DESLOC A100F Keyless Entry Smart Door Lock Instruction Manual

Prodotto finitoview

The DESLOC A100F is a keyless entry smart door lock designed for front doors, offering multiple unlocking methods including fingerprint, keypad, and physical keys. It features easy installation and a long-lasting battery, providing enhanced security and convenience for your home.

Figure 1: DESLOC A100F Smart Lock, including the exterior unit, two physical keys, and four AA batteries.

Caratteristiche principali:

• Metodi di sblocco multipli: Fingerprint, PIN code, and physical keys for versatile access.
• Riconoscimento rapido delle impronte digitali: 99% recognition rate with a 0.3-second recognition time.
• Batteria a lunga durata: Powered by 4 AA batteries (included), providing up to 12 months of operation.
• Potenza di emergenza: Equipped with a Type-C backup power port to prevent lockout due to dead batteries.
• Sicurezza avanzata: Features IP54 waterproof and dustproof rating, robust lock cylinder, and anti-peeping password input.
• Funzione di blocco automatico: Automatically locks the door after a set period (3-30 seconds) for added peace of mind.
• Design durevole: Tested for extreme temperatures (-22°F to 158°F), salt spray, motor durability (200,000 cycles), and drill resistance.
• Installazione semplice: Designed for quick DIY installation, typically within 15 minutes, fitting most standard doors.

Specifiche

Componenti finitiview

The DESLOC A100F smart lock package includes the following components:

• Serratura esterna: The outer unit with keypad, fingerprint reader, and keyhole.
• Front Rubber Pad: Provides weather sealing and protection for the exterior lock.
• Piastra di montaggio: Secures the lock assembly to the door.
• Serratura interna: The inner unit with battery cover and thumb turn.
• Catenaccio: The locking mechanism that extends into the door frame.
• Reset Tool: Used for resetting the lock to factory defaults.
• Piatto d'urto: Installed on the door frame to receive the deadbolt.
• Chiavi meccaniche: Physical keys for emergency unlocking.
• Deadbolt/Strike Plate Screws: Screws for securing the deadbolt and strike plate.
• Mounting Plate Screws: Screws for securing the mounting plate.
• Interior Lock Screws: Screws for securing the interior lock to the mounting plate.

Refer to the included user manual PDF for a visual diagram of all components.

Guida all'installazione

1. Preparazione della porta

• Ensure your door has a thickness between 1-3/8" and 2" (35mm-50mm).
• The cross-bore diameter should be 2-1/8" (54mm).
• The backset size (distance from door edge to center of cross-bore) should be 2-3/8" or 2-3/4" (60mm or 70mm).
• If the deadbolt requires adjustment for a 70mm backset, turn the faceplate 180° to extend its length.

Consult the door size and compatibility diagram in the original user manual for visual guidance.

2. Installing the Deadbolt

1. Fix the deadbolt into the door edge using the provided deadbolt screws. Ensure the word "TOP" on the deadbolt is facing upwards.
2. Make sure the deadbolt is in the retracted (unlocked) position.

3. Attaching the Exterior Lock

1. Attach the exterior lock to the front rubber pad.
2. Carefully route the cable from the exterior lock through the door hole.
3. Slide the paddle through the deadbolt.
4. Thread the cable through the door hole, ensuring it is positioned below the deadbolt. The paddle must be in a horizontal position.

4. Installing the Mounting Plate and Interior Lock

1. Peel the tape off the mounting plate.
2. Ensure the cable from the exterior lock is positioned near the mounting plate.
3. Fix the mounting plate to the door using the mounting plate screws.
4. Connect the cable from the exterior lock to the wire connector on the interior lock assembly, ensuring a secure connection.
5. Insert the paddle into the hole at the back of the thumb turn on the interior lock.
6. Open the battery cover of the interior lock.
7. Fix the interior lock body to the mounting plate using the interior lock screws.
8. Importante: When pressing the indoor panel against the door, conceal the wires inside the door or place them in the designated wire-housing areas on the indoor panel to prevent pinching.

5. Battery Installation and Lock Direction Setting

1. Inserire 4 batterie AA nel gruppo interno.
2. Chiudere il coperchio della batteria.
3. Set Lock Direction: The lock requires the deadbolt to be engaged to identify the open direction. After installation, ensure the deadbolt is engaged. If the deadbolt is retracted, a red light will flash with a sound alarm. Rotate the thumb turn to engage the deadbolt and set the opening direction.

Istruzioni per l'uso

Allarme batteria scarica

When the battery is low, the lock will emit 6 short beeps and the red light will flash 6 times.

Blocco per PIN errato

After 3 unsuccessful PIN code entries, the keypad will lock for 180 seconds, accompanied by a light flash and an alarm.

Reimposta blocco

To reset the lock to factory defaults:

1. Press the reset button for 3 seconds (located on the interior assembly).
2. You will hear one long beep and see a blue light flash once, followed by three short beeps and the red light flashing three times.
3. After reset, the Master PIN code will revert to 123456, and all User PIN codes and User fingerprints will be erased.

