Introduzione
The Speedybee F405 V5 Stack BLS 55A is an integrated Flight Controller (FC) and Electronic Speed Controller (ESC) solution designed for FPV drones. This stack combines a powerful F405 V5 FC with a 32-bit 55A 4-in-1 ESC, offering robust performance, wireless tuning capabilities, and advanced features for both recreational and competitive FPV pilots. This manual provides essential information for the proper installation, configuration, and operation of your Speedybee F405 V5 Stack.
Contenuto della confezione
The Speedybee F405 V5 Stack is available in Standard and Deluxe editions. Please verify your package contents against the lists below.
Contenuto della confezione dell'edizione standard
- Controllore di volo per aeromodelli SpeedyBee F405 V5 x1
- SpeedyBee OX32 55A 32 55A 4-in-1 Model Aircraft ESC x1
- Cavo connettore per pila di aeromodelli x1 (SH1.0 10 pin*25 mm)
- Cavo connettore per pila di aeromodelli x1 (SH1.0 10 pin*75 mm)
- Cavo connettore unità aerea DJI x1 (SH1.0 6 pin*80 mm)
- GPS 6pin Connector Cable + 6pin SH1.0 Terminal x1 (SH1.0 6pin*120mm)
- Cavo connettore GPS a 4 pin + terminale SH1.0 a 4 pin x1 (SH1.0 a 6 pin a SH1.0 a 4 pin*120 mm)
- Cavo connettore ricevitore a 4 pin x1 (SH1.0 4 pin*100 mm)
- Cavo di alimentazione XT60 x1 (120 mm)
- Viti di montaggio per pila di aeromobili modello M3 x4 (30 mm)
- Dadi esagonali in nylon M3 x5
- Rondelle in silicone nero M3 x5
- Tubo termorestringente per condensatore x2
- Condensatore solido 35V 1000uF x1
- Guida rapida per aeromodelli Stack x1
- Coperture in silicone FC per aeromodelli x5
- Coperture in silicone per ESC per aeromodelli x5
Deluxe Edition Additional Contents
- Strumento di protezione da cortocircuito x1
- Scheda di pratica di saldatura x1
- USB Extension Board x1
- Scheda di espansione di potenza x4
- Buzzer Red & Black Wires x1 (100mm)
- Cicalino attivo x1
- Type-C Extension Module 4pin Connector Cable x1
- Modulo di estensione di tipo C x1
Specifiche
SpeedyBee F405 V5 30.5x30.5mm Model Aircraft Flight Controller
| Nome del prodotto | SpeedyBee F405 V5 30.5x30.5mm Model Aircraft Flight Controller |
|---|---|
| MCU | STM32F405 |
| IMU (Giroscopio) | ICM42688 |
| Tipo di Porta USB | Nuova interfaccia Type-C |
| Barometro | SPA06-003 |
| Chip OSD | AT7456E |
| Sintonizzazione Bluetooth completa | Supportato. Connessione tramite l'app SpeedyBee per l'aggiornamento del firmware FC e la regolazione dei parametri. |
| Aggiornamento del firmware FC wireless | Supportato |
| Collegamento dell'unità aerea DJI | Supporta la connessione diretta a 6 pin o la connessione tramite saldatura |
| Scatola nera | Chip di archiviazione integrato da 16 MB supportato |
| Ingresso volumetage | Batteria 3-6S LiPo |
| Uscita BEC indipendente da 5 V | 9 groups (4x +5V pads on front, 1x BZ+ buzzer pad, and 4x +5V pads at the corners for external LEDs). Total output current: 1.5A. |
| Uscita BEC indipendente da 9 V | 2 gruppi (1 pad da 9 V sul lato anteriore, 1 uscita da 9 V in un connettore sul retro). Corrente di uscita totale: 3 A. Supporta il controllo remoto di accensione/spegnimento PINIO. |
| MCU e potenza del giroscopio | LDO indipendente |
| Uscita 3.3 V | 1 group (1x 3.3V pad on front) |
| Uscita 4.5 V | 3 groups (3x 4.5V pads on front). Can power receiver and GPS when FC is powered via USB. Max output current: 1A. |
| Segnale ESC | Pad M1-M4 e connettore a 10 pin sul retro |
| Segnale servo | Pastiglie S5-S6 sulla parte anteriore |
