Manuali+

GLEDOPTO GL-C-601P

GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller User Manual

Model: GL-C-601P

1. Introduzione

The GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller is a versatile smart lighting solution designed for controlling various LED strip types. It supports RGBCCT, RGBW, RGB, CCT, and Dimmer modes, offering comprehensive control over your lighting environment. Operating on the ZigBee 3.0 protocol, it ensures stable connectivity with a wide range of smart home platforms.

Le caratteristiche principali includono:

  • Whole-Home Integration: Compatible with ZigBee-certified hubs such as Philips Hue, Amazon Echo Plus, Homey, Conbee II, and SmartThings for seamless smart home integration.
  • Ampio volumetageSupporto: Works with 5–24V PWM dimmable LED strips.
  • Maggiore sicurezza: Features a user-replaceable 20A pluggable fuse for robust protection against overcurrent and short circuits.
  • Opzioni di controllo flessibili: Control via your ZigBee network using a smartphone app or voice assistant (e.g., Amazon Alexa). Can also be paired with an optional GLEDOPTO 2.4G RF remote for standalone functionality.
  • Installazione senza sforzo: Equipped with redesigned WAGO push-in connectors for quick, screwless wiring. Offers three power input types: V+/V- terminal, DC5.5×2.1mm jack, and Type-C port.
  • Illuminazione personalizzata: Innovative Mix mode allows blending color and white light, with 16 million hues and a 2700K–6500K temperature range adjustable via app, voice, remote, or the tactile push switch.

2. Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni di sicurezza prima dell'installazione e dell'uso. Il mancato rispetto di queste istruzioni può causare scosse elettriche, incendi o altri pericoli.

  • This device is designed for use with DC 5-24V PWM dimmable LED strip lights only. Do NOT use with Addressable RGBIC LED strips.
  • Garantire l'alimentazione voltage matches the requirements of your LED strip and controller (DC 5-24V).
  • Always disconnect power before installing or servicing the controller.
  • The controller includes a user-replaceable 20A fuse for protection. If the fuse blows, replace it with a fuse of the same rating.
  • This device requires a standard ZigBee gateway (e.g., Philips Hue, Amazon Echo Plus, Homey, Conbee II, SmartThings) for smart home integration.
  • If no ZigBee gateway is available, a GLEDOPTO 2.4G RF remote control or wall switch is required for operation. This device is only compatible with the GLEDOPTO 2.4G RF remote control.
  • Keep the device away from water, moisture, and extreme temperatures (-20°C to 45°C).
  • Do not attempt to disassemble or modify the controller beyond replacing the fuse.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

  • 1x ZigBee 3.0 Five in One LED Controller Pro Max (GL-C-601P)
  • 1x Manuale utente
  • 1 adesivo da 3 cm
  • 1x 20A Pluggable Fuse (pre-installed or spare)
Diagram showing the contents of the GLEDOPTO GL-C-601P package: packaging box, 3cm sticker, user instruction, 5A pluggable fuse, and the Zigbee Pro Max 5 in 1 Smart LED Controller.
Figura 3.1: Contenuto della confezione

4. Specifiche

Parametro Valore
Modello n. Codice articolo: GL-C-601P
Ingresso volumetage DC 5-24V
Corrente di uscita totale 15A massimo
Uscita corrente/canale 10A massimo
Tipo-C voltage 5V
Corrente di tipo C 3A massimo
Massimo Carica potenza 360W
Tasso del IP Grado di protezione IP20
Materiale PC ignifugo
Peso netto (NW) 70.8g
Peso lordo (GW) 81.6g
Dimensioni (L*W*H) 129 x 50 x 23 mm
Temperatura di esercizio -20°C a 45°C
Distanza remota 30 metri
Modalità di connessione ZigBee 3.0
Luci applicabili RGBCCT, RGBW, RGB, WWCW Dimmer LED Strip Light
Metodo controllato APP, Voice, 2.4G RF Remote
Certificazioni CCC, CE, EMC, FCC, LVD, ROHS
Garanzia 2 anni
Diagram showing the product structure and size of the GLEDOPTO GL-C-601P controller, with dimensions 129mm length, 50mm width, and 23mm height. Labels indicate the 20A fuse, output wiring terminal, indicator, Opt button, Reset button, DC/Type-C port, and V+/V- input.
Figure 4.1: Product Structure and Size
Table of product parameters for the GLEDOPTO GL-C-601P controller, listing Model No., Input Voltage, Total Output Current, Output Current/Channel, Type-C Voltage, Type-C Current, IP Rate, Material, N.W., G.W., Size, and Operating Temperature.
Figura 4.2: Parametri dettagliati del prodotto
Comparison table of wireless protocols: Zigbee 3.0, Wifi, and Bluetooth, showing differences in power consumption, stability, anti-interference ability, security & privacy, and number of product connections.
Figure 4.3: Wireless Protocol Comparison

