1. Prodotto finitoview
The LASER TREE K1 MAX is a high-power diode laser engraving and cutting machine designed for DIY enthusiasts and small businesses. It features an adjustable 60W laser module, offering versatile power options for various materials and applications. The machine boasts an exceptionally large working area of 800x600mm and a maximum engraving speed of 20000mm/min, enabling efficient and precise work.
Caratteristiche principali:
- High Power Laser Module: Built-in 12pcs 5.5W beam compressed laser diodes, delivering 60W+ optical power.
- Potenza regolabile: Easily switch between 20W, 40W, and 60W for engraving and cutting tasks.
- Ampia area di lavoro: 800x600mm workspace for extensive projects.
- Alta velocità di incisione: Up to 20000mm/min for rapid processing.
- Accurate Focus: Ensures precise and clean results.
- Assistenza aerea: Improves cutting performance and surface cleanliness.
- Cable Drag Chain: Manages cables for a tidy and safe workspace.
- Incisione offline della carta TF: Allows operation without a continuous computer connection.
- Red Cross Line Locating: Aids in precise material positioning.
- Rilevamento e protezione dell'inclinazione della macchina: Enhances safety by alarming if the machine is tilted during operation.
Dimostrazione del prodotto:
Video: Comparison of K1 MAX 60W engraving and cutting capabilities against a 40W laser engraver.
2. Informazioni sulla sicurezza
WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always wear appropriate laser safety goggles when operating the machine.
- Protezione degli occhi: Always wear certified laser safety goggles that block the laser's wavelength (450nm) when the laser is active.
- Ventilazione: Operate the machine in a well-ventilated area or use an exhaust system to remove fumes and smoke generated during engraving/cutting.
- Rischio di incendio: Laser cutting can ignite flammable materials. Never leave the machine unattended during operation. Keep a fire extinguisher nearby.
- Sicurezza dei materiali: Only engrave or cut materials that are safe for laser processing. Avoid materials that produce toxic fumes or can catch fire easily.
- Stabilità della macchina: Ensure the machine is placed on a stable, level surface. The built-in tilt detection system will alert you if the machine is moved or tilted during operation.
- Bambini e animali domestici: Tenere bambini e animali domestici lontani dall'area operativa.
- Arresto di emergenza: Familiarizzare con la posizione e la funzione del pulsante di arresto di emergenza.
3. Contenuto della confezione
The LASER TREE K1 MAX 60W package includes the following components:
Immagine: dettagliata view of all components included in the LT-K1 Max 60W package.
- X-Axis Assembly x1
- Y-Axis Assembly x2
- Front Frame x1
- Rear Frame x1
- X-Axis Pulley Fixing Plate x1
- Support Feet x3
- Main Control Box x1
- Y-Axis Timing Belt x2
- Main Cable x1
- Adattatore di alimentazione x1
- Cavo CA x1
- Lettore di schede x1
- TF Card x1
- x1 cavo USB
- Laser Module x1 (60W)
- Spare Laser Protective Lens x2
- Air Assist Pump x1
- Honeycomb Panel x1
- Desktop Protection Plate x1
- M4*30 Adjusting Screw x2
- T-Nut x4
- M4*5 Fasten Screw x4
- M4*18 Round Screw x1
- M5*10 Round Screw x1
- M5*20 Round Screw x16
- M5*20 Flat Screw x1
- Limiting Column Sleeve x1
- Pacchetto materiale x1
- Air Pump User Manual x1
- K1 Max User Manual x1
- Square Pad x4
- L-Allen Wrench x4 (2mm, 2.5mm, 3mm, 4mm)
- 8-10 Open Spanner x1
- Fascette x1
- Spazzola di pulizia x1
4. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | LT-K1-MAX-60W |
| Nome del marchio | Albero laser |
| Origine | Cina continentale |
| Area di lavoro | 800 x 600 mm (31.50 x 23.62 pollici) |
| Velocità massima di incisione | 20000 mm/min |
| Potenza ottica laser | 60W+ (Adjustable 20W/40W/60W) |
| Dimensione spot (20W) | 0.15 x 0.15 millimetri |
| Dimensione spot (40W) | 0.15 x 0.18 millimetri |
| Dimensione spot (60W) | 0.15 x 0.25 millimetri |
| Lunghezza focale | 40 millimetri |
| Lunghezza d'onda | 450 nm (± 10 nm) |
| Potenza in ingresso | Corrente continua 24V 10A |
| Tipo di laser | Laser a diodi |
| Dimensioni | Dimensioni: 965 mm x 895 mm x 198 mm |
| Peso | 17 kg |
| Durata | 20000 ore |
Cutting Performance (Power: 100%):
Image: Cutting depth capabilities for 20W, 40W, and 60W laser modules on materials like plywood, pine wood, MDF, and acrylic.