| Ingresso telemetria ESC | Supportato (UART5) |
| Betaflight Camera Tuning Pad | Supportato (pad CC sulla parte anteriore) |
| I2C | Supportato (connettore GPS + pad) |
| UART | UART1 (Bluetooth); UART2 (pad anteriori per ricevitore); UART3 (pad DJI VTX + SH1.0 posteriore a 6 pin); UART4 (pad GPS + SH1.0 anteriore a 6 pin); UART5 (TLM); UART6 (pad ricevitore + SH1.0 posteriore a 4 pin) |
| ST LED Pad | Supportato, sui pad G/5V/LED anteriori; controllato dal firmware FC |
| Strisce LED Meteor | Supportato. Passa dalla modalità SB-LED a ST-LED tramite il pulsante BOOT o l'app. In modalità SB-LED, controllato dal chip Bluetooth ESP32. |
| Tamponi cicalino | Supportato |
| Pulsante di avvio | [A] Hold BOOT while powering on to force DFU mode for flashing. [B] When powered and in standby, short-press cycles LED display modes; long-press switches SB-LED/ST-LED. In ST-LED mode, LED1-LED4 are controlled by FC firmware. |
| Pastiglie RSSI | Supportato |
| SmartPort | Non supportato |
| Firmware FC supportato | Betaflight, iNAV, Ardupilot (Preloaded with Betaflight 4.5.2) |
| Nome di destinazione del firmware | SPEEDYBEEF405V5 |
| Versione del configuratore | Betaflight 10.10.0 |
| Fori di montaggio | 30.5 × 30.5 mm (Ø4 mm), apertura laterale |
| Dimensioni | 39 mm (L) × 39 mm (L) × 4.9 mm (A) |
| Peso | 8.1g |
SpeedyBee OX32 55A 30.5x30.5 4-in-1 ESC
| Nome del prodotto | SpeedyBee OX32 55A 30.5x30.5 4-in-1 ESC |
|---|---|
| Firmware predefinito | OX32 |
| Corrente continua | 55A (per canale) / 220A (4 in 1) |
| Corrente massima | 70A (per canale) / 280A (4 in 1) |
| Diodo di protezione TVS | Sì (integrato) |
| Condensatore esterno | 1000μF Solid Capacitor (included in package) |
| Protocollo ESC/motore | DSHOT300/600 |
| Ingresso volumetage | 3-6S LiPo |
| Potenza in uscita | VBAT |
| Sensore di corrente | Supportato |
| Ingresso telemetria ESC | Supportato |
| Fori di montaggio | 30.5 × 30.5 mm (Ø4 mm), apertura laterale |
| Dimensioni | 40.9 mm (L) × 44.9 mm (L) × 8.0 mm (A) (incluso dissipatore di calore) |
| Peso | 19.1g |
| Nota del misuratore di corrente | Supportato (Scala=27, Offset=-2644) |
General Product Attributes
| Attributo | Valore |
|---|---|
| Sostanza chimica altamente preoccupante | Nessuno |
| è elettrico | Nessuna batteria |
| Quantità | 1 pezzi |
| Passo | Viti |
| È una batteria/alimentatore? | N |
| È un caricabatterie/adattatore? | N |
| Le batterie sono incluse? | NO |
| Parametri tecnici | valore 2 |
| Per tipo di veicolo | Aerei |
| Forniture di utensili | Classe assemblata |
| Attributi della trazione integrale | speedybee f405 v4 55a stack |
| Periferiche/dispositivi di controllo remoto | ESC |
| Parti/accessori di aggiornamento | speedybee f405 v3 50a stack |
| Ricambi e accessori RC | giroscopi |
| Materiale | Materiale composito |
| Origine | Cina continentale |
| Età consigliata | 14+ anni |
| Utilizzo | Veicoli e giocattoli telecomandati |
Dimensioni
Impostare
Mounting the Stack
The F405 V5 Stack features 30.5 x 30.5mm mounting holes with a Ø4mm side opening. Use the provided M3 mounting screws, hex nylon nuts, and silicone washers for secure installation. The PCB-mounted frame and pad redesign offer easier soldering and a more compact installation than previous generations.
Wiring Diagram (Soldered Connection)
Refer to the detailed wiring diagram for soldered connections. Ensure all connections are made correctly to avoid damage to the components.
Motor and Power Connection
Connect your motors to the ESC and the XT60 power cable to the designated pads. It is strongly recommended to use the included 1000uF solid capacitor to protect the AIO flight controller from instantaneous voltage picchi quando acceso.
Flight Controller Layout
Familiarize yourself with the layout of the F405 V5 Flight Controller and the BLS 55A 4-in-1 ESC to ensure correct connections for peripherals such as FPV camera, buzzer, GPS, receiver, and VTX.
Istruzioni per l'uso
Wireless Tuning 2.0 via SpeedyBee App
The Speedybee F405 V5 Stack features Wireless Tuning 2.0, allowing full configuration via the SpeedyBee App on your smartphone. This eliminates the need for a computer on-site for tuning and firmware updates.
- Aggiornamenti del firmware: Perform APP-based wireless firmware updates with a one-click unbrick feature.
- Regolazione dei parametri: Adjust all flight controller parameters wirelessly.
- Controllo LED: Configure and control the X4 Meteor LED strips and multicolor battery LEDs via the app.
BOOT Button Functionality
- Modalità DFU: Hold the BOOT button while powering on to force the FC into DFU mode for flashing firmware via USB.
- LED Mode Cycle: When powered and in standby, short-press the BOOT button to cycle through LED display modes.
- LED Mode Switch: Long-press the BOOT button to switch between SB-LED and ST-LED modes. In ST-LED mode, LED1-LED4 are controlled by the FC firmware.
Interruttore intelligente integrato
The integrated smart switch allows you to easily control the 5V output via a remote controller using the configurator. This delivers a steady 1.5A current and supports various applications without needing an extra electronic switch.
Manutenzione
Rivestimento conforme
Both the flight controller and ESC come with a factory-applied conformal coating. This provides extra protection against moisture, solder residue, plant sap, and other harsh environmental conditions, enhancing the durability and longevity of your stack.
Porta USB di tipo C incassata
The recessed Type-C USB port is designed to efficiently prevent USB detachment under extreme conditions. Its 2mm lower profile also makes battery installation and maintenance easier.
Risoluzione dei problemi
- Nessun potere: Double-check all power connections, especially the XT60 cable and the solid capacitor. Ensure the LiPo battery is charged and connected correctly (3-6S).
- Nessun segnale ai motori: Verify motor connections to the ESC. Check ESC/Motor protocol settings in Betaflight (DSHOT300/600). Ensure ESC firmware (OX32) is correctly flashed.
- FC Not Connecting to App/PC: Ensure Bluetooth is enabled on your device for app connection. For PC connection, ensure the correct USB drivers are installed and try holding the BOOT button to enter DFU mode if flashing firmware.
- Volo instabile: Review your Betaflight/iNAV/Ardupilot configuration. Ensure the ICM-42688 Gyroscope is properly calibrated. Check for any loose connections or physical damage to the drone frame or propellers.
- LED non funzionanti: Check LED strip connections. Ensure the correct LED mode (SB-LED/ST-LED) is selected via the BOOT button or SpeedyBee App. Verify LED settings in FC firmware.
Suggerimenti per l'utente
- Compatibilità firmware: While the stack is preloaded with Betaflight, future support for iNAV and ArduPilot is planned. Always check the latest SpeedyBee documentation for firmware compatibility and flashing instructions.
- AmpValutazioni dell'era: The product is rated for 55A continuous current. When comparing with other products, ensure you are comparing continuous current ratings, as peak current ratings can be higher (e.g., 70A peak for this ESC). This can influence pricing and performance expectations.
- Deluxe Edition Tools: If you have the Deluxe Edition, utilize the included Soldering Practice Board to hone your soldering skills before working on the actual flight stack. The Short-Circuit Protection Tool can be invaluable for safely testing your build.
- Convenienza senza fili: Leverage the SpeedyBee App for all your tuning and configuration needs. It significantly simplifies field adjustments and firmware updates, reducing the need for a laptop.
- Rivestimento conforme: Although factory-applied, consider inspecting the coating periodically, especially after crashes or exposure to harsh elements, to ensure continued protection.
Garanzia e supporto
For warranty claims, technical support, or further assistance, please contact your retailer or the official Speedybee support channels. Keep your proof of purchase for any warranty-related inquiries. Detailed support resources, including updated firmware and software, can often be found on the official Speedybee websito.
