door and carefully place your 3D resin model in the center of the turntable. Close the door securely.
Seleziona modalità: Long press the main control button to cycle through the available modes:
- Mode 1 (DR light on): Air drying only.
- Mode 2 (UV light on): UV curing only.
- Mode 3 (DR+UV light on): Air drying and UV curing simultaneously (default mode).
Regola la durata: Once a mode is selected, rotate the main control button to adjust the desired operation duration. The time can typically be set from 1 to 99 minutes.
Inizia l'operazione: Short press the main control button again to start the selected process. The timer will begin counting down.
Adjust Wind Speed (Air Drying Mode): If you are in Mode 1 (Air drying only) or Mode 3 (Air drying + Curing), you can adjust the wind speed by rotating the main control button during operation. Options typically include Low, Medium, and High.
Checking Drying Status: During air drying mode, you can open the door to check the model's drying status at any time.
Nota importante sulla sicurezza: Do NOT open the door during UV curing mode operation to avoid exposure to UV light.
Completamento: The device will automatically stop once the set time has elapsed.

Control panel showing time adjustment, wind speeds, and three operation modes — Figure 4: The control panel with indicators for time adjustment (1-99 mins), three adjustable wind speeds, and three operation modes (DR only, UV only, DR+UV).

Diagram showing the 20 UV lights configuration for 360 degree curing — Figure 5: Illustration of the 20 UV lights exposure for 360° UV light curing, with 4 lights on top, 12 on the sides, and 4 at the bottom, along with a high translucency turntable.

Comparison of drying times for models cleaned with water/detergent vs. alcohol — Figure 6: Efficiency comparison showing models cleaned with water or detergent drying 50% faster (60 mins vs. 120 mins naturally), and models cleaned with alcohol or isopropyl alcohol drying 60% faster (12 mins vs. 60 mins naturally) with the Resin UV Curing Box II.

6. Manutenzione

Pulizia: Regularly clean the interior of the curing box and the turntable. The turntable is removable for easier cleaning. Use a soft, dry cloth. For resin residue, use a small amount of isopropyl alcohol.
UVLamp Cura: Ensure the UV lamps are free from dust or resin splashes to maintain optimal curing performance. Do not touch the UV lampdirettamente.
Magazzinaggio: When not in use, store the curing box in a cool, dry place away from direct sunlight.
Disconnessione dell'alimentazione: Scollegare sempre il dispositivo dalla fonte di alimentazione prima di pulirlo o di eseguire qualsiasi operazione di manutenzione.

7. Risoluzione Dei Problemi

Problema	Possibile causa	Soluzione
Il dispositivo non si accende	Power adapter not connected or faulty; Power outlet issue	Assicurarsi che l'adattatore di alimentazione sia collegato correttamente. Provare una presa di corrente diversa. Verificare che l'adattatore non sia danneggiato.
UV lights not turning on	Incorrect mode selected; Door not fully closed	Ensure UV curing mode (Mode 2 or 3) is selected. Verify the door is completely closed.
Model not curing properly	Insufficient curing time; Resin type incompatibility; UV lamps dirty or faulty	Increase curing duration. Ensure resin is compatible with UV curing. Clean UV lamps. Contact support if lamps are faulty.
Air drying not effective	Low wind speed setting; Blocked air vents	Increase wind speed. Check and clear any obstructions from air vents.

8. Specifiche

Parametro	Valore
Modello	RC-2
Peso netto	2.4KG
Dimensioni esterne	Dimensioni: 245 x 235 x 305 mm
Dimensioni interne	Dimensioni: 230 x 230 x 250 mm
Dimensione massima di polimerizzazione	Dimensioni: 200 x 200 x 250 mm
Number of UV Lamps	20 (4 top, 4 bottom, 12 side)
Colore	Nero
Energia	42 L
Ingresso scheda	CA 100 V ~ 240 V 50 Hz/60 Hz
Uscita adattatore	DC 12V±0.2V 3.5A

9. Suggerimenti per l'utente

Resin Compatibility: The SUNLU UV Resin Curing Box RC II is generally compatible with various UV resins, including those used for molding applications like jewelry (e.g., earrings). Always check the resin manufacturer's recommendations for curing times and UV wavelength compatibility (this unit uses 450nm UV light).
Optimal Curing: For best results, ensure your models are thoroughly cleaned of uncured resin before placing them in the curing box.
Ventilazione: While the device has an air drying function, ensure adequate room ventilation when working with resin, as fumes can be present.

10. Garanzia e supporto

For warranty information, technical support, or service inquiries, please refer to the official SUNLU websito o contatta il tuo rivenditore. Conserva la ricevuta d'acquisto come prova d'acquisto.

	Resina standard SUNLU 14K: resina per stampa 3D ad alta precisione - Caratteristiche, specifiche e utilizzo Scopri la resina standard SUNLU 14K, ideale per la stampa 3D di modelli ad alta precisione, la scultura di teste e miniature dettagliate. Esplora le sue caratteristiche, le proprietà meccaniche e termiche, i parametri di stampa consigliati e le linee guida di sicurezza.
	Resina standard SUNLU 14K: scheda tecnica e guida all'uso Specifiche tecniche complete, caratteristiche, applicazioni, parametri di stampa e linee guida di sicurezza per la resina standard SUNLU 14K, un materiale per la stampa 3D ad alta precisione.
	Contenitore per polimerizzazione UV in resina SUNLU RC-2: Manuale utente e guida operativa Manuale utente completo per il contenitore per polimerizzazione UV in resina SUNLU RC-2. Scopri le caratteristiche del prodotto, le modalità di funzionamento (polimerizzazione, asciugatura), la risoluzione dei problemi e la manutenzione dei tuoi modelli in resina stampati in 3D.
	Catalogo di filamenti, resine e accessori per stampa 3D SUNLU Esplora l'ampio catalogo di prodotti SUNLU, che comprende un'ampia gamma di filamenti per la stampa 3D, resine fotopolimeriche, componenti elettronici ausiliari, penne per la stampa 3D e accessori. Per ogni articolo sono fornite specifiche dettagliate, caratteristiche del prodotto e parametri di stampa.
	Guida utente della stampante 3D SUNLU T3 - Configurazione, funzionamento e risoluzione dei problemi Manuale utente completo per la stampante 3D SUNLU T3, che copre configurazione, installazione, funzioni dell'interfaccia, livellamento, caricamento del filamento, software di slicing (Cura), stampa, risoluzione dei problemi (FAQ) e assistenza post-vendita.
	SUNLU FilaDryer S2: Manuale utente e guida per l'asciugatura dei filamenti Manuale utente completo per SUNLU FilaDryer S2, che descrive in dettaglio configurazione, funzionamento, impostazioni personalizzate, risoluzione dei problemi e suggerimenti per un'asciugatura ottimale dei filamenti per la stampa 3D. Scopri come essiccare PLA, PETG, ABS e altro ancora.

SUNLU RC II