Introduzione
Thank you for choosing the Antec NE1000G M ATX3.0 1000W Full Modular Power Supply. This power supply is designed to deliver stable and efficient power to your PC system, featuring ATX3.0 and PCIe 5.0 compatibility, 80 PLUS Gold certification, and a full modular design for optimal cable management. This manual provides essential information for proper installation, operation, and maintenance.
Caratteristiche principali
- ATX3.0 & PCIe 5.0 Compatible: Meets high standards for reliability and power efficiency, ensuring compatibility with modern graphics cards like NVIDIA GeForce RTX 40 Series.
- Certificazione 80 PLUS Gold: Achieves high power efficiency, reducing energy waste and operating costs.
- High-Quality JP Capacitors: Equipped with Japanese capacitors for tight voltage regulation, minimal ripple and noise, and enhanced system performance.
- PhaseWave Design (LLC + DC-DC): Server-class LLC design with synchronous rectification based on a DC-DC topology for unparalleled power delivery efficiency and stability.
- CircuitShield: Comprehensive industrial-grade protection suite including OCP, OVP, UVP, SCP, OPP, OTP, SIP, and NLO for system safety.
- 120mm FDB Silent Fan: Features a whisper-quiet, fluid-dynamic bearing (FDB) fan for high airflow, durability, and longevity.
- Zero RPM Manager: Fan operates only when necessary, extending lifespan and ensuring quieter operation by minimizing noise levels.
- Full Modular Cable Management: Allows users to connect only necessary cables, improving airflow and cooling performance.
- Dimensioni compatte: Designed to be smaller than typical power supplies, fitting a wider range of computer cases.
Impostare
Fasi di installazione
- Prepara il tuo sistema: Assicurati che il computer sia spento e scollegato dalla presa a muro. Apri il case del PC per accedere all'area di montaggio dell'alimentatore.
- Montare l'alimentatore: Carefully slide the Antec NE1000G M into the designated power supply bay in your PC case. Secure it with the provided screws.
- Collegare i cavi essenziali:
- Cavo della scheda madre ATX a 24 pin: Collegare il cavo di alimentazione principale alla scheda madre.
- CPU Power Cables (4+4 pin or 8 pin EPS): Connect the appropriate CPU power cable(s) to your motherboard.
- PCIe Power Cables (6+2 pin or 12VHPWR): Connect the necessary PCIe cables to your graphics card(s). For PCIe 5.0 GPUs, use the dedicated 12VHPWR cable.
- Cavi di alimentazione SATA: Connect to your storage drives (SSDs, HDDs) and other SATA-powered devices.
- Cavi periferici (Molex): Connect to any other devices requiring Molex power.
- Gestione dei cavi: Utilize the full modular design to connect only the cables you need. Route cables neatly behind the motherboard tray or in designated channels to improve airflow and aesthetics.
- Sicuro e vicino: Double-check all connections to ensure they are firm. Close your PC case and secure it.
- Accensione: Plug your PC back into the wall outlet and power it on.
Istruzioni per l'uso
Accensione/spegnimento
To power on your system, ensure the power supply's main switch (located on the back of the unit) is in the 'I' (On) position. Then, press the power button on your computer case. To power off, shut down your operating system normally. For a complete power cut, switch the power supply's main switch to the 'O' (Off) position and unplug the power cord.
Zero RPM Manager
The Antec NE1000G M features a Zero RPM Manager, which controls the 120mm FDB fan. In Zero RPM mode, the fan remains off at low to moderate loads, providing silent operation. As the power supply load increases and internal temperatures rise, the thermal sensors activate the fan to provide optimal cooling. This intelligent control extends the fan's lifespan and minimizes noise.
Manutenzione
Pulizia
Regular cleaning helps maintain optimal performance and extends the lifespan of your power supply. Ensure the power supply is completely disconnected from all power sources before cleaning. Use compressed air to gently remove dust from the fan grille and internal components. Avoid using liquid cleaners or abrasive materials.
Manutenzione della ventola
The 120mm FDB fan is designed for long-term reliability. No specific lubrication or maintenance is required for the fan itself. If you notice unusual noises or reduced airflow, ensure the fan is free from obstructions and dust buildup. Do not attempt to disassemble the power supply to access the fan, as this will void the warranty and poses an electrical hazard.
Risoluzione dei problemi
Problemi comuni e soluzioni
- Nessun potere:
- Check if the power cable is securely plugged into both the power supply and the wall outlet.
- Ensure the power supply's main switch is in the 'I' (On) position.
- Verify all internal power connections (24-pin ATX, CPU, PCIe) are firmly seated.
- Prova la presa a muro con un altro dispositivo per verificare che sia alimentata.
- Instabilità/arresti anomali del sistema:
- Assicurati che la tua alimentazione siatage è sufficiente per tutti i tuoi componenti.
- Verificare la presenza di connessioni dei cavi allentate.
- Monitor system temperatures to rule out overheating.
- La ventola non gira:
- The Zero RPM Manager keeps the fan off at low loads. If the system is under load and the fan is still not spinning, check for obstructions.
- If the fan never spins even under heavy load, contact support.
CircuitShield Protection
The Antec NE1000G M is equipped with CircuitShield, a comprehensive suite of industrial-grade protections to safeguard your system. These include:
- OCP (protezione da sovracorrente)
- OVP (oltre voltage Protezione)
- UVP (sotto il voltage Protezione)
- SCP (Protezione da cortocircuito)
- OPP (protezione da sovratensione)
- OTP (Protezione da sovratemperatura)
- SIP (Surge & Inrush Protection)
- NLO (No Load Operation)
If any of these protections are triggered, the power supply may shut down to prevent damage. If this occurs, disconnect the power supply, check for any obvious faults (e.g., short circuits, overloaded components), and then attempt to restart your system.
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Modello | NE1000G M ATX3.0 |
| Cosatage | 1000 Watt |
| Certificazione 80 PLUS | Oro |
| Fattore di forma | ATX |
| PFC | PFC attivo |
| Modular | Completamente modulare |
| Dimensioni della ventola | 120mm FDB (Fluid Dynamic Bearing) |
| Condensatori | Condensatori giapponesi |
| Dimensioni (L x P x A) | 5.51 x 5.91 x 3.39 pollici (140 x 150 x 86 mm) |
| Peso | 7.71 libbre |
| Protezioni | OCP, OVP, UVP, SCP, OPP, OTP, SIP, NLO |
| Dispositivi compatibili | Desktop |
Garanzia e supporto
Informazioni sulla garanzia
The Antec NE1000G M ATX3.0 1000W Full Modular Power Supply comes with a Garanzia di 10 anno from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from misuse, accident, modification, unauthorized repair, or improper installation.
Contatta il supporto
For technical assistance, warranty claims, or product inquiries, please visit the official Antec website or contact their customer support. Refer to the Antec websito per le informazioni di contatto e le risorse di supporto più aggiornate.
Antec Ufficiale Websito: www.antec.com