5. Impostazione

5.1 Metodi di input di potenza

The controller offers three convenient ways to connect power:

  1. V+/V- Power Interface: Standard screw terminals for direct wire connection.
  2. Presa CC da 5.5x2.1 mm: For use with a standard DC power adapter.
  3. Interfaccia di tipo C: For 5V power input, typically from a USB wall adapter (not PC USB).
Diagram illustrating the three input methods for the GLEDOPTO GL-C-601P controller: V+/V- power interface, 5.5x2.1mm DC Socket, and Type-C interface.
Figure 5.1: Three Power Input Methods

5.2 Schema elettrico

Connect your LED strip to the output terminals according to the type of strip you are using. The controller supports RGBCCT, RGBW, RGB, CCT, and Dimmer configurations. Ensure correct polarity (V+ and V-) and channel connections (R, G, B, W, C, V-).

Detailed wiring diagram for the GLEDOPTO GL-C-601P controller, showing connections for RGB CCT, RGBW, RGB, CCT, and Dimmer LED strips. Each configuration illustrates the required DC power supply and the specific output terminals to use for each color channel.
Figure 5.2: Wiring Diagram for Various LED Strip Types

5.3 ZigBee Gateway Pairing

To integrate the controller into your smart home system, you will need a compatible ZigBee gateway (e.g., Philips Hue Bridge, Amazon Echo Plus, Homey, Conbee II, SmartThings). Follow the instructions provided by your specific ZigBee gateway to add a new device. The controller will typically enter pairing mode automatically when powered on for the first time or after a reset.

Resetting the Controller for Pairing: If the controller does not pair, or if you wish to pair it with a new gateway, long press the 'Reset' button on the device for 5 seconds until the indicator light changes, signaling it is ready for pairing.

6. Istruzioni per l'uso

The GL-C-601P controller offers multiple ways to control your LED strips:

6.1 Key Functions on the Device

Diagram showing the key functions of the GLEDOPTO GL-C-601P controller: Reset button, Opt button, Push button, and Indicator light. Descriptions for short press and long press actions are provided for each button.
Figure 6.1: Controller Key Functions
  • Pulsante di reset:
    • Short press: Switches the frequency (see Section 6.4).
    • Long press (5 seconds): Resets the controller to factory settings, useful for pairing.
  • Pulsante di scelta:
    • Short press: Switches the current device function/mode (e.g., RGBCCT, RGBW, RGB, CCT, Dimmer).
    • Long press (5 seconds): Accesses power-on status settings (see Section 6.3).
  • Premi il bottone:
    • Pressione breve: accende/spegne la striscia LED.
    • Long press: Adjusts brightness. (Long press increases brightness; release and long press again decreases brightness).
  • Spia luminosa: Displays different colors corresponding to the current operating mode.

6.2 Five Mode Switching

The controller supports five distinct modes for different LED strip types. Short press the 'Opt' button to cycle through these modes:

  • RGBCCT
  • Colore RGBW
  • Colore RGB
  • CCT (temperatura colore)
  • Oscuratore
Diagram illustrating the five mode switching capability of the GLEDOPTO GL-C-601P controller. Icons represent RGB CCT, RGBW, RGB, CCT, and Dimmer modes. A short press of the 'Opt' button switches the current device mode.
Figure 6.2: Five Mode Switching

6.3 Funzione di memoria di spegnimento

The controller offers two optional power-on behaviors after a power failure:

  1. Remember State: The lights will return to their last on/off state and brightness/color settings.
  2. Lights Up by Default: The lights will turn on to a default setting (e.g., full brightness white) regardless of their state before power loss.

