Introduzione
This manual provides essential information for the safe and effective use of your Phantom 2 Vision 5.8GHz Remote Control Transmitter, Model PVT581. This transmitter is designed for controlling the DJI Phantom 2 V+ Drone. Please read this manual thoroughly before operating the device to ensure proper functionality and to prevent damage.
Prodotto finitoview
The PVT581 remote control transmitter features dual joysticks for precise drone control, along with various switches for different functions. A power button and indicator light are located on the front panel for easy operation.
Impostare
1. Installazione della batteria
- Locate the battery compartment on the rear of the transmitter.
- Aprire il coperchio del vano batterie.
- Inserire quattro (4) batterie AA, assicurandosi della corretta polarità (+/-).
- Chiudere saldamente il coperchio del vano batterie.
2. Accensione iniziale
Press and hold the power button on the front of the transmitter until the power indicator light illuminates. A green light typically indicates the device is powered on and ready for operation.
Istruzioni per l'uso
1. Abbinamento con il drone
Before first use, ensure the transmitter is properly paired with your DJI Phantom 2 V+ Drone. Refer to your drone's specific manual for detailed pairing procedures, as this process can vary.
2. Controlli di base
- Joystick sinistro: In genere controlla l'acceleratore (su/giù) e l'imbardata (rotazione sinistra/destra).
- Joystick destro: Typically controls pitch (forward/backward) and roll (left/right translation).
- Switches (S1, S2): These switches are programmable and control various flight modes or functions on your drone. Consult your drone's manual for specific assignments.
3. Spegnimento
To power off the transmitter, press and hold the power button until the indicator light turns off.
Manutenzione
- Pulizia: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using harsh chemicals or solvents.
- Magazzinaggio: Conservare il trasmettitore in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Cura della batteria: Rimuovere le batterie se il trasmettitore non viene utilizzato per un periodo prolungato, per evitare perdite e danni.
- Ispezione: Regularly inspect joysticks and switches for any signs of wear or damage.
Risoluzione dei problemi
- Il trasmettitore non si accende: Check if batteries are installed correctly and are not depleted. Replace with fresh batteries if necessary.
- No connection to drone: Ensure both the transmitter and drone are powered on. Verify that the pairing process has been completed successfully. Check for any obstructions or excessive distance between the transmitter and drone.
- Controllo irregolare: Ensure there is no interference in the operating environment. Check for any physical damage to the joysticks or switches.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Modello n. | PVT581 |
| Potenza di uscita | 11dBm |
| Frequenza operativa | 5.728-5.850 GHz |
| Temperatura di esercizio | -5~+75°C |
| Alimentazione elettrica | 6V (four 5# AA batteries) |
| Corrente di lavoro | <70mA |
| Identificazione FCC | S53-201309581 |
| Materiale | Materiale composito |
| Brand Name (Transmitter) | RCMOY |
| Età consigliata | 14+ anni |
| Batterie incluse | NO |
Suggerimenti per l'utente
Non sono stati forniti suggerimenti specifici per l'utente da parte di reviews or Q&A for this product at this time. Always ensure your drone's firmware is up to date for optimal performance and compatibility with the transmitter.
Garanzia e supporto
For warranty information and technical support, please contact the original seller or the manufacturer (DJI for the drone, RCMOY for the transmitter) directly. Keep your purchase receipt as proof of purchase.