Modifica il codice PIN principale

The factory default Master PIN code is 123456. It is recommended to change this code upon receiving the lock.

Passaggi:

• Press "Change Master PIN code" button.
• Entrare 123456 quindi premere #.
• Premere 4 quindi premere #.
• Enter your new 6-digit Master PIN code then press #.
• Repeat your new 6-digit Master PIN code then press #.

Add User PIN Code (Up to 98 codes)

Passaggi:

• Press "Add User PIN code" button.
• Enter your Master PIN code then press #.
• Enter a 2-digit ID number (02-99) then press #.
• Enter the new 4-9 digit User PIN code then press #.
• Repeat the new 4-9 digit User PIN code then press #.

Add User Fingerprint (Up to 50 fingerprints)

Passaggi:

• Press "Adding User fingerprint" button.
• Enter your Master PIN code then press #.
• Enter a 2-digit ID number (01-50) then press #.
• Press your finger on the fingerprint reader 5 times as prompted.

Delete User PIN Codes

Delete some User PIN codes:

• Press "Delete some of the User PIN codes" button.
• Enter your Master PIN code then press #.
• Enter the 2-digit ID number (02-99) of the PIN code to delete then press #.
• Repeat the 2-digit ID number then press #.

Delete all User PIN codes:

• Press "Delete all User PIN codes at a time" button.
• Enter your Master PIN code then press #.
• Premere 3 quindi premere #.
• Premere 1 quindi premere #.

Delete User Fingerprints

Delete some User fingerprints:

• Press "Delete some of the User fingerprints" button.
• Enter your Master PIN code then press #.
• Enter the 2-digit ID number (01-50) of the fingerprint to delete then press #.
• Repeat the 2-digit ID number then press #.

Delete all User fingerprints:

• Press "Delete all User fingerprints at a time" button.
• Enter your Master PIN code then press #.
• Premere 3 quindi premere #.
• Premere 2 quindi premere #.

Delete All User PIN Codes and All User Fingerprints

This action will delete all User PIN codes and User fingerprints but will not affect the Master PIN code.

Passaggi:

• Press "Delete all User at the same time" button.
• Enter your Master PIN code then press #.
• Premere 3 quindi premere #.
• Premere 3 quindi premere #.

Modalità blocco automatico Auto

The lock will automatically lock after a certain duration (3-30 seconds) when this mode is enabled.

Steps to enable/set:

• Press "Auto lock mode" button.
• Enter your Master PIN code then press #.
• Premere 5 quindi premere #.
• Enter the desired auto-lock time (3-30 seconds) then press #.

Cancel Auto Lock Function

This will keep the door open indefinitely until manually locked.

Passaggi:

• Press "Cancel Auto lock function" button.
• Enter your Master PIN code then press #.
• Premere 5 quindi premere #.
• Entrare 00 quindi premere #.

Attiva/disattiva l'audio

You can mute or unmute the lock's sound (default is on).

Steps to mute:

• Press "Turn Sound on/off" button.
• Enter your Master PIN code then press #.
• Premere 1 quindi premere #.
• Premere 2 quindi premere #.

Steps to unmute:

• Press "Turn Sound on/off" button.
• Enter your Master PIN code then press #.
• Premere 6 quindi premere #.

Nota: When the lock is muted, you will not hear any beeping for programming, low battery alerts, or system alerts.

Light and Sound Indications

The lock provides various light and sound signals to indicate its status and operations:

Manutenzione e risoluzione dei problemi

Suggerimenti per la Manutenzione:

• Regularly check battery levels and replace all four AA batteries when the low battery alarm sounds.
• Keep the keypad and fingerprint reader clean and free from dirt or debris.
• Evitare di utilizzare detergenti abrasivi o solventi sulla superficie della serratura.
• Ensure the door and frame are properly aligned to prevent excessive wear on the deadbolt mechanism.

Risoluzione dei problemi:

• Il lucchetto non risponde: Check battery levels. If batteries are dead, use the physical key or connect a Type-C power bank to the emergency power port.
• Incorrect PIN/Fingerprint not recognized: Ensure correct PIN is entered or finger is placed properly on the sensor. If multiple incorrect attempts occur, the lock will temporarily disable the keypad.
• Lock does not engage/disengage smoothly: Check for obstructions in the door frame or deadbolt path. Ensure the deadbolt direction is correctly set after installation.
• Lost Master PIN code: Perform a factory reset (see "Reset Lock" section) to revert to the default Master PIN code (123456). Note that this will erase all user data.

Garanzia e supporto

The DESLOC A100F Smart Lock comes with a 12-month warranty from the date of purchase.

For technical assistance, troubleshooting, or warranty claims, please contact DESLOC customer support. Refer to the official product page or your purchase documentation for contact details.

The product video highlights "Excellent Service" and shows a customer service team, indicating support is available.