To switch between these modes, long press the 'Opt' button for more than 5 seconds. The indicator light will flash blue 3 times to confirm the change.

Illustration of the power-off memory function, showing two modes: 'Remember the state of the on/off before power failure' and 'Lights up by default when powered on'. Instructions indicate long pressing the 'Opt' key for more than 5 seconds and observing the indicator light flashing blue 3 times.
Figura 6.3: Funzione di memoria di spegnimento

6.4 Impostazioni di frequenza

The controller allows for one-touch frequency switching to adapt to different power supplies and reduce noise. Short press the 'Reset' button to cycle through the frequencies:

Frequenza Lampeggia
600 Hz 1 volta
800 Hz 2 volte
1000 Hz 3 volte
2000 Hz 4 volte
4000 Hz 5 volte
8000 Hz 6 volte
Diagram showing frequency settings for the GLEDOPTO GL-C-601P controller. It lists frequencies from 600Hz to 8000Hz and the corresponding number of indicator light flashes. Instructions mention one-touch frequency switching using the Reset button.
Figure 6.4: Frequency Settings

6.5 Controllo dell'app

Once paired with a ZigBee gateway, you can control the LED strip via your smart home app. This typically allows for:

  • Adjusting 16 million colors.
  • Setting brightness levels (1% to 100%).
  • Adjusting color temperature (2700K–6500K).
  • Creating and activating custom scenes.
Screenshot of a mobile app interface for controlling LED lighting, showing color wheel, brightness slider, and color temperature adjustment. This demonstrates how to set the right ambiance with 16 million colors, adjustable brightness, and color temperature.
Figura 6.5: Interfaccia di controllo dell'app

6.6 Controllo vocale

With a compatible ZigBee gateway and voice assistant (e.g., Amazon Alexa), you can control your lights using voice commands. Exampincludono:

  • "Alexa, accendi la luce del soggiorno."
  • "Alexa, set to purple."
  • "Alexa, aumenta al 70%."
Image demonstrating voice control with Amazon Alexa and Google Home devices, showing example commands like 'Turn on the living room light', 'set to purple', and 'increase to 70%'. Also shows a 2.4G RF remote control for scene memory functions.
Figura 6.6: Integrazione del controllo vocale

6.7 Telecomando RF 2.4G (opzionale)

If you are using a GLEDOPTO 2.4G RF remote control (sold separately), you can control the LED strip directly without a ZigBee gateway. The remote typically offers:

  • Controllo di accensione/spegnimento.
  • Brightness and color adjustments.
  • Scene memory functions (S1, S2, S3, S4 buttons). Long press a scene button to save the current settings; short press to activate a saved scene.

6.8 Mix Mode (RGB + White Light)

The Mix mode allows you to blend RGB colors with white light for unique lighting effects. This is particularly useful for RGBCCT and RGBW strips.

  • When the color loop in your app moves to the edge, only the RGB light turns on.
  • When the color loop moves to the middle, both the RGB light and White light turn on together, allowing for richer, more nuanced colors.
Illustration of RGB+White Light Mix mode. The top image shows the app color wheel with the selector at the edge, resulting in only RGB light. The bottom image shows the selector in the middle, resulting in both RGB and White light turning on together.
Figure 6.7: RGB+White Light Mix Mode

7. Manutenzione

  • Pulizia: Pulisci delicatamente il controller con un panno asciutto e morbido. Non utilizzare prodotti chimici aggressivi o detergenti abrasivi.
  • Ambiente: Ensure the controller is installed in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • Sostituzione fusibile: If the LED strip stops working, check the 20A pluggable fuse. If it is blown, replace it with a new fuse of the same rating (20A). Always disconnect power before replacing the fuse.

