1. Introduzione
The Spider Farmer Inline Fan Kit with GGS Controller provides an intelligent ventilation solution for grow tents and enclosed areas. This system effectively removes unwanted odors, purifies air, and maintains optimal temperature and humidity through smart APP control and automated airflow adjustments. The kit includes an inline fan, carbon filter, ducting, and clamps, designed for efficient and quiet operation.
Figura 1: Oltreview of the Spider Farmer Inline Fan Kit components.
2. Istruzioni per l'installazione
2.1 Essential Components for Inline Fan Setup
- Ventilatore in linea: Helps circulate air within the indoor grow space, maintaining consistent temperature and humidity levels and distributing CO2 evenly.
- Filtro a carbone: Pulls the smell of plants from the air, catching odors to neutralize them. It also traps pollen and spores, keeping the air clean.
- Ducting Tube: Clamped or taped onto your inline duct fan, acting as a channel to route stagnant air away from your grow space.
Figure 2: Essential components and environmental guidelines for grow tents.
2.2 Connection and Installation
- Connect the Inline Fan to the GGS Controller: The GGS controller connects directly to the inline fan via an RJ12 port. No external power supply is needed for the GGS controller as it is powered by the inline fan.
- Attach Ducting and Clamps: Securely attach the flexible ducting to the inline fan and carbon filter using the provided stainless steel clamps. The ducting has an extended length of 13 ft (4m) and a built-in steel wire for reinforcement.
- Position the Carbon Filter: The carbon filter can be used as an exhaust filter (air blown into carbon filter) or an intake filter (air sucked through carbon filter). Ensure the arrow on the filter indicates the direction of airflow.
- Hang the System: Use the secure and stable hangers to mount the fan and filter system within your grow tent. The tool-free design allows for easy filter replacement.
- Connect Sensors and Adapters (Optional): The GGS controller supports additional connections for a Temp Humid Light Sensor and a Light & Fan Adapter. The Temp Humid Light Sensor obtains accurate measurements for temperature, humidity, and Vapor Pressure Deficit (VPD). The 2-in-1 Light & Fan Adapter connects to 0-10V lights and PWM clip fans. Use the RJ12 cord to connect to the DEV1 or DEV2 port on the GGS Controller, then select 'Blower (inline fan)' in the interface.
- General Installation Suggestions:
Figure 3: Simple and smart connection of the inline fan and GGS controller.
Figure 4: Ducting and clamps per installazione sicura.
Figure 5: Bidirectional universal carbon filter usage.
Figure 6: Secure and stable hangers for easy installation and maintenance.
Figure 7: Connecting optional sensors and adapters to the GGS controller.
Figure 8: Various installation suggestions for the ventilation system.
3. Istruzioni per l'uso
3.1 GGS Controller and APP Control
The GGS controller allows for scheduling and automatic control of your inline fan. Adjustments can be made directly on the controller or through the Spider Farmer APP.
Figure 9: GGS Controller interface for scheduling and automatic control.
- Quattro modalità operative: Select from various modes to suit your growing needs.
- Set Start & Stop Times: Program the fan to operate during specific periods.
- Set Running & Standby Speeds: Define fan speeds for active operation and standby.
- CO2 Device On/Off Control: Manage external CO2 devices through the controller.
Figure 10: Spider Farmer App interface for comprehensive control.
3.2 Regolazione del flusso d'aria
The app precisely adjusts the airflow from 0% to 100%, allowing for low noise operation at lower speeds and strong airflow when needed.
Video 1: Demonstration of app-controlled airflow adjustment and fan operation.
4. Manutenzione
4.1 Manutenzione del filtro al carbone
The carbon filter is designed for highly effective odor removal. It consists of multiple layers:
- Pre filtro
- Outer Mesh
- Charcoal Bed
- Maglia interna
Figure 11: Carbon filter layers and their filtration capabilities.
The durable and reusable hangers allow for tool-free filter replacement in seconds. Regularly check and replace the pre-filter and carbon bed as needed to maintain optimal performance.
5. Risoluzione Dei Problemi
5.1 Problemi comuni e soluzioni
- Fan not completely extinguishing when turned off: This is normal and typically due to minor voltage differences. It does not affect the fan's operation. If this is a concern, unplug the unit when not in use.
- Problemi generali di prestazioni: If you encounter any problems, please provide related videos or photos of the defective product and photos of all labels on the package to customer support for assistance.
6. Specifiche
6.1 Proprietà generali del prodotto
- Numero modello: inline fan kit with GGS controller
- Tipo: Ventilation, Inline Fan
- Applicazione: Air Purifier, Exhaust Fan
- Certificazione: CE
- Frequenza: Frequenza 50/60 Hz
- Caratteristiche: Low Noise, Strong Motor, Abrasion Resistant, High Airflow
- Codice EAN: 6973280375455
6.2 4-Inch Fan Specifications
| Parametro | Valore |
|---|---|
| Dimensione del condotto | 4 pollici |
| Energia | 27W ± 5% |
| Velocità della ventola | 3000 giri al minuto |
| Flusso d'aria | 205 piedi cubi |
| Rumore | 26.8 dB(A) |
| Voltage | CA 110-240 V |
| Lunghezza del cavo di alimentazione | 4.9 piedi (1.5 m) |
| Fan to Controller RJ12 Cord | 8.2 piedi (2.5 m) |
| Tipo di motore | EC (more efficient, safer, and longer lifespan) |
Figure 12: Detailed specifications for the 4-inch inline fan kit.
6.3 6-Inch Fan Specifications
| Parametro | Valore |
|---|---|
| Dimensione del condotto | 6 pollici |
| Energia | 62W ± 5% |
| Velocità della ventola | 3000 giri al minuto |
| Flusso d'aria | 402 piedi cubi |
| Rumore | 32 dB(A) |
| Voltage | CA 110-240 V |
| Lunghezza del cavo di alimentazione | 4.9 piedi (1.5 m) |
| Fan to Controller RJ12 Cord | 8.2 piedi (2.5 m) |
| Tipo di motore | EC (more efficient, safer, and longer lifespan) |
Figure 13: Detailed specifications for the 6-inch inline fan kit.
6.4 Noise Levels
Figure 14: Noise level comparison for 4-inch and 6-inch fans.
7. Suggerimenti per l'utente
- Wat ottimaletage for Grow Lights: For medical plants, many growers find that 30-50 watts per square foot is an ideal figure to achieve a decent harvest. Focus on the real power draw of your LED grow light rather than just the stated LED power.
- Multiple Lights for Larger Areas: When covering larger grow areas, using multiple smaller to medium-sized lights can provide better light distribution. This prevents light intensity from being concentrated in one area while outer edges receive insufficient light.
- Combining with HPS Lights: You can use this inline fan system with HPS (High-Pressure Sodium) lights. A ratio of LED to HID/HPS of 2:1 or 1:1 can lead to better growing results and higher quality buds.
8. Garanzia e supporto
8.1 Inline Fan or Filter Kits Warranty
- Entro 1 anno: Accessories, repairs, and services are provided free of charge.
- 1 year - 2 years: Free accessories are provided. The buyer is responsible for the maintenance fee and two shipping costs.
Note for Inline Fan: Operating conditions for warranty purposes are ambient temperature around 30℃ and relative humidity 15-65%.
8.2 Supporto
If you have any questions or require support, please send related videos or photos of the defective product and photos of all labels on the package to customer service. This will help expedite the troubleshooting and resolution process.