- Modulo 20W: Can cut 12mm Plywood (160mm/min), 15mm Pine Wood (460mm/min), 5mm MDF (15mm/min), 15mm Acrylic (15mm/min).
- Modulo 40W: Can cut 15mm Plywood (200mm/min), 20mm Pine Wood (130mm/min), 9mm MDF (150mm/min), 20mm Acrylic (30mm/min).
- Modulo 60W: Can cut 20mm Plywood (170mm/min), 40mm Pine Wood (50mm/min), 9mm MDF (400mm/min), 30mm Acrylic (30mm/min).
5. Guida all'installazione
Follow these steps to assemble and set up your LASER TREE K1 MAX laser engraver:
- Disimballare i componenti: Carefully remove all items from the packaging and verify against the packing list.
- Montare il telaio: Connect the X-Axis Assembly, Y-Axis Assemblies, Front Frame, and Rear Frame according to the included K1 Max User Manual. Ensure all screws (M5*20 Round Screw, M4*5 Fasten Screw, etc.) are securely tightened.
- Install Support Feet: Attach the three Support Feet to the base of the machine.
- Install Y-Axis Timing Belts: Secure the Y-Axis Timing Belts as per the manual's instructions.
- Mount Main Control Box: Attach the Main Control Box to the designated location on the frame.
- Installare il modulo laser: Carefully mount the 60W Laser Module onto the X-axis assembly. Ensure it is properly seated and secured.
- Collegare i cavi: Connect the Main Cable, Power Adapter, and AC Cable. Route all cables neatly using the provided Cable Ties and the Cable Drag Chain.
- Set up Air Assist: Connect the Air Assist Pump to the laser module and power supply as instructed in the Air Pump User Manual.
- Place Honeycomb Panel: Position the Honeycomb Panel on your work surface, underneath the laser's working area, to protect your desktop and improve cutting results. Use the Desktop Protection Plate if needed.
- Installazione del software: Install the recommended laser control software (e.g., LightBurn, LaserGRBL) on your computer. Refer to the software's documentation for installation and basic usage.
- Accensione iniziale: Connect the power adapter and turn on the machine. Observe for any unusual noises or movements.
6. Istruzioni per l'uso
6.1. Preparazione del materiale
- Place your material on the Honeycomb Panel.
- Use the Red Cross Line Locating feature to accurately position your material.
6.2. Messa a fuoco del laser
Achieving accurate focus is crucial for optimal engraving and cutting results. Refer to the K1 Max User Manual for detailed focusing procedures, typically involving adjusting the laser module height until the laser spot is at its smallest point on the material surface.
6.3. Adjusting Laser Power (20W/40W/60W)
The K1 MAX allows you to switch between 20W, 40W, and 60W power modes directly on the laser module. Select the appropriate power based on your material and desired outcome. Higher power is generally used for cutting thicker materials, while lower power is suitable for engraving and fine details.
Image: Visual representation of adjustable laser power settings and other features.
6.4. Using Air Assist
Connect and activate the Air Assist Pump when cutting or engraving materials that produce significant smoke or residue. Air assist helps to blow away debris, resulting in cleaner cuts and reduced charring.