8. Risoluzione Dei Problemi

Problema Possibile causa Soluzione
LED strip not turning on.
  • Nessuna alimentazione al controller.
  • Cablaggio errato.
  • Fusibile bruciato.
  • LED strip faulty.
  • Controllare alimentazione e collegamenti.
  • Verificare il cablaggio secondo la Sezione 5.2.
  • Controllare e sostituire il fusibile da 20 A se necessario.
  • Test the LED strip with another power source if possible.
Controller not responding to app/voice commands.
  • Not paired with ZigBee gateway.
  • Segnale ZigBee debole.
  • Gateway/app issue.
  • Ensure controller is paired with your ZigBee gateway (Section 5.3).
  • Move controller closer to the gateway or use a ZigBee repeater.
  • Restart your ZigBee gateway and smart home app.
Telecomando non funzionante.
  • Telecomando non associato.
  • Batteria del telecomando scarica/scarica.
  • Incorrect remote type.
  • Ensure the GLEDOPTO 2.4G RF remote is correctly paired.
  • Sostituire la batteria del telecomando.
  • Confirm you are using a GLEDOPTO 2.4G RF remote control.
Colors/brightness not adjusting correctly.
  • È stata selezionata la modalità errata.
  • Problema di cablaggio.
  • LED strip type mismatch.
  • Short press the 'Opt' button to cycle through modes and select the correct one for your LED strip.
  • Check output wiring for correct channel connections.
  • Ensure your LED strip is compatible with the selected mode (e.g., RGBW strip in RGBW mode).

9. Suggerimenti per l'utente

  • Verifica della compatibilità: Always verify that your existing ZigBee gateway and LED strip type are compatible with the GL-C-601P controller before installation.
  • Potenza del segnale: For optimal performance, ensure the controller is within a reasonable range of your ZigBee gateway or a ZigBee repeater to maintain a strong signal.
  • Alimentazione elettrica: Use a stable and appropriately rated DC power supply (5-24V) that matches the total wattage requisiti della tua striscia LED.

10. Garanzia e supporto

The GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller comes with a Garanzia di 2 anno dalla data di acquisto, coprendo i difetti di fabbricazione in condizioni di normale utilizzo.

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Provide your model number (GL-C-601P) and a detailed description of the issue for faster assistance.

Documenti correlati - Codice articolo: GL-C-601P

Preview Manuale utente del controller intelligente LED Pro+ Zigbee 3in1/5in1 GLEDOPTO
Istruzioni complete per l'uso di GLEDOPTO Zigbee 3in1 e 5in1 LED Smart Controller Pro+ (GL-C-201P, GL-C-202P). ...
Preview Istruzioni per l'uso del controller intelligente LED Zigbee 5in1 GLEDOPTO Pro Max
Manuale di istruzioni dettagliato per l'utente del GLEDOPTO Zigbee 5in1 LED Smart Controller Pro Max (modello GL-CI-601P). Include specifiche, funzioni dei pulsanti, spie luminose, metodi di reset, associazione di gateway e telecomandi RF, schemi elettrici, stato di accensione e impostazioni di frequenza.
Preview GLEDOPTO ZigBee Controller Pro User Instruction & RGB+CCT Remote Control Guide
Comprehensive user manual for the GLEDOPTO ZigBee Controller Pro and RGB+CCT Remote Control (GL-RC-006Z). Covers features, wiring, gateway connection, reset procedures, remote control operation, mode descriptions, and compatibility with major smart home systems like Philips Hue, Amazon Echo Plus, and SmartThings.
Preview Manuale utente e guida alla compatibilità del controller Zigbee Pro di Gledopto
Istruzioni per l'uso del Gledopto Zigbee Controller Pro, inclusi schemi elettrici, compatibilità del gateway e associazione del telecomando. Scopri come connettere e utilizzare i tuoi dispositivi Gledopto Zigbee con diversi sistemi di domotica.
Preview Istruzioni per l'uso del controller dimmer LED GLEDOPTO Pro
Istruzioni per l'utente del GLEDOPTO LED Dimmer Controller Pro (GL-C-009P), che descrivono in dettaglio i collegamenti dei cavi, l'associazione del gateway, le procedure di ripristino e la compatibilità con il telecomando.
Preview Manuale utente e specifiche dell'illuminazione intelligente GLEDOPTO RGB+CCT
Istruzioni per l'utente complete e specifiche tecniche per i prodotti di illuminazione intelligente GLEDOPTO RGB+CCT, inclusi telecomandi, proiettori e luci da giardinoamps. Scopri di più su caratteristiche, compatibilità, installazione e funzionamento.