BARROW DARIDP-30 360 Integrated Radiator, Pump, and Fan User Manual

1. Introduzione

The BARROW DARIDP-30 360 is a highly integrated water cooling solution designed for ITX cases, aiming to save internal space while providing efficient cooling. This unit combines a water pump, radiator, and fans into a single, compact hardware component. It features a powerful 17W high-lift water pump, an optimized pump chamber structure for superior water flow, and a dual-mode speed control function for flexible operation.

2. Informazioni sulla sicurezza

• Always disconnect power to your computer before installation or maintenance.
• Assicurarsi che tutti i raccordi siano ben serrati per evitare perdite.
• Use only approved coolants for water cooling systems. Mixing incompatible coolants can lead to corrosion or system failure.
• Avoid bending or kinking tubing excessively, as this can restrict flow and reduce cooling performance.
• Keep the unit away from direct sunlight and high temperatures.
• Do not operate the pump dry. Ensure the system is filled with coolant before powering on.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti e integri al momento del disimballaggio:

• 1x BARROW DARIDP-30 360 Integrated Radiator, Pump, and Fan Unit
• 1x Manual Speed Control Knob
• Mounting Hardware (screws, brackets, etc. - specific types may vary)

4. Specifiche

5. Configurazione e installazione

This integrated unit is designed for ITX cases. Follow these steps for installation:

1. Preparare l'unità: If not pre-assembled, attach the fans to the radiator using the provided screws. The unit features a surrounding fixed vest to optimize airflow.



2. Mount in Case: Carefully position the integrated radiator and pump unit within your ITX case. Secure it using the appropriate mounting hardware.
3. Connect Water Cooling Loops: Connect your water blocks (CPU, GPU, etc.) to the radiator using G1/4" fittings and tubing. Ensure all connections are tight to prevent leaks. The unit features multi-directional water injection ports for flexible routing.



4. Fill with Coolant: Use the multi-directional water injection ports to fill the system with your chosen coolant. Monitor the coolant level through the acrylic transparent window. Fill until the system is full and all air bubbles are purged.



5. Connetti potenza e controllo: Connect the power supply interface and the PWM interface to your motherboard or power supply. If using, connect the manual speed control knob to the dedicated interface.

6. Istruzioni per l'uso

Once installed and filled, the BARROW DARIDP-30 360 is ready for operation:

• Accensione iniziale: Power on your computer. The pump and fans should start. Listen for any unusual noises and immediately check for leaks.
• Aria di spurgo: Allow the system to run for several hours, gently tilting your case to help dislodge any trapped air bubbles. You may need to top off the coolant as air is purged.
• Controllo della velocità: The unit supports dual-mode speed control.
  • Modalità PWM: If connected to a PWM header on your motherboard, the fan and pump speed will automatically adjust based on CPU temperature.
  • Modalità manuale: If the manual speed control knob is connected, turn it clockwise to activate manual mode and adjust the speed. To return to PWM mode, rotate the knob counter-clockwise to its end position.
• Monitoraggio: Regularly check the coolant level through the acrylic window and monitor system temperatures using software.

7. Manutenzione

• Controllo del livello del liquido di raffreddamento: Periodically check the coolant level through the acrylic window. Top up as needed.
• Ispezione delle perdite: Regularly inspect all fittings and tubing for any signs of leaks. Address any leaks immediately.
• Pulizia: Dust can accumulate on the radiator fins and fan blades, reducing cooling efficiency. Gently clean the radiator fins with compressed air and wipe fan blades with a soft cloth.
• Sostituzione del liquido di raffreddamento: It is recommended to flush and replace the coolant every 6-12 months, depending on the coolant type and usage, to prevent buildup and maintain optimal performance.

8. Risoluzione Dei Problemi

• Scarse prestazioni di raffreddamento:
  • Check for trapped air bubbles in the loop.
  • Ensure fans are spinning and radiator fins are clean.
  • Verify pump is running and coolant is flowing (check acrylic window).
  • Confirm correct fan/pump speed settings (PWM or manual).
• Pompa non in funzione:
  • Check power connections to the pump.
  • Ensure the system is filled with coolant; pumps should not run dry.
• Perdite:
  • Spegnere immediatamente il sistema.
  • Identificare la fonte della perdita.
  • Tighten fittings or replace damaged components/tubing.

9. Suggerimenti per l'utente

• Pre-fill and Test: Before installing the unit into your PC, consider performing an out-of-case leak test by connecting the pump to a power supply and running it with coolant for a few hours.
• Gestione dei cavi: Plan your cable routing carefully, especially in compact ITX cases, to ensure good airflow and a clean build.
• Coolant Choice: Use a high-quality, purpose-built PC coolant to prevent galvanic corrosion, algae growth, and pump damage.

10. Garanzia e supporto

Per reclami in garanzia, supporto tecnico o ulteriore assistenza, contattare il rivenditore o direttamente il produttore. Conservare la prova d'acquisto per la convalida della garanzia.