6.5. Offline Engraving (TF Card)
Per eseguire l'incisione offline:
- Prepara il tuo progetto file using compatible software and save it to the TF card.
- Insert the TF card into the Main Control Box.
- Seleziona il tuo file using the machine's controls (refer to the manual for specific navigation).
- Start the engraving process without needing a connected computer.
6.6. Processo di incisione e taglio
- Carica il tuo disegno file into the laser control software or select it from the TF card.
- Set the appropriate power, speed, and passes based on your material and desired effect. Refer to the cutting performance tables in the Specifications section for guidance.
- Ensure all safety precautions are in place (goggles, ventilation).
- Initiate the engraving/cutting job. Monitor the process closely.
Immagine: Visual examples of the K1 MAX's ability to cut various materials in a single pass.
7. Manutenzione
Una manutenzione regolare garantisce la longevità e le prestazioni ottimali del vostro incisore laser.
- Pulisci la lente laser: Pulire periodicamente la lente laser con un panno morbido e privo di lanugine e una soluzione detergente per lenti per mantenere la qualità del raggio.
- Pulire binari e cinghie: Keep the guide rails and timing belts free from dust and debris. Lubricate the rails as recommended in the manual.
- Clean Honeycomb Panel: Remove accumulated debris and cut pieces from the honeycomb panel to ensure proper airflow and prevent fire hazards.
- Controllare le connessioni: Regularly inspect all electrical and mechanical connections for tightness and wear.
- Aggiornamenti software: Keep your laser control software and firmware updated to the latest versions.
8. Risoluzione Dei Problemi
Problemi comuni e soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il laser non si accende o ha un'uscita debole | Loose cable, dirty lens, incorrect power setting, laser module fault. | Check all cable connections. Clean the laser lens. Verify power settings in software and on the module. Contact support if the issue persists. |
| Scarsa qualità di incisione/taglio | Incorrect focus, wrong speed/power settings, material issues, dirty lens. | Re-focus the laser. Adjust speed and power settings based on material. Ensure material is flat and clean. Clean the laser lens. |
| La macchina non si muove o si muove in modo irregolare | Loose belts, motor cable disconnected, software error, obstruction on rails. | Check and tighten timing belts. Verify motor cable connections. Restart software and machine. Clear any obstructions from the rails. |
| Tilt alarm beeps during operation | Machine was moved or is unstable. | Ensure the machine is on a stable, level surface. Avoid bumping or moving the machine during operation. |
| Offline engraving not working | Scheda TF non inserita correttamente, danneggiata file, unsupported file formato. | Ensure TF card is fully inserted. Re-save the file to the TF card. Check the file format compatibility with the machine. |
9. Suggerimenti per l'utente
- Rotary Attachment: The K1 MAX is designed for flat material processing. If you intend to engrave cylindrical objects like mugs, you may need to purchase a compatible rotary attachment separately. Check with the manufacturer or seller for recommended accessories.
- Prove sui materiali: Prima di iniziare un progetto di grandi dimensioni, eseguire sempre piccole incisioni o tagli di prova su materiale di scarto per perfezionare le impostazioni di potenza e velocità.
- Air Assist for Cleanliness: For cleaner cuts and to minimize charring, especially on wood and acrylic, always use the air assist feature.
- Organizzazione dello spazio di lavoro: Keep your workspace tidy and free of clutter to prevent accidents and ensure smooth machine operation.
10. Garanzia e supporto
Garanzia:
All LASER TREE products come with a Garanzia di 1 anno dalla data di acquisto, coprendo difetti di fabbricazione e malfunzionamenti in condizioni di normale utilizzo. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.
Assistenza clienti:
For any technical assistance, troubleshooting, or warranty inquiries, please contact the seller or manufacturer directly. All emails will typically be answered within 24 hours.
- Venditore: Laser Tree Retails Store
- Informazioni sui contatti: Refer to your purchase platform or the official Laser Tree websito per i contatti